Alphamix Yellow

The Holmenkol Racing Black Bar Yellow is the next evolution of the well-known FF World Cup Bars. The specially adapted carbon formulation makes a difference where it counts: more base speed, better glide, and a wax that lasts the entire race. Holmenkol Racing Black Bar Yellow—for warm conditions An enhanced version of the well-known FF World Cup Bars with a specially adapted carbon modification Measurably better speed and glide performance than its predecessor Tested by the World Cup team Improved mechanical properties and greater wear resistance Maximum water and dirt repellency Very high acceleration, top marks for glide performance and abrasion resistance Ironing temperature: 115 to 125 degrees Fluorine-free, 150 g bar When do you use Yellow Yellow covers snow temperatures from 0 to -4 degrees, meaning fine to coarse-grained as well as wet snow. If it gets colder, go with Red (-4 to -10 degrees) or Blue (-8 to -15 degrees). In borderline conditions, the snow is the deciding factor, not the air temperature: Always measure in the snow, not in the sun. Here’s how to use it Clean the base, apply the wax by ironing at 115 to 125 degrees, let it cool, peel it off, and brush it out with a nylon and horsehair brush. Depending on the application thickness, a 150-g bar is enough for about 15 to 25 pairs of alpine skis. Frequently Asked Questions Is the wax fluorocarbon-free?Yes, the entire Racing Black Bar series is fluorine-free and complies with the regulations of international skiing federations. Do I need to apply a top finish on top of it?Not necessarily. However, when used in combination with a World Cup Finish Powder or Speed Block, you’ll get even better results. How should I store the wax?In a cool, dry, and dark place. That way, it will remain ready for use for years.

The Holmenkol Racing Black Bar Red is the all-rounder of the series. It covers the temperature range in which most races take place and features the improved, next-generation carbon matrix. Holmenkol Racing Black Bar Red—the mid-range option An enhanced version of the well-known FF World Cup Bars with a specially adapted carbon modification Measurably better speed and glide performance than its predecessor Tested by the World Cup team Improved mechanical properties and greater wear resistance Maximum water and dirt repellency Very high acceleration, top marks for glide performance and abrasion resistance Ironing temperature: 115 to 125 degrees Fluorine-free, 150 g bar When do you use Red Red is designed for snow temperatures ranging from -4 to -10 degrees and works well on fine to coarse as well as wet snow. If it gets warmer, Yellow (0 to -4 degrees) is the better choice; for really cold snow, Blue (-8 to -15 degrees) is recommended. If you only want to carry one bar in your case, go with Red. Here’s how to use it Clean the base, apply the wax by ironing at 115 to 125 degrees, let it cool, peel it off, and brush it out with a nylon and horsehair brush. Depending on the application thickness, a 150-g bar is enough for about 15 to 25 pairs of alpine skis. Frequently Asked Questions Is the wax fluorocarbon-free?Yes, the entire Racing Black Bar series is fluorine-free and complies with the regulations of international skiing federations. What’s the difference between these and the FF World Cup Bars?The matrix has been further developed with a specially adapted carbon modification for more speed and greater abrasion resistance. Is one bar enough for a season?Easily enough for one to two pairs of skis. For race teams, the wax is also available in a backshop format.

Impresses with its extreme abrasion resistance and wide range of applications. Excellently suited as transport wax. Ironing temperature 125~135 °C. Product advantages Holmenkol Betamix Red: BETAMIX World Cup Skiwax RED Highest quality 12 base and training wax based on hydrocarbon For all types of snow For snow temperatures from -4° to -14° C 150 gr

The HOT WAX ADDITIVE | Extra Wet Snow from FZERO was specially developed to improve the gliding properties in very wet snow conditions optimized. By adding it to the Competition wax line, it ensures maximum performance on wet and water-saturated snow. Area of application: For very wet snow conditions with temperatures from 0°C to -6°C Suitable for Alpine skiing, freestyle skiing, snowboarding & Nordic skiing 100% fluorine-free - Environmentally friendly and powerful Application: Before waxing, clean the base with Base Cleaner clean. Hot wax with waxing iron at 120 - 140°C iron on. For at least 2 hours at room temperature to recrystallize. Remove excess wax with a plexiglass blade. Remove with steel or brush, then polish with a nylon brush. Optimization tips: The Hot Wax Additive can be combined with any base wax to cope with extreme conditions. For short-term adjustments to changing conditions, a Paste Wax can be used. For maximum performance, apply the last layer with a Fine Tuning Powder, Block or Spray seal. Product details: Base: Racing wax mixture with glide additives Content: 100g Color: Yellow poured in block Maximize the glide of your skis with the HOT WAX ADDITIVE | Extra Wet from FZERO!

The PASTE WAX | Warm from FZERO is a special racing wax mixture for wet snow conditions. The paste improves gliding properties and ensures maximum performance - ideal for training and racing. Area of application: For wet snow conditions with temperatures from -0°C to -6°C Suitable for Alpine skiing, freestyle skiing, snowboarding & Nordic skiing 100% fluorine-free - Environmentally friendly and powerful Application: Before use, clean the base with Base Cleaner clean. Apply the paste very thinly and homogeneously with fleece or pad onto the floor covering. Leave on for at least 30 minutes allow to dry. Subsequently thoroughly with a polish with a nylon brush. Optimization tips: The advantage of Paste Wax over hot wax is the quick and easy application - ideal for short-term preparation before a race or training session. Particularly popular for technical disciplines in alpine racing. For maximum performance, apply the last layer with a Fine Tuning Block or Spray seal. Product details: Base: Racing wax mixture with glide additives Contents: 100ml Color: Yellow Prepare your skis quickly and efficiently for wet conditions - with the PASTE WAX | Warm from FZERO!

The FINE TUNING BLOCK | Warm from FZERO is a rub-on Booster for the last layer of race preparation. It optimizes the gliding properties especially for wet snow conditions and ensures a perfect finish before the race. Area of application: For medium snow conditions with temperatures from 0°C to -6°C Suitable for Alpine skiing, freestyle skiing, snowboarding & Nordic skiing 100% fluorine-free - Environmentally friendly and powerful Application: Before use, clean the base with Base Cleaner before use. Apply the Fine Tuning Block very finely and homogeneously onto the ski base. Apply with cork, pad or massage in well. Then rub in with a nylon or polish with a nylon or horsehair brush. Optimization tips: Before use, apply the appropriate Paste Wax or hot wax for the conditions. In extreme snow conditions, the base wax can be mixed with hot wax additives can be optimized. The Fine Tuning Block is used in particular on old, dry to damp artificial snow as the final as the final layer. Product details: Basis: Future glide additive with color poured into block Content: 25g Achieve the perfect glide for your race with the FINE TUNING BLOCK | Warm from FZERO!

The HOT WAX | Warm from FZERO is a special wax mixture for the training of all snow sports equipment in wet conditions. It not only improves the gliding properties, but also protects the base from oxidation and drying out. Area of application: For wet snow conditions with temperatures from -2°C to -12°C Suitable for Alpine skiing, freestyle skiing, snowboarding & Nordic skiing 100% fluorine-free - Sustainable and powerful Application: Clean base with Base Cleaner before use. Heat wax with waxing iron at 120 - 140°C iron on. For at least 2 hours at room temperature to recrystallize. Remove excess wax with a plexiglass blade. Brush out with a steel or copper brush, then polish with a nylon brush. Optimization tips: The right training wax depending on the conditions. Ideal for quick preparation of new material during training. In extreme temperatures, the base wax can be mixed with hot wax additives can be optimized. Product details: Base: Wax mixture with glide additives Available in: 200g Prepare your skis or snowboard optimally for training - with the HOT WAX | Medium from FZERO!

Performance hot wax with DLC additive for racing and training in all disciplines. Used as a base wax or added to racing wax for dirty snow and aggressive artificial snow. Features: Temperature range snow: 0 to -30°C Content: 40g For use as a base wax or mixed in as an additive Good gliding properties DLC additive for maximum dirt repellency and durability Adhesion promoter for top finish products Resealable wax case

The Holmenkol Ski Tour Wax Stick is a practical universal wax for touring skins and ski bases. The compact wax stick can be rubbed on directly and quickly ensures better gliding properties on ski tours – whether on the ascent or descent. The wax cares for touring skins particularly gently and at the same time improves the gliding properties of the ski base. This reduces the formation of clods and keeps the material performing for longer. Application is quick and easy, ideal for on the go during the tour. Holmenkol Ski Tour Wax Stick – Advantages Universal wax for touring skins and ski bases Improves gliding properties on the ascent and descent Gentle care for all types of touring skins Reduces clod formation in wet snow Quick and easy application by rubbing on Suitable for all types of snow and temperatures Environmentally friendly paper packaging Application Rub wax directly onto touring skin or ski base Rub in or spread lightly as required Ideal for quick application on the go Technical data ProductHolmenkol Ski Tour Wax Stick Contents50 g Area of applicationSki touring, touring skins, ski base Temperature rangeFor all types of snow and temperatures ApplicationRubbing onto skin or base PackagingEcological paper packaging FAQ about the Holmenkol Ski Tour Wax Stick What is the Ski Tour Wax Stick used for? The stick is applied to touring skins or ski bases to improve gliding properties and reduce clod formation. Can I use the wax at all temperatures? Yes, the Ski Tour Wax Stick is a universal wax and is suitable for all types of snow and temperature ranges. Is the wax also suitable for on the go? Yes, thanks to the compact stick shape, the wax can be applied quickly and easily directly on the tour.

The Holmenkol Natural Skiwax Stick is a biodegradable ski wax stick for quick waxing on the go. Simply rub on, polish with the integrated felt, and start immediately with improved gliding properties. Holmenkol Natural Skiwax Stick – biological ski wax for on the go When the base becomes dull, you need a quick solution. With this practical wax stick, you can improve the glide of your skis or snowboard in just a few seconds. The wax is applied directly to the base and then polished with the integrated felt. The biological formula cares for the base and ensures reliable performance in all types of snow and temperatures. Product details Biodegradable ski wax Quick application without tools Rub on wax and polish with felt Improves gliding properties Cares for the base Suitable for all types of snow and temperatures Innovative cardboard packaging Content: 50 g Area of application Alpine skis Snowboard All Discipline Quick service on the go FAQ How is the Natural Skiwax Stick used? You rub the wax directly onto the base and then polish it with the integrated felt. What temperatures is the wax suitable for? The wax works in all types of snow and temperatures. Does the wax need to be ironed in? No, the stick is designed for quick rubbing and polishing without an iron. Is the wax environmentally friendly? Yes, the Natural Skiwax Stick is biodegradable and comes in sustainable packaging.