Holmenkol Performance Bar 21 150 g

The Holmenkol Racing Black Bar Red is the all-rounder of the series. It covers the temperature range in which most races take place and features the improved, next-generation carbon matrix. Holmenkol Racing Black Bar Red—the mid-range option An enhanced version of the well-known FF World Cup Bars with a specially adapted carbon modification Measurably better speed and glide performance than its predecessor Tested by the World Cup team Improved mechanical properties and greater wear resistance Maximum water and dirt repellency Very high acceleration, top marks for glide performance and abrasion resistance Ironing temperature: 115 to 125 degrees Fluorine-free, 150 g bar When do you use Red Red is designed for snow temperatures ranging from -4 to -10 degrees and works well on fine to coarse as well as wet snow. If it gets warmer, Yellow (0 to -4 degrees) is the better choice; for really cold snow, Blue (-8 to -15 degrees) is recommended. If you only want to carry one bar in your case, go with Red. Here’s how to use it Clean the base, apply the wax by ironing at 115 to 125 degrees, let it cool, peel it off, and brush it out with a nylon and horsehair brush. Depending on the application thickness, a 150-g bar is enough for about 15 to 25 pairs of alpine skis. Frequently Asked Questions Is the wax fluorocarbon-free?Yes, the entire Racing Black Bar series is fluorine-free and complies with the regulations of international skiing federations. What’s the difference between these and the FF World Cup Bars?The matrix has been further developed with a specially adapted carbon modification for more speed and greater abrasion resistance. Is one bar enough for a season?Easily enough for one to two pairs of skis. For race teams, the wax is also available in a backshop format.

Holmenkol ’s Performance Bar Purple is the hot wax for racers and ambitious skiers who want a base and training wax with a wide range of applications: from 0 to minus 12 degrees Celsius snow temperature, for skis and snowboards, 100 percent PFC-free. 150 g block, made in Germany. Holmenkol Performance Bar Purple: base and training wax for temperatures from 0 to minus 12 degrees This wax covers the range of conditions typical for most days of skiing in the Alps. The formula is designed for extremely high abrasion resistance; the wax lasts a long time on the base and picks up very little dirt. As a base wax, it prepares the base for racing waxes; as a training wax, it lasts the entire season. Ironing temperature: 130 to 140 degrees, for new, old, and coarse snow in moderate to dry humidity. Features in Detail √ Snow temperature 0 to minus 12 degrees √ Base and training wax for alpine skiing, cross-country skiing, and snowboarding √ Extremely high abrasion resistance, minimal dirt absorption, long-lasting adhesion √ 100 percent PFC-free, FIS-compliant √ Ironing temperature: 130 to 140 degrees √ 150 g block, Made in Germany Intended Use Competition and training in all disciplines, ambitious recreational skiers, ski service shops, and workshops as a universal wax for the winter. Application Clean and brush the base, apply the wax with an iron set to 130 to 140 degrees and iron it on in one smooth stroke, let it cool, scrape it off with the plexiglass scraper, and brush it out with a nylon or horsehair brush. What temperatures is Purple designed for? For snow temperatures ranging from 0 to minus 12 degrees—that is, for most of the season. For wet snow above 0 degrees, use a yellow wax; for very cold snow, use a blue one. Is the wax PFC-free? Yes, 100 percent PFC-free and therefore also approved for FIS races. Can I use it as a base wax under racing waxes? Yes, that’s exactly what it’s designed for: first iron on Performance Bar Purple, scrape it off, then apply the race wax. For skis and snowboards? Yes, for all types of bases: alpine skis, cross-country skis, and snowboards. How many applications does 150 g cover? Depending on ski length, about 8 to 12 pairs of skis.

Impresses with its extreme abrasion resistance and wide range of applications. Excellently suited as transport wax. Ironing temperature 125~135 °C. Product advantages Holmenkol Betamix Red: BETAMIX World Cup Skiwax RED Highest quality 12 base and training wax based on hydrocarbon For all types of snow For snow temperatures from -4° to -14° C 150 gr

Impresses with its extreme abrasion resistance. Ironing temperature 115~125 °C. Product advantages Holmenkol Alphamix Yellow: Highest quality base, base and training wax based on hydrocarbon 150 gr For soft, new and fine-grained snow For snow temperatures from 0° to -4°C

The Holmenkol Racing Black Bar Yellow is the next evolution of the well-known FF World Cup Bars. The specially adapted carbon formulation makes a difference where it counts: more base speed, better glide, and a wax that lasts the entire race. Holmenkol Racing Black Bar Yellow—for warm conditions An enhanced version of the well-known FF World Cup Bars with a specially adapted carbon modification Measurably better speed and glide performance than its predecessor Tested by the World Cup team Improved mechanical properties and greater wear resistance Maximum water and dirt repellency Very high acceleration, top marks for glide performance and abrasion resistance Ironing temperature: 115 to 125 degrees Fluorine-free, 150 g bar When do you use Yellow Yellow covers snow temperatures from 0 to -4 degrees, meaning fine to coarse-grained as well as wet snow. If it gets colder, go with Red (-4 to -10 degrees) or Blue (-8 to -15 degrees). In borderline conditions, the snow is the deciding factor, not the air temperature: Always measure in the snow, not in the sun. Here’s how to use it Clean the base, apply the wax by ironing at 115 to 125 degrees, let it cool, peel it off, and brush it out with a nylon and horsehair brush. Depending on the application thickness, a 150-g bar is enough for about 15 to 25 pairs of alpine skis. Frequently Asked Questions Is the wax fluorocarbon-free?Yes, the entire Racing Black Bar series is fluorine-free and complies with the regulations of international skiing federations. Do I need to apply a top finish on top of it?Not necessarily. However, when used in combination with a World Cup Finish Powder or Speed Block, you’ll get even better results. How should I store the wax?In a cool, dry, and dark place. That way, it will remain ready for use for years.

Practical set of 2 with one bar each of Alphamix YELLOW and Betamix RED. Ironing temperature 115~145 °C. Product advantages Holmenkol Worldcup Mix Hot Yellow-Red: Highest quality base and training wax based on hydrocarbon For all types of snow For snow temperatures from 0° to -14°C 2x35 gr

The Holmenkol World Cup Finish Speed Block Blue is the finish for the starting area in cold snow: no waxing stand, no iron, no waiting. Apply, buff, brush briefly, and go. For snow temperatures ranging from minus 12 to minus 20 degrees, 10 g of wax cubes in the box, PFC-free. Holmenkol Speed Block Blue: Speed without a waxing stand at temperatures ranging from minus 12 to minus 20 degrees The high-performance specialty polymer wax formula is based on powder waxes developed for the World Cup. Thanks to its high hardness, the block is very abrasion-resistant and economical—one cube lasts for many applications. Designed for dry or granular snow, especially when conditions are different than expected right before the race: two minutes with a cork and brush, and the ski picks up speed. Features in Detail √ High-performance specialty polymer wax, based on World Cup powders √ Extreme acceleration and very high speed √ Very long-lasting, highly abrasion-resistant, goes a long way √ For dry or granular snow √ Snow temperature: minus 12 to minus 20 degrees √ 100 percent PFC-free, 10 g cube in the box Intended Use Use in the starting area during races, training, and ski service as a quick finishing step over the ironed-on wax. For alpine skiing, cross-country skiing, and snowboarding. Application Rub the block onto the cleanly brushed-out base, work it in with the cork, and brush it out with the nylon brush. For basic preparation at home, iron-on wax remains the foundation. Do I have to iron on the block? No, that’s exactly the point: apply, buff, brush. Which color works best for which type of snow? Blue covers temperatures from minus 12 to minus 20 degrees, Red from minus 6 to minus 12 degrees. Measure the snow temperature, not the air temperature. How long does one application last? For a single race run. For a full day of training, an ironed-on finish is the better choice. Is 10 g enough? Yes, the material goes a long way—one cube lasts for many runs. Is the block FIS-compliant? Yes, it is fluorine- and PFC-free.

The Zero HOT WAX | COLD from FZERO is a special racing wax mixture for cold conditions. Hot waxing significantly improves the gliding properties - ideal for ambitious winter sports enthusiasts. Area of application: For cold snow conditions with temperatures from -6°C to -20°C Suitable for Alpine skiing, freestyle skiing, snowboarding & Nordic skiing 100% fluorine-free - Environmentally friendly and powerful Application: Before waxing, clean the base with Base Cleaner clean. Hot wax with waxing iron at 140 - 160°C iron on. For at least 2 hours at room temperature to recrystallize. Remove excess wax with a plexiglass blade. Remove with steel or Brush out with a steel or copper brush, then nylon brush polish. Optimization tips: At extreme temperatures (very cold, warm or dry), the first hot wax layer can be treated with hot wax additives can be adapted. In the event of short-term weather changes, a Paste Wax to rewax quickly and easily. For maximum performance, apply the last layer with a Fine Tuning Powder, Block or Spray seal. Product details FZERO Zero HOT WAX | COLD 100g - Special racing wax for cold conditions Basis: Racing wax blend with glide additives Content: 100g Color: poured in block Optimize your ski performance with the HOT WAX | COLD from FZERO!

The Zero HOT WAX | COLD from FZERO is a special racing wax blend for medium conditions. Hot waxing significantly improves the gliding characteristics – ideal for ambitious winter sports enthusiasts. Area of application: For medium snow conditions with temperatures from -2°C to -12°C Suitable for alpine skiing, freestyle skiing, snowboarding & Nordic skiing 100% fluorine-free – environmentally friendly and high-performance Application: Clean the base with Base Cleaner before waxing. Iron on hot wax with waxing iron at 130 – 150°C. Allow to recrystallize for at least 2 hours at room temperature. Remove excess wax with plexiglass blade. Brush out with steel or copper brush, then polish with nylon brush. Optimization tips: For extreme temperatures (very cold, warm or dry), the first layer of hot wax can be adjusted with Hot Wax Additives. For short-term weather changes, a Paste Wax allows quick and easy rewaxing. For maximum performance, seal the final layer with a Fine Tuning Powder, Block or Spray. Product details FZERO Zero HOT WAX | MEDIUM 100g – special racing wax for cold conditions Basis: Racing wax blend with gliding additives Content: 100g Color: cast in block Optimize your ski performance with the HOT WAX | COLD from FZERO!

The Zero HOT WAX | Warm from FZERO is a special racing wax mixture for medium conditions. Hot waxing significantly improves the gliding properties - ideal for ambitious winter sports enthusiasts. Area of application: For wet snow conditions with temperatures from -0°C to -6°C Suitable for Alpine skiing, freestyle skiing, snowboarding & Nordic skiing 100% fluorine-free - Environmentally friendly and powerful Application: Before waxing, clean the base with Base Cleaner clean. Hot wax with waxing iron at 120 - 140°C iron on. For at least 2 hours at room temperature to recrystallize. Remove excess wax with a plexiglass blade. Remove with steel or brush, then polish with a nylon brush. Optimization tips: At extreme temperatures (very cold, warm or dry), the first hot wax layer can be treated with Hot Wax Additives can be adapted. In the event of short-term weather changes, a Paste Wax to rewax quickly and easily. For maximum performance, apply the last layer with a Fine Tuning Powder, Block or Spray seal. Product details FZERO Zero HOT WAX | Warm 100g - Special racing wax for cold conditions Basis: Racing wax blend with glide additives Content: 100g Color: poured in block Optimize your ski performance with the HOT WAX | Warm from FZERO!