Knives
Mach Tac 1 – Machete
The Walther Mach Tac 1 is no ordinary machete. With its 400 mm blade made of hardened 440A stainless steel and its distinctive recurve shape, it makes it clear at first glance what it was built for: real-world use in the field. Whether for bushcraft, survival, or tough gardening tasks—this tool makes short work of them. Walther Mach Tac 1 – A machete with bite and control The blade impresses across the board. The 440A steel is not only hard enough for sustained cutting work but can also be easily resharpened without special tools. The black anti-glare coating protects against corrosion and prevents distracting reflections during use. With a blade thickness of 4.5 mm, the Mach Tac 1 easily handles even tougher tasks. The ripper hook on the back of the blade is a clever detail: cutting through ropes, removing branches, trimming cords—no problem at all. The false edge at the front is not sharpened, which improves control while working. Handle and Balance The polymer handle with TPR inserts (thermoplastic rubber) provides a secure grip even when wet. Thanks to the combination of a lightweight handle and a solid steel blade, the balance point is located approximately in the front third of the blade—this ensures cutting power without losing control. Total weight: approx. 750 g. Total length: 550 mm. The Mach Tac 1 comes with a sturdy nylon sheath with belt loops, so it can be carried on your person and is always within reach. What is the blade length of the Walther Mach Tac 1? The blade is 400 mm long. The total length of the machete is 550 mm, with a blade thickness of 4.5 mm. What type of steel is the blade made of? The Mach Tac 1 is made of hardened 440A stainless steel with a black anti-glare coating. The steel is rust-resistant and can be easily resharpened without special equipment. What is the Mach Tac 1 suitable for? For bushcraft, survival, camping, and gardening. The prying hook on the back of the blade makes it particularly useful for cutting through ropes or cords. Thanks to its robust construction, it is also suitable for tougher forestry work. What is included in the package? The Walther Mach Tac 1 comes with a nylon sheath featuring belt loops. Am I allowed to carry the Mach Tac 1 in Switzerland? In Switzerland, there is a restricted ban on carrying machetes with a blade length exceeding 12 cm in public. Transporting them in a vehicle or using them for work, hunting, or similar activities is generally permitted. Please check the cantonal regulations and refer to the “Legal Information” section on walther-shop.ch.
Classic Clip 1 – folding knife 440C
A folding knife with character: The Walther Classic Clip 1 combines classic craftsmanship with solid functionality. The walnut handle scales and polished stainless steel bolsters give it a timeless appearance – the knife looks good without sacrificing performance. Whether for hunting, outdoor use, or simply as a reliable everyday knife in your pocket: It cuts a fine figure in every situation. Walther Classic Clip 1 – Folding knife with 440C blade and backlock The satin-finished clippoint blade made of 440C steel is ideal for precise cutting tasks with its 98 mm length. 440C is considered one of the best stainless steels in this segment: good hardness, solid edge retention, and easy to resharpen. The blade thickness of 2.8 mm gives the knife enough backbone for outdoor use without becoming unnecessarily heavy. The locking mechanism works via a backlock system – reliable, proven, and easy to use. The blade locks cleanly into place and can be opened safely with one hand. Overall length 227 mm, weight 165 g. Compact enough for your pocket, large enough for real tasks. Delivered with leather belt holster A leather belt holster is included – it matches the knife’s classic look and keeps it ready to hand on your belt. Ideal for hunting or your next outing. What blade steel does the Classic Clip 1 use? The blade is made of 440C stainless steel – one of the hardest stainless steels in knife making. It offers good edge retention and is easy to resharpen. How does the locking mechanism work? The Classic Clip 1 uses a backlock system. The blade is locked at the back of the handle – this is one of the most stable and reliable locking mechanisms for folding knives. What is a clippoint blade? A clippoint blade has a straight spine that slopes concavely shortly before the tip – as if “clipped”. This creates a fine, pointed blade that is well suited for precise work and is especially popular for hunting. What is included in the scope of delivery? The Walther Classic Clip 1 is supplied including a leather belt holster.
Elite Force EF102
The Elite Force EF102 is a rescue knife built for emergencies. Glass breaker, belt cutter, liner lock – everything you need in an emergency situation. And at a price that leaves no room for excuses. Elite Force EF102 – Rescue knife with glass breaker and belt cutter The 83 mm long spearpoint blade made of 420 steel can be opened with one hand and locks securely via liner lock. The integrated glass breaker sits at the end of the handle, and the belt cutter is built into the handle – both within easy reach, without extra tools. The G10 plastic handle scales provide a secure grip, even when hands are wet or dirty. With a total length of 210 mm and a weight of 191 g, the knife sits solidly in the hand. Always with you thanks to the belt clip The included belt clip ensures that the EF102 is always within reach – whether in the vehicle, while camping, or on the go. If you’re looking for a reliable rescue knife that does its job without much fuss, the EF102 is a great choice. FAQ – Elite Force EF102 What is a rescue knife and what do I need it for? A rescue knife is designed for emergency situations. The EF102 features a glass breaker to free trapped individuals from a vehicle and a belt cutter to quickly cut through seat belts or ropes. What type of steel is the blade made of? The blade is made of 420 stainless steel – rust-resistant and suitable for rugged everyday use. How does the belt cutter on the EF102 work? The belt cutter is integrated into the rear part of the handle. Guide the belt into the slot and cut through it with one pull – easy to use even under stress. Is the EF102 suitable for daily use? Yes. Thanks to the belt clip, compact design, and robust materials, it is suitable as an everyday companion in the vehicle, for outdoor use, or as a safety knife.
Walther AFW – Folding knife
Some knives are simply tools. The Walther AFW is both – a tool and an object. The matte walnut handle, the spearpoint blade with satin finish, the included leather holster: The Adventure Folder Wood makes a strong visual impression without sacrificing functionality. Walther AFW Adventure Folder Wood – Folding knife with walnut handle The 102 mm long spearpoint blade made of AUS-8 steel is robust, holds an edge better than simple 420 steels, and can be sharpened well. The backlock reliably locks the blade and can be released safely and in a controlled manner. The walnut handle sits securely in the hand thanks to its ergonomic shape and precise finger grooves – even during longer use. With an overall length of 240 mm and a weight of 203 g, the AFW has a solid size that you can feel. Includes leather holster for the belt The included leather holster features Walther branding and matches the style of the knife. This means you always have the AFW securely with you on your belt – whether camping, hunting, or simply on the go. A knife you take out because it looks good, and leave in because it does its job. FAQ – Walther AFW What does AUS-8 steel mean? AUS-8 is a Japanese stainless steel with good edge retention, solid toughness, and easy resharpening. It is qualitatively above simple 420 steels and is a popular material in the mid-price segment. What is a backlock? With a backlock, the lock is located on the back of the handle. The blade locks into place when opened and is released again by pressing on the back – a proven solution that can be operated with one hand. What is included in the scope of delivery? The AFW comes complete with a leather holster that can be attached to a belt. Who is the Walther AFW suitable for? For anyone looking for a high-quality folding knife that impresses both in outdoor use and in everyday life – without looking like a typical tactical knife.
Available, delivery time: 1-3 days
OSK II Folding Knife
Anyone who really works outdoors needs a knife that can keep up. The Walther OSK II – Outdoor Survival Knife – was designed specifically for use in the great outdoors. No frills, no unnecessary design. Just what you need in the woods, at camp, or on the trail. Walther OSK II – Outdoor Survival Knife for real-world use The 105 mm long blade, made of black-coated 440A steel, has a unique contour: The cutting edge features a roughly 5 cm long groove that allows you—with your other hand on the tip—to peel bark off branches, cut through ropes, or perform similar tasks. The blade locks securely in the open position via a liner lock. When open, the OSK II measures 240 mm and weighs 240 g—a knife you can really feel in your hand. Handle scales with grip even when wet The polymer handle scales with non-slip rubber inserts provide a secure grip even with wet or dirty hands. At the end of the handle is a solid strap loop that allows you to secure the knife further. Flexible belt carry The included nylon sheath with a snap fastener can be attached horizontally to a belt using two cross loops or vertically using a single loop—depending on the situation and personal preference. FAQ – Walther OSK II What does OSK stand for? OSK stands for Outdoor Survival Knife. The OSK II is the more compact version of the OSK series from Walther, designed for practical work in the great outdoors. What is the special groove on the blade? The approximately 5 cm long groove on the cutting edge allows for two-handed control—for example, for peeling bark, carving, or other controlled cuts that require precision. How is the knife carried? The OSK II ships in the included nylon sheath with a snap fastener. This can be attached to a belt horizontally or vertically. What material is the blade made of? The blade is made of 440A stainless steel with a black protective coating—rust-resistant and durable for outdoor use.
Available, delivery time: 1-3 days
P99 – Folding Knife
The Walther P99 Knife is more than a utility knife – it is a direct reference to one of the most well-known Walther pistols. Anyone who knows the P99 will recognize the knife immediately: same lines, same character, same signature style. Walther P99 Knife – Folding knife in the design of the P99 pistol The 94 mm Spearpoint blade made of 440-Stainless-Steel is black coated and stands out with its hefty construction and recurve spine. The serration on the blade spine continues onto the handle and gives the thumb a secure grip – thoughtfully designed and consistently executed. The flipper serves both as an opening aid and as a finger guard element. The linerlock reliably locks the blade in the open position. Interchangeable backstrap – suitable for every hand size Just like on the P99 pistol, the backstrap of the knife can be changed. Three different sizes are included in the scope of delivery, so you can adapt the knife exactly to your hand – a detail that is rarely found in this price range. The handle material made of polymer and TPR ensures a secure grip, even during prolonged use. FAQ – Walther P99 Knife What does the P99 Knife have to do with the P99 pistol? The knife adopts design elements of the legendary Walther P99 pistol – including the serration, the design language and above all the interchangeable backstrap, which is also supplied with the knife in three sizes. How do you open the P99 Knife? The blade can be opened via flipper. This also serves as a finger guard element and offers additional protection when cutting. Is the backstrap system really practical? Yes. Anyone who works with gloves or simply prefers a different grip size can change the back quickly and easily. All three sizes (S, M, L) are included in the scope of delivery. What steel is the blade made of? The blade is made of 440-Stainless-Steel with a black coating – robust, rust-resistant and well suited for everyday use.
Available, delivery time: 1-3 days
MachTac 2 – Machete
If you’re looking for a machete that makes no compromises, the Walther MachTac 2 is the right choice. The 380 mm blade made of 440 steel with an anti-glare coating isn’t meant for the desk – it’s designed for use in the field, in the bush, or on the trail. Walther MachTac 2 – Machete with a 380-mm blade made of 440 steel The blade has a black coating, is weather-resistant, and, thanks to 440A steel, is easy to resharpen – even without special tools. With a total length of 530 mm and a weight of 609 g, the MachTac 2 is the right size for powerful chopping and precise cutting. The blade shape is reminiscent of the Nepalese kukri profile: wider at the front, with the weight in the right position for an efficient strike. Polymer and TPR handle – secure even when wet The handle, made of non-slip polymer with TPR (thermoplastic rubber) inserts, sits securely in your hand even when wet or while wearing gloves. No slipping, no re-gripping – the MachTac 2 fits in your hand exactly as you’d expect from a tool of this size. Includes nylon pouch with belt loops The MachTac 2 comes with a sturdy nylon pouch that can be attached via belt loops – horizontally or vertically, depending on your needs. This way, you always have the machete within reach without it getting in the way. FAQ – Walther MachTac 2 What is the MachTac 2 suitable for? The MachTac 2 is a utility machete for bushcraft, camping, survival, and any situation where a knife just won’t cut it – chopping branches, clearing paths, breaking up rough material. What kind of steel is the blade made of? The blade is made of 440A stainless steel with a black protective coating. The steel is rust-resistant, holds its edge better than basic steels, and is easy to resharpen. What is the difference between MachTac 1 and MachTac 2? Both models are one-handed machetes with a similar design. With a blade length of 380 mm and a total length of 530 mm, the MachTac 2 has a more compact design than the MachTac 1 – ideal if you prefer a more manageable tool. Can the MachTac 2 be sharpened? Yes. The 440A steel can be easily resharpened with a sharpening rod or whetstone – even without professional equipment.
Available, delivery time: 1-3 days
Mini Axe
An axe that fits in your jacket pocket – that sounds like a compromise, but with the Walther Mini Axe, it isn’t one. With an overall length of 228 mm and a weight of 280 g, it is genuinely compact, yet performs in use like a real axe. Splitting wood, cutting branches, carving – the Mini Axe does all of it without complaint. Walther Mini Axe – compact one-handed axe made of 440C steel The axe head and poll are made of 5.7 mm thick 440C stainless steel with a black protective coating – this is not the usual sheet-metal thickness that bends quickly on cheap axes. The 70 mm cutting edge is suitable for precise carving just as much as for powerful blows. The weight is distributed with a pleasant head-heaviness, which makes the strike more efficient and puts less strain on the hand. Handle with secure grip The ergonomic handle made of textured polymer sits securely and non-slip in the hand – even in wet conditions or with gloves. A safety cord or a lanyard can be attached to the lanyard hole on the pommel so that the axe is not lost during use. Includes holster for the belt The Walther Mini Axe comes with a holster that can be attached to the belt. This way you always have it ready to hand without it having to disappear into your backpack. FAQ – Walther Mini Axe What is the Walther Mini Axe suitable for? It is suitable for bushcraft, camping and survival – for chopping wood, working on branches, carving or as a compact tool outdoors. Thanks to its size, it also fits well into everyday life or the garden. What steel is the axe head made of? The axe head is made of 440C stainless steel with a black protective coating. 440C is the hardest of the 440 steels – it holds an edge well and is robust for heavy use. How heavy is the Mini Axe? It weighs 280 g and measures 228 mm – this is deliberately designed to be head-heavy so that the strike develops more force without much effort. What is included with the holster? The included holster protects the axe head and can be attached to the belt – so the Mini Axe is always with you and safely stored.
Available, delivery time: 1-3 days
