Holmenkol Racing Black Bar Red 150 g

Impresses with its extreme abrasion resistance and wide range of applications. Excellently suited as transport wax. Ironing temperature 125~135 °C. Product advantages Holmenkol Betamix Red: BETAMIX World Cup Skiwax RED Highest quality 12 base and training wax based on hydrocarbon For all types of snow For snow temperatures from -4° to -14° C 150 gr

Impresses with its extreme abrasion resistance. Ironing temperature 115~125 °C. Product advantages Holmenkol Alphamix Yellow: Highest quality base, base and training wax based on hydrocarbon 150 gr For soft, new and fine-grained snow For snow temperatures from 0° to -4°C

The Holmenkol Racing Black Bar Yellow is the next evolution of the well-known FF World Cup Bars. The specially adapted carbon formulation makes a difference where it counts: more base speed, better glide, and a wax that lasts the entire race. Holmenkol Racing Black Bar Yellow—for warm conditions An enhanced version of the well-known FF World Cup Bars with a specially adapted carbon modification Measurably better speed and glide performance than its predecessor Tested by the World Cup team Improved mechanical properties and greater wear resistance Maximum water and dirt repellency Very high acceleration, top marks for glide performance and abrasion resistance Ironing temperature: 115 to 125 degrees Fluorine-free, 150 g bar When do you use Yellow Yellow covers snow temperatures from 0 to -4 degrees, meaning fine to coarse-grained as well as wet snow. If it gets colder, go with Red (-4 to -10 degrees) or Blue (-8 to -15 degrees). In borderline conditions, the snow is the deciding factor, not the air temperature: Always measure in the snow, not in the sun. Here’s how to use it Clean the base, apply the wax by ironing at 115 to 125 degrees, let it cool, peel it off, and brush it out with a nylon and horsehair brush. Depending on the application thickness, a 150-g bar is enough for about 15 to 25 pairs of alpine skis. Frequently Asked Questions Is the wax fluorocarbon-free?Yes, the entire Racing Black Bar series is fluorine-free and complies with the regulations of international skiing federations. Do I need to apply a top finish on top of it?Not necessarily. However, when used in combination with a World Cup Finish Powder or Speed Block, you’ll get even better results. How should I store the wax?In a cool, dry, and dark place. That way, it will remain ready for use for years.

The Holmenkol World Cup Finish Powder Red+ is the top layer in the race base. Fluorine-free, highly abrasion-resistant, and designed specifically for the area where many races are decided. Holmenkol World Cup Finish Powder Red+ - Finish for -1 to -6 degrees Fluorine-free high-performance finishing powder For fine to coarse snow as well as wet snow Snow temperatures ranging from -1 to -6 degrees Increases speed and acceleration Very high abrasion resistance, even over longer distances High dirt repellency Ironing temperature: 150 to 160 degrees 30 g can Red+ or Red The advantage lies in the temperature range: Red+ works from -1 to -6 degrees, while the standard Red works from -4 to -12 degrees. For snow just below freezing—as is typical in spring races or on artificial snow—go with the Red+. Yellow covers 0 to -4 degrees, and Blue covers -10 to -20 degrees. Here’s how to use it Sprinkle a thin layer onto the already waxed and brushed base, iron it on quickly at 150 to 160 degrees, let it cool, and brush it out with a horsehair and nylon brush. Use sparingly: 30 g is enough for many pairs. Frequently Asked Questions Does the powder replace the base wax?No. It is the final layer applied over a suitable glide wax—not a substitute for it. What kind of wax iron do I need?A digitally controlled iron with a thick plate. The temperature must remain stable between 150 and 160 degrees. Is it fluorine-free?Yes, completely fluorine-free and compliant with competition rules.

The Holmenkol World Cup Finish Speed Block Red is the finish for the start area. No waxing stand, no iron, no waiting: apply it, buff it in, give it a quick brush, and you’re off. That’s exactly what makes it so practical for everyday racing. Holmenkol World Cup Finish Speed Block Red—Speed without a waxing stand High-performance special polymer wax formula Powder technology developed for the World Cup, based on special waxes and polymers Extreme acceleration and top speed Very long-lasting with excellent coverage Highly abrasion-resistant due to the hardness of the materials For fresh snow or damp old and artificial snow Snow temperatures from -6 to -12 degrees 10 g cube in the box Where it really shines In the starting area, when conditions are different than expected just before the race. Apply, rub in with the cork, brush out briefly—it takes two minutes and requires no tools other than a cork and a brush. For basic preparation at home, iron-on wax remains the foundation. Which color is best? Red covers -6 to -12 degrees, Blue covers the cold range from -12 to -20 degrees. Measure the snow temperature, not the air temperature. Frequently Asked Questions Do I have to iron on the block?No, that’s exactly the point. Apply, seal, brush. How long does one application last?For the duration of a race. For a full day of training, an ironed-on finish is the better choice. Is 10 g enough?Yes, the product goes a long way. One cube is enough for many applications.

The FINE TUNING BLOCK | Medium from FZERO is a rub-on Booster for the last layer of race preparation. It optimizes the gliding properties especially for medium snow conditions and ensures a perfect finish before the race. Area of application: For medium snow conditions with temperatures from -6°C to -20°C Suitable for Alpine skiing, freestyle skiing, snowboarding & Nordic skiing 100% fluorine-free - Environmentally friendly and powerful Application: Before use, clean the base with Base Cleaner before use. Apply the Fine Tuning Block very finely and homogeneously onto the ski base. With cork, pad or massage in well. Then rub in with a nylon or polish with a nylon or horsehair brush. Optimization tips: Before use, apply the appropriate Paste Wax or hot wax for the conditions. In extreme snow conditions, the base wax can be mixed with hot wax additives can be optimized. The Fine Tuning Block is used in particular on old, dry to damp artificial snow as the final as the final layer. Product details: Basis: Future glide additive with color poured into block Content: 25g Achieve the perfect glide for your race with the FINE TUNING BLOCK | Medium from FZERO!

The HOT WAX | Medium from FZERO is a special wax mixture for the training of all snow sports equipment in medium conditions. It not only improves the gliding properties, but also protects the base from oxidation and drying out. Field of application: For medium snow conditions with temperatures from -2°C to -12°C Suitable for Alpine skiing, freestyle skiing, snowboarding & Nordic skiing 100% fluorine-free - Sustainable and powerful Application: Clean base with Base Cleaner before use. Heat wax with waxing iron at 130 - 150°C iron on. For at least 2 hours at room temperature to recrystallize. Remove excess wax with a plexiglass blade. Brush out with a steel or copper brush, then polish with a nylon brush. Optimization tips: The right training wax depending on the conditions. Ideal for quick preparation of new material during training. In extreme temperatures, the base wax can be mixed with hot wax additives can be optimized. Product details: Base: Wax mixture with glide additives Available in: 200g Prepare your skis or snowboard optimally for training - with the HOT WAX | Medium from FZERO!

The Holmenkol Ski Tour Wax Stick is a practical universal wax for touring skins and ski bases. The compact wax stick can be rubbed on directly and quickly ensures better gliding properties on ski tours – whether on the ascent or descent. The wax cares for touring skins particularly gently and at the same time improves the gliding properties of the ski base. This reduces the formation of clods and keeps the material performing for longer. Application is quick and easy, ideal for on the go during the tour. Holmenkol Ski Tour Wax Stick – Advantages Universal wax for touring skins and ski bases Improves gliding properties on the ascent and descent Gentle care for all types of touring skins Reduces clod formation in wet snow Quick and easy application by rubbing on Suitable for all types of snow and temperatures Environmentally friendly paper packaging Application Rub wax directly onto touring skin or ski base Rub in or spread lightly as required Ideal for quick application on the go Technical data ProductHolmenkol Ski Tour Wax Stick Contents50 g Area of applicationSki touring, touring skins, ski base Temperature rangeFor all types of snow and temperatures ApplicationRubbing onto skin or base PackagingEcological paper packaging FAQ about the Holmenkol Ski Tour Wax Stick What is the Ski Tour Wax Stick used for? The stick is applied to touring skins or ski bases to improve gliding properties and reduce clod formation. Can I use the wax at all temperatures? Yes, the Ski Tour Wax Stick is a universal wax and is suitable for all types of snow and temperature ranges. Is the wax also suitable for on the go? Yes, thanks to the compact stick shape, the wax can be applied quickly and easily directly on the tour.

The Holmenkol Natural Skiwax Stick is a biodegradable ski wax stick for quick waxing on the go. Simply rub on, polish with the integrated felt, and start immediately with improved gliding properties. Holmenkol Natural Skiwax Stick – biological ski wax for on the go When the base becomes dull, you need a quick solution. With this practical wax stick, you can improve the glide of your skis or snowboard in just a few seconds. The wax is applied directly to the base and then polished with the integrated felt. The biological formula cares for the base and ensures reliable performance in all types of snow and temperatures. Product details Biodegradable ski wax Quick application without tools Rub on wax and polish with felt Improves gliding properties Cares for the base Suitable for all types of snow and temperatures Innovative cardboard packaging Content: 50 g Area of application Alpine skis Snowboard All Discipline Quick service on the go FAQ How is the Natural Skiwax Stick used? You rub the wax directly onto the base and then polish it with the integrated felt. What temperatures is the wax suitable for? The wax works in all types of snow and temperatures. Does the wax need to be ironed in? No, the stick is designed for quick rubbing and polishing without an iron. Is the wax environmentally friendly? Yes, the Natural Skiwax Stick is biodegradable and comes in sustainable packaging.

The PS series is a great glide wax for training and competition with good gliding properties.The speed of the iron should be approx. 8-10 seconds on a skater ski. The wax can be reheated after cooling to room temperature (10 minutes) for better durability. Scrape after approx. one minute. It is important to have a good iron to achieve efficient melting of the wax. PS8 RED -4°C to +4°C (25°F to 39°F). PS8 is an economical training and racing wax as well as a basic preparation wax for warm skis. Easy to melt and very easy to work with. Recommended iron temperature: 130 ° C (266 ° F). Replaces the CH8X.