Glide wax

Impresses with its extreme abrasion resistance and wide range of applications. Excellently suited as transport wax. Ironing temperature 125~135 °C. Product advantages Holmenkol Betamix Red: BETAMIX World Cup Skiwax RED Highest quality 12 base and training wax based on hydrocarbon For all types of snow For snow temperatures from -4° to -14° C 150 gr

The new liquid wax variant of the top seller Betamix now also in liquid form. Very easy to apply with a fleece or sponge and allow to soak in briefly. Brush out with a nylon or horsehair brush and you're done. The Holmenkol Betamix red liquid is a fluorine-free training wax for waxing alpine skis, cross-country skis and snowboards. Product advantages Holmenkol Betamix Red Liquid: Betamix RED Liquid New liquid wax variant of the top seller Betamix. For all types of snow For snow temperatures from -4° to -14°C Quick and easy application

Impresses with its extreme abrasion resistance. Ironing temperature 115~125 °C. Product advantages Holmenkol Alphamix Yellow: Highest quality base, base and training wax based on hydrocarbon 150 gr For soft, new and fine-grained snow For snow temperatures from 0° to -4°C

Practical set of 2 with one bar each of Alphamix YELLOW and Betamix RED. Ironing temperature 115~145 °C. Product advantages Holmenkol Worldcup Mix Hot Yellow-Red: Highest quality base and training wax based on hydrocarbon For all types of snow For snow temperatures from 0° to -14°C 2x35 gr

Organic easy wax for the care of all bases. Ensures optimum gliding properties and cares for the base. Quick and easy to use. With polishing filz for working in. Environmentally friendly air spray. Biodegradable. Product advantages Holmenkol Natural Skiwax Spray 200ml: Biodegradable ski wax spray Quick and easy application 24/7: for all types of snow and temperatures Ensures optimum gliding properties Ideally suited for use on freeride skis and snowboards

Impresses with its extreme abrasion resistance. ironing temperature 135~145 °C Product advantages Holmenkol Ultramix Blue: Highest quality base and training wax based on hydrocarbon For cold, old and aggressive snow For snow temperatures from -8° to -20°C 150 gr

Perfectly suited for the gentle removal of wax, grease, oil and resin from bases, clothing and hands. Optimal dosage. Product advantages Holmenkol Wax Remover/Cleaner 500ml:    Special cleaner and wax remover Optimal dosage     

Skin impregnation, suitable for all types of snow and temperatures. Prevents snow and ice from sticking to the ski skin. Care for all types of touring skins and ensures optimum gliding properties. Environmentally friendly and fur-friendly air spray in a practical 125 ml can. Application: spray on before the ski tour, allow to dry and lightly iron on with a waxing iron (100 °C).

The new liquid wax variant of the top seller Alphamix is now also available in liquid form. Very easy to apply with a fleece or sponge and allow to soak in briefly. Brush out with a nylon or horsehair brush and you're done. The Holmenkol Alphamix yellow liquid is a fluorine-free training wax for waxing alpine skis, cross-country skis and snowboards. Product advantages Holmenkol Alphamix YELLOW Liquid: Alphamix YELLOW Liquid New liquid wax variant of the top seller Alphamix. For all types of snow For snow temperatures from 0° to -4°C Quick and easy application

Anti-ice spray for ski decor. Prevents snow and ice from sticking to the top of the ski. Application: spray on before the ski tour and allow to dry. Environmentally friendly air spray.

The new liquid wax variant of the top seller Ultramix now also in liquid form. Very easy to apply with a fleece or sponge and allow to soak in briefly. Brush out with a nylon or horsehair brush and you're done. The Holmenkol Betamix Blue liquid is a fluorine-free training wax for waxing alpine skis, cross-country skis and snowboards. Product advantages Holmenkol Ultramix BLUE Liquid: Ultramix BLUE Liquid New liquid wax variant of the top seller Ultramix. For all types of snow For snow temperatures from -8° to -20°C Quick and easy application

Perfectly suited for the gentle removal of wax, grease, oil and resin from bases, clothing and hands. Optimal dosage. Product advantages Holmenkol Wax remover spray 250ml: Deep cleaning Fast drying

Cleaner for ski tour skins and Nordic climbing skins.Gently cleans the skins of dirt and wax residues. Climbing and gliding properties are improved again. The cleaner does not attack the skins' adhesive. Application: Moisten Care Fleece with Skin Cleaner. Gently clean the skins in the direction of travel.

Unique special cleaner for nano powder and other racing products. Product advantages Holmenkol Racing Base Cleaner 500ml: Selectively dissolves fluorine materials and does not attack the kerosene base After treatment, the ski absorbs more wax again

Meets all regulations of the international ski associations and is perfectly suited for the gentle removal of HOLMENKOL FF products. After the treatment, the ski absorbs more wax again and the ski regains its basic speed.

Special klister for fine-grained old snow, wet and dirty snow For air temperatures from +3° to 1°C Incl. klister spatula

The Holmenkol World Cup Finish Powder Red+ is the top layer in the race base. Fluorine-free, highly abrasion-resistant, and designed specifically for the area where many races are decided. Holmenkol World Cup Finish Powder Red+ - Finish for -1 to -6 degrees Fluorine-free high-performance finishing powder For fine to coarse snow as well as wet snow Snow temperatures ranging from -1 to -6 degrees Increases speed and acceleration Very high abrasion resistance, even over longer distances High dirt repellency Ironing temperature: 150 to 160 degrees 30 g can Red+ or Red The advantage lies in the temperature range: Red+ works from -1 to -6 degrees, while the standard Red works from -4 to -12 degrees. For snow just below freezing—as is typical in spring races or on artificial snow—go with the Red+. Yellow covers 0 to -4 degrees, and Blue covers -10 to -20 degrees. Here’s how to use it Sprinkle a thin layer onto the already waxed and brushed base, iron it on quickly at 150 to 160 degrees, let it cool, and brush it out with a horsehair and nylon brush. Use sparingly: 30 g is enough for many pairs. Frequently Asked Questions Does the powder replace the base wax?No. It is the final layer applied over a suitable glide wax—not a substitute for it. What kind of wax iron do I need?A digitally controlled iron with a thick plate. The temperature must remain stable between 150 and 160 degrees. Is it fluorine-free?Yes, completely fluorine-free and compliant with competition rules.

The Holmenkol Racing Black Bar Red is the all-rounder of the series. It covers the temperature range in which most races take place and features the improved, next-generation carbon matrix. Holmenkol Racing Black Bar Red—the mid-range option An enhanced version of the well-known FF World Cup Bars with a specially adapted carbon modification Measurably better speed and glide performance than its predecessor Tested by the World Cup team Improved mechanical properties and greater wear resistance Maximum water and dirt repellency Very high acceleration, top marks for glide performance and abrasion resistance Ironing temperature: 115 to 125 degrees Fluorine-free, 150 g bar When do you use Red Red is designed for snow temperatures ranging from -4 to -10 degrees and works well on fine to coarse as well as wet snow. If it gets warmer, Yellow (0 to -4 degrees) is the better choice; for really cold snow, Blue (-8 to -15 degrees) is recommended. If you only want to carry one bar in your case, go with Red. Here’s how to use it Clean the base, apply the wax by ironing at 115 to 125 degrees, let it cool, peel it off, and brush it out with a nylon and horsehair brush. Depending on the application thickness, a 150-g bar is enough for about 15 to 25 pairs of alpine skis. Frequently Asked Questions Is the wax fluorocarbon-free?Yes, the entire Racing Black Bar series is fluorine-free and complies with the regulations of international skiing federations. What’s the difference between these and the FF World Cup Bars?The matrix has been further developed with a specially adapted carbon modification for more speed and greater abrasion resistance. Is one bar enough for a season?Easily enough for one to two pairs of skis. For race teams, the wax is also available in a backshop format.

The Holmenkol World Cup Finish Speed Block Red is the finish for the start area. No waxing stand, no iron, no waiting: apply it, buff it in, give it a quick brush, and you’re off. That’s exactly what makes it so practical for everyday racing. Holmenkol World Cup Finish Speed Block Red—Speed without a waxing stand High-performance special polymer wax formula Powder technology developed for the World Cup, based on special waxes and polymers Extreme acceleration and top speed Very long-lasting with excellent coverage Highly abrasion-resistant due to the hardness of the materials For fresh snow or damp old and artificial snow Snow temperatures from -6 to -12 degrees 10 g cube in the box Where it really shines In the starting area, when conditions are different than expected just before the race. Apply, rub in with the cork, brush out briefly—it takes two minutes and requires no tools other than a cork and a brush. For basic preparation at home, iron-on wax remains the foundation. Which color is best? Red covers -6 to -12 degrees, Blue covers the cold range from -12 to -20 degrees. Measure the snow temperature, not the air temperature. Frequently Asked Questions Do I have to iron on the block?No, that’s exactly the point. Apply, seal, brush. How long does one application last?For the duration of a race. For a full day of training, an ironed-on finish is the better choice. Is 10 g enough?Yes, the product goes a long way. One cube is enough for many applications.

The Holmenkol Racing Black Bar Yellow is the next evolution of the well-known FF World Cup Bars. The specially adapted carbon formulation makes a difference where it counts: more base speed, better glide, and a wax that lasts the entire race. Holmenkol Racing Black Bar Yellow—for warm conditions An enhanced version of the well-known FF World Cup Bars with a specially adapted carbon modification Measurably better speed and glide performance than its predecessor Tested by the World Cup team Improved mechanical properties and greater wear resistance Maximum water and dirt repellency Very high acceleration, top marks for glide performance and abrasion resistance Ironing temperature: 115 to 125 degrees Fluorine-free, 150 g bar When do you use Yellow Yellow covers snow temperatures from 0 to -4 degrees, meaning fine to coarse-grained as well as wet snow. If it gets colder, go with Red (-4 to -10 degrees) or Blue (-8 to -15 degrees). In borderline conditions, the snow is the deciding factor, not the air temperature: Always measure in the snow, not in the sun. Here’s how to use it Clean the base, apply the wax by ironing at 115 to 125 degrees, let it cool, peel it off, and brush it out with a nylon and horsehair brush. Depending on the application thickness, a 150-g bar is enough for about 15 to 25 pairs of alpine skis. Frequently Asked Questions Is the wax fluorocarbon-free?Yes, the entire Racing Black Bar series is fluorine-free and complies with the regulations of international skiing federations. Do I need to apply a top finish on top of it?Not necessarily. However, when used in combination with a World Cup Finish Powder or Speed Block, you’ll get even better results. How should I store the wax?In a cool, dry, and dark place. That way, it will remain ready for use for years.