Buy skis

The jagged profile in combination with a rounded contact surface improves grip on harder surfaces. By simply placing the trekking pads on the hard metal tip of your Leki trekking poles, they are protected - but at the same time the pads also reduce noise on impact. They are robust thanks to the vulcanized material, which absorbs shocks from the pole and is very resistant. At the same time, your wrists and arms are protected to ensure exceptional comfort. Excellent grip and easy installation thanks to plug-in connections make the rubber pads from Leki indispensable companions. Scope of delivery 1x piece

Who hasn't experienced it when the ski skins start to come loose and the ascent has not yet been completed or the day is still young? The Colltex Quickspray adhesive for on the go. Only suitable for partial application, not for the complete renewal of the adhesive surface. Not suitable for COMBIN and CLARIDEN.

For ski skins with hotmelt adhesive layer Complete renewal of the adhesive layer Partial renewal of the adhesive layer Tube with 75 ml content

Colltex Skinproof is a long-lasting impregnation for ski skins. It reliably protects your skins from moisture, reduces the build-up of snow and supports clean gliding properties in changing conditions. Especially on longer tours, this care helps you to maintain the function and service life of your ski skins. Impregnate ski skins for better performance When ski skins absorb moisture, they can become heavier and snow can stick more easily. With Colltex Skinproof, you can treat your skins specifically so that they remain more water-repellent and perform better on tour. This is particularly practical in wet snow, changing temperatures and demanding conditions. Your advantages with Colltex Skinproof Long-lasting impregnation for ski skins Protects against moisture and humidity Helps to prevent the build-up of snow Supports better gliding properties Can extend the life of the skins Ideal for touring, splitboard, and ski mountaineering Application of Colltex Skinproof Apply the impregnation evenly to clean and dry ski skins. Allow the product to work in well and follow the manufacturer's instructions. Regular care will help you to maintain the function of your skins in the long term. Who is Skinproof suitable for? Colltex Skinproof is suitable for anyone who wants to reliably care for their ski skins. Whether on short ski tours, long ascents or in difficult snow conditions: Good impregnation ensures more function and less trouble on the go. What does impregnation do for ski skins? Impregnation protects ski skins from moisture, reduces the build-up of snow and supports better gliding properties on tour. How often should you impregnate ski skins? It depends on the use and the conditions. If your skins get wet frequently or snow clings strongly, it's worth treating them again. Which skins is Colltex Skinproof suitable for? The product is suitable for ski skins and is ideal for touring ski and splitboard skins that require regular care. Why does snow cling to ski skins? When skins absorb moisture or conditions are changeable, snow can stick more easily. Suitable impregnation helps to reduce this.

Colltex ski skin sack made of microfiber Pro-Skin Ski skin sack from Colltex The Pro-Skin ski skin stocking replaces the cover film to protect the adhesive surface. Handling is uncomplicated and quick and easy, especially in windy conditions. If you want to stow the ski skins in your rucksack, put your hand in the skin stocking and pull it over your arm, then stow the ski skin in the stocking and wrap the rest around and you're done. Scope of delivery 2x microfiber ski skin stocking Stocking length 65cm

The established Dynafit rubber tensioner allows the skin to be fixed to the ski absolutely securely and quickly - and weighs just 8g. The system is used and appreciated by racers and "normal users" alike.Scope of delivery: 1 pair of Speedskin Fix long

The "hotmelt tape" is the best way to completely recoat the ski skin with a hotmelt adhesive layer. If possible, first remove old glue residue and dirt from the adhesive layer of the ski skin. Unroll the tape at room temperature with the foil side down to the length of the ski and fix the ends. Stick the ski skin with the adhesive layer onto the hotmelt tape and press it down lightly. Now cut the tape to the correct size along the edge of the ski skin. Now turn the ski skin and heat the tape with an iron at approx. 120 degrees slowly and with light pressure. This transfers the adhesive. Allow it to cool well before removing the film and attaching the cover net to the adhesive layer.

The perfect assembly set consisting of 2 camlock end hooks, 2 perforated straps, 6 rivet heads and 6 rivet bases. Center the camlock strap on the adhesive layer and press firmly. Pierce through the pre-punched holes with riveting pliers or an awl. Push the lower parts of the rivets through the holes, place the rivet heads on and tap the rivets together with a hammer. Cut the ski skin at the back up to the contact zone on both sides. 2 End hooks 2 perforated straps 6 rivets + carpet pad

The Porsche ski bag is an elegant and stylish bag made of durable and high-quality material that protects your skis while traveling. Its space is designed for a pair of skis with a length of up to 180cm and it has a centrally placed zipper, which allows easy access to the contents. The generous shoulder straps allow the bag to be carried either over the shoulder or in the hand. Compression straps secure the skis and ensure that the bag remains compact. Technical data Head Porsche Skibag 180cm: Volume 63L Easy access DIMENSIONS: 180 * 14 * 25 CM WEIGHT: 840 gm Ski bag for 1 pair of skis Porsche I HEAD Design Easy access Compression straps High quality and durable material

Fastening system for ski skins. Can be easily clamped to the end of any ski. Camlock by Colltex is a fastening system for Colltex ski skins. It is made of unbreakable plastic and stainless steel and can be used with any ski end.

These colltex adhesive pads help quickly when the ski skins come off or the adhesive surface is dirty in some places. Set of 10 sheets (60 x 75mm)

Leki Touring plate with large diameter and larger contact surface for retrofitting Leki trekking and ski poles for use in snow or very soft ground. The touring plate can be easily screwed onto the pole using the internal thread. 95mm diameter. Scope of delivery: 2x Leki touring plate

The "hotmelt tape" is the best way to completely recoat the ski skin with a hotmelt adhesive layer. If possible, first remove old glue residue and dirt from the adhesive layer of the ski skin. Unroll the tape at room temperature with the foil side down to the length of the ski and fix the ends. Stick the ski skin with the adhesive layer onto the hotmelt tape and press it down lightly. Now cut the tape to the correct size along the edge of the ski skin. Now turn the ski skin and heat the tape with an iron at approx. 120 degrees slowly and with light pressure. This transfers the adhesive. Allow it to cool well before removing the film and attaching the cover net to the adhesive layer.

The reusable cover net prevents soiling and drying out of the hotmelt adhesive layer on colltex skins.140mm/2x0.95m

Self-assembly set with 2 Hexagon end hooks, 2 perforated straps, 6 top and bottom rivets.

Universal liquid wax for cross-country skis, especially suitable for skis with mechanical climbing aid (scale skis). For all types of snow and temperatures. Features: Snow Temperature Range: 0 to -30°C Content Weight: 200ml Based on natural raw materials Quick and easy to use Improves the gliding properties and cares for the base Ideal size for ski preparation at home

2 STANDARD skin tips with tip caps for all ski models. The 80mm bracket fits all common models and can be easily attached to your skin with the rivets. Skin hanger 80mm Mounting rivets

The practical mounting set consisting of 2 elastic cords, 2 folding cord stoppers, 2 washers.

Easily adjustable end hooks made of unbreakable plastic with easy handling for all ski models.

Simple to use, super durable, and easily foldable. Union aluminum touring poles will get you through any splitboard tour, long or short. Size Range: 110-135cm Foldable (Min Length: 40cm) Powder Basket Fast Lock System Extended Handle Grip

The reusable cover net prevents the hotmelt adhesive layer of Colltex skins from soiling and drying out.

The Colltex Natural skin+ ski wax is a biological wax for ski skins and ski bases. It significantly improves gliding performance and reliably reduces balling in changing snow and temperature conditions. Ideal for tours where you want to be light, flexible, and prepared. Thanks to the natural formula, the wax is environmentally friendly and gentle on materials. It can be applied quickly and is perfect for use on the go – whether on the skin or directly on the ski base. Colltex Natural skin+ ski wax – natural, effective, practical Biological wax: Environmentally friendly care for skins and bases Better gliding: Noticeably less friction on ascents and flat sections Anti-balling: Reduces snow adhesion in wet snow Versatile use: Suitable for ski skins and bases Ideal for on the go: Quick and easy to apply Technical data ProductColltex Natural skin+ ski wax TypeBiological wax Area of applicationSki skins and ski base EffectImprove gliding, reduce balling Special featureEnvironmentally friendly, ideal for on the go FAQ Can I apply the wax directly to the ski skin? Yes, the wax is specifically developed for ski skins and can be applied directly to the skin. Is the wax also suitable for the ski base? Yes, it is suitable for both ski skins and ski bases. Does the wax help with wet snow? Yes, it effectively reduces balling in wet and changing snow conditions.

The lightweight and practical touring wallet for your rucksack - made from ski skin remnants. Ideal for credit cards, notes and coins. The color of the product may differ from the picture, as these wallets are sewn from ski skin remnants.

The PRD 12 GW stands for great sport. The PowerRail technology gives you a secure feeling in any terrain as well as improved stability and durability. Of course, you can also rely on easy handling, maximum flexibility and optimum performance. The RX shoe, equipped with full diagonal release, TRP system and a GripWalk AFS in conjunction with the diagonal heel help to reduce the risk of injury. Getting in and out is super easy thanks to the three-part heel.With this ski binding, you are already a winner. Our PowerRail bindings can be mounted on all skis with a pre-mounted PR Base. Stand height: 33.5 mmDIN: 3.5 - 12

Spare part: deep snow plate for ski touring poles. 1 pc.

The name says it all: The Elite Lady is elegant and very slim and filigree thanks to its 14 mm shaft made of aluminum HTS 5.5. The design of this ski pole is also exceptional. The grip is reinforced with additional thermal material for excellent insulation and warmer hands. The steel tip ensures controlled pole use. Technical data Leki Elite Lady Black/White: Construction: Fixed lengthGrip: PA Safety (Thermo)Strap: Lock Security Strap (Neoprene) (60% rubber, 40% nylon)Tube diameter: 14 mmTube material: Aluminum (HTS 5.5)Cup: Alpine (Racing)Tip: Flex Tip (Alpine)

Leki Trigger replacement strap for alpine skis. Infinitely adjustable with Velcro strap. Size M-L-XL

The NTN mounting plate kit allows you to use the same binding for a second pair of skis without removing any screws from the existing ski. The mounting plate only fits bindings from season 12/13. For older bindings you need to contact us to get a different mounting plate.

The SPX 14 Rockerace is a binding designed for competitors and is derived from the World Cup models with which it shares the Hod Red color. It offers excellent grip thanks to a very long elastic release path and ensures immediate transmission of forces, better absorption of shocks and maximum limitation of false releases. Its short mounting zone and semi-suspended heel improve the flex of the ski and provide an extra dose of precision and control. It is only compatible with skis with an R22 lens and boots that meet the ISO 5355 A standard and GripWalk® (future ISO 23223 A standard).

2 skin stirrups with tip caps including top and bottom rivets for self-assembly. Suitable for all ski models.

Screw set 18 pcs. complete for NTN Freeride and Freedome

Rottefella NTN Freeride Black offers you unsurpassed edge control and a range of benefits. The Telemark NTN binding gives you the simplicity and security of an alpine ski binding without sacrificing freedom in your heel. The 10mm spacers are ideal for carving and racing.

The Spray glue for climbing skins is the quick and easy solution when skins no longer stick properly on the go. With the smallest container on the market (50 ml), it fits in any pocket and is ready to use immediately. The adhesive is compatible with all classic adhesive climbing skins and ensures that your skins stick reliably even in critical situations. Advantages of the spray adhesive for climbing skins: Emergency solution for on the go - skins immediately ready for use again Smallest container on the market: handy 50 ml Compatible with all classic adhesive climbing skins Easy to use thanks to the spray head Lightweight and compact - ideal for touring backpacks Technical data: Content: 50 ml Item no.: 10-0007170900 FAQ about spray adhesive for climbing skins When should I use the spray adhesive? Whenever your climbing skins no longer stick reliably during a tour and a quick solution is required. How long does the effect last? The spray adhesive is intended as an emergency aid. The adhesion is usually sufficient for the rest of the tour. Afterwards, the skin should be thoroughly renewed or re-glued at home. Which skins is the adhesive compatible with? It is compatible with all classic adhesive climbing skins and can be used universally. How much does the can weigh? The small 50 ml can is extremely light and fits easily into any jacket or rucksack pocket.

The perfect tail attachment for every splitboard. Center the tape on the adhesive layer and press firmly. Pierce through the pre-punched holes with riveting pliers or an awl. Push the lower parts of the rivets through the holes, put on the rivet heads and tap the rivets together with a hammer. Cut the ski skin at the back up to the contact zone on both sides. 2 end hooks Split 2 Perforated straps 12 rivets + carpet pad

Kessler ski pole Black - The perfect ski poles for demanding skiers, made of high-quality carbon for maximum stability and lightness. High quality carbon: For maximum stability and low weight on intensive descents. Ergonomic grip: Provides a secure grip and comfort for Lange days of skiing. Robust and durable: Designed to handle even the most demanding conditions with ease. The Kessler ski poles Black complement your equipment perfectly and offer ideal support on every descent.

Designed specifically for competitive skiers, the SPX 12 ROCKERACE binding is based on our Hot Red style World Cup design. It offers an extremely long Elastic Travel for reliable hold, direct power transmission and high shock absorption to minimize the risk of false releases. Thanks to a short mounting zone and the partially sprung heel section, the ski can be controlled with even more flex and precision. It is only compatible with skis with an R22 plate and boots that comply with the ISO 5355 A and GripWalk® ISO 23223 A standards.

The Fritschi safety strap set offers reliable protection for your skis. The safety strap serves as a safety pin and can only be used in combination with a ski stopper. It ensures that your skis do not get lost in the event of a fall or unintentional release from the binding and remain securely attached to your boot. Loss protection for skis Can only be used in combination with a ski stopper With the Fritschi safety strap set you have the additional security of knowing that your skis are always well secured on tours.

The Toko Skincleaner is a specially developed cleaning fluid for cross-country and touring skins. It reliably removes dirt, dust and wax residue from the skin zones without impairing adhesion or gliding properties - ideal for regular care and long-lasting skin performance. Toko Skincleaner - Gentle care for coat zones & touring skins The gentle formula preserves the structure of the coat while effectively removing dirt. Application is quick and easy - ideal before the ascent or after an intensive day in the snow. Perfect for anyone who wants reliable grip and good gliding properties. Cleaning fluid for cross-country & touring skins Thoroughly removes dirt, dust & wax residue Gentle formula - preserves skin structure & function Improves adhesion & gliding properties of the skins Easy to use with a cloth or rag Content: 70 ml / 2.37 fl oz With the Toko Skincleaner you can care for your skins sustainably and ensure optimum performance for every use in the snow.

Rottefella NTN Freeride offers you unsurpassed edge control and a number of advantages. The Telemark NTN binding gives you the simplicity and security of an alpine ski binding without sacrificing freedom in your heel. Users can choose from four different power tubers or springs: Green (soft) or Blue (medium) to reflect skiing style or preference. Ski breaks are included. Standard stoppers are 95 mm wide, while a 115 and 125 mm wide stopper is available as an accessory. The new standard is making a difference in telemark skiing. The Rottefella NTN telemark binding with its unique boot binding system is in a class of its own. Simpler, stronger, safer and more user-friendly for the skier. The Easy in - Easy out system makes it possible to close the binding simply with the ski pole, without bending down. - Finer ski control thanks to quick edge-to-edge response - Release function (spring can be adjusted to boot size and weight) - Ascent function, climbing aid and 95mm stopper included - Long Medium version with harder blue spring. Here the binding construction and performance are completely different from what you have experienced and tried so far. In short - NTN gives telemark skiers more control and a new skiing experience.

Cleaner for ski tour skins and Nordic climbing skins.Gently cleans the skins of dirt and wax residues. Climbing and gliding properties are improved again. The cleaner does not attack the skins' adhesive. Application: Moisten Care Fleece with Skin Cleaner. Gently clean the skins in the direction of travel.

The POMOCA Power Hook is a particularly durable and non-slip rear hook for climbing skins. It is easy to adjust, fits reliably and ensures optimum grip on every ski. This makes it the ideal solution for anyone who expects maximum safety and durability from their touring skins. Advantages of the POMOCA Power Hook: Super resistant hook for long durability Non-slip fit - even in difficult conditions Quick and easy adjustment Reliable fixation of the skin at the end of the ski Easy handling even on the go Technical data: Product: Power Hook Function: Rear hook for climbing skins Item no.: 10-0007185703 FAQ about the Pomoca Power Hook Which skins is the Power Hook suitable for? The Power Hook is compatible with all common Pomoca climbing skins and can be used universally. How is the Power Hook adjusted? Adjustment is quick and easy using the integrated system - without any special tools. Is the hook secure even in icy conditions? Yes, the Power Hook has a non-slip design and stays securely in place even in difficult conditions. Can I replace the hook myself? Yes, the Power Hook is designed so that it can be easily replaced or retrofitted if necessary.

The Pomoca two-tone wax is a simple "2 in 1" ski wax that helps you to quickly adapt your skins to different snow conditions. It reduces stud formation, improves glide and comes in a compact nylon bag including a mini ice scraper to remove ice from the skins. Pomoca two-tone wax – flexible, practical, fast With two differently coordinated wax sides, you are equipped for changing conditions. Application is uncomplicated, the format is ideal for touring. Whether fresh powder snow or wet sections – the wax ensures that your skins work efficiently. Quick adaptation to different snow conditions Two wax sides for flexible use Compact nylon bag including mini ice scraper Prevents stud formation and improves glide Perfect for ski touring and changeable conditions Technical data ModelPomoca two-tone wax Type2-in-1 ski wax Scope of deliveryWax block, nylon bag, mini ice scraper Area of applicationSki touring, changing snow conditions FAQ What is the two-tone wax suitable for? For quickly adapting skins to different types of snow and conditions. Can I also use the wax on the go? Yes, thanks to the compact bag and mini scraper, it is ideal for touring. Does the wax help prevent stud formation? Yes, it reduces stud formation and noticeably improves glide. Which skins is the wax suitable for? It is universally suitable for all common climbing skins.

The Jones Flip-Lock Talon Pro Black Pole is a high-quality, telescopic ski pole, specially developed for splitboarders and ski tourers. Made from lightweight and robust carbon, it offers optimum stability and flexibility. Thanks to the flip-lock mechanism, the pole can be quickly adjusted to the desired length, making it ideal for demanding tours in alpine terrain. The ergonomic grip ensures a comfortable hold, even on Lange ascents. With its minimalist design in black, the Jones Flip-Lock Talon Pro is both functional and stylish, perfect for tourers who value performance and design. Lightweight and robust carbon ski pole Flip-Lock mechanism for quick length adjustment Ergonomic grip for maximum comfort Ideal for splitboarders and ski tourers Stylish, minimalist design

The Pomoca Back Fix Hook are sturdy, easily adjustable hooks for attaching climbing skins. They are specifically designed for the Back Fix Tail Strap System and offer reliable hold and easy handling—ideal for ski tourers who value safety and durability. Advantages of the Pomoca Back Fix Hook: Very sturdy and durable Easy adaptation to different ski tips Compatible with the Back Fix Tail Strap Reliable grip even on long tours Available as a pair or in a pack of 10 Technical Specifications: Product: Back Fix Hook Compatibility: Back Fix Tail Strap Contents: 1 pair (optional) FAQs about the Pomoca Back Fix Hook What are Back Fix Hooks used for? They serve as rear hooks for attaching climbing skins to the tail of the ski. Which systems are they compatible with? The hooks are specially designed for the Pomoca Back Fix Tail Strap System. Can I replace the hooks myself? Yes, installation and replacement are straightforward and can be done without tools. In what quantities are the hooks available? They are available as a single pair (Item No. 10-0007185702) or in a pack of 10 (Item No. 10-0007160313).

The LEKI Fix sleeve 10 mm is used to securely attach ski pole bases to poles with a tube diameter of 10.5 mm. It ensures a stable connection between the pole tube and the plate so that your pole works reliably even under intensive use. A small but indispensable spare part for your ski poles. Technical data Leki Fix sleeve 10mm Product type Fix sleeve for ski poles diameter 10.5 mm Compatibility For ski pole plates on Leki poles Function Fixes the plate securely to the pole tube Scope of delivery 1 sleeve FAQ about the Leki Fix sleeve 10 mm Which poles does the sleeve fit? It is suitable for all Leki ski poles with a tube diameter of 10 mm. How is the sleeve used? The sleeve is attached to the pole tube and fixes the ski pole plate securely to the pole. Can I replace the sleeve myself? Yes, the sleeve can be replaced easily and without special tools. Is the sleeve available separately? Yes, it is sold individually and is an original Leki spare part.

The Leki Neolite Carbon is the ideal choice for all skiers looking for a lightweight and stable carbon ski pole with a classic strap. The high-quality tube made from 60 % carbon (CC 600) with a diameter of 12 mm ensures an optimum combination of stability and low weight. The ergonomic ProG PAS grip guarantees a tight grip between hand and pole, while the Lock Security Strap nylon neoprene strap can be infinitely adjusted. A sporty, reliable companion for ambitious ski days. Technical data Leki Neolite Carbon ski pole Construction Fixed length Segments 1 diameter 12 mm Tube material carbon Tube quality CC 600 (60 % carbon) Handle technology ProG PAS Grip material 2K Supersoft Strap Lock Security Strap Nylon Neoprene, infinitely adjustable Tip Flex tip with carbide pin Plate Racing | Trekking Lengths 110 - 135 cm (in 5 cm increments) FAQ about the Leki Neolite Carbon For which area of use is the Leki Neolite Carbon intended? The pole is made for sporty skiers who value a classic loop pole with a stable carbon tube. What advantages does the ProG PAS grip offer? The grip ensures close contact between hand and pole and therefore maximum control on every descent. Can I adjust the strap individually? Yes, the Lock Security Strap nylon neoprene strap is infinitely adjustable and adapts perfectly to your hand. Which tip is used? The pole has a robust flex tip with a carbide pin for precise grip on hard snow.

The Toko Skin Ski Kit is the ultimate solution for the care of your skin skis. It contains everything you need to clean, impregnate and keep your skins in top condition. With this kit, you can ensure that your skis always perform optimally and offer you a smooth skiing experience. What does the Toko Skin Ski Kit contain? Cleaner, 100ml: The Cleaner provides a thorough cleaning of your skins, removing dirt and residue and restoring their performance. Proof, 100ml: With the Proof product, you can effectively waterproof your skins to protect them from moisture and snow and extend their lifespan. Express Pocket, 100ml: The Express Pocket is perfect for when you're on the go. It allows you to quickly freshen up your skins when you are on the slopes to ensure optimum gliding properties at all times. Base Tex: This useful tool helps you maintain your ski bases to ensure consistent and efficient glide. With the Toko Skin Ski Kit, you can be sure that your skin skis are in top condition so you can enjoy full control and performance on the slopes. Get this kit today and experience the benefits of professional skin ski care.

Clément Noël may be the fastest slalom skier on the circuit, but he is also an aesthete and gourmet with whom the LOOK teams had the pleasure of designing a unique binding that reflects his personality. The SPX12 Rockerflex was derived from the model that Clément himself uses in racing. It offers a Lange elastic release path, instant power transmission and better shock absorption to minimize unwanted releases. Its short mounting zone and semi-suspended heel improve the flex of the ski and ensure optimum responsiveness and control. It is only compatible with skis with an R22 plate and boots that comply with the ISO 5355 A and GripWalk® ISO 23223 A standards.

Cramponfor additional grip in icy conditions. The crampon is available in different sizes and is compatible with every Dynafit binding. It can be attached to the binding very easily and quickly and guarantees additional grip and safety in icy conditions. Crampon Dynafit 90mm: Weight: 99g

2 skin stirrups EVO with tip caps for all ski models.

The BootSki from STOLT of Sweden fits on any type of ski boot and is the perfect addition to your ski equipment or as a beginner to improve your experience on the slopes. The BootSki is simple yet carefully thought out, design, functionality and flexibility serve to give you as the user the optimal experience. Use the enclosed size chart to determine your size, small, medium or large.

Welcome to Ramser, the ski brand that specializes in handmade skis. We are proud to present our latest innovation – the Ramser FIS SL Competition Ski. This ski is specially designed for slalom racing and meets the highest standards of the FIS norm. One of the main advantages of the Ramser FIS SL Competition: sandwich construction The sandwich construction of the Ramser FIS SL Competition consists of several carefully coordinated layers of materials. This construction combines low weight, high stability, and maximum performance. The result is a ski that is not only extremely durable and stiff, but also flexible enough to adapt to the needs of the skier. Another decisive advantage of the Ramser FIS SL Competition is its compliance with the FIS norm. This guarantees that the ski meets even the highest demands in competition. Each ski is handmade and subjected to strict quality controls to ensure that it meets FIS requirements. Ramser FIS SL Competition Double Titanal Extra Stiff Thanks to its extra stiff construction with Double Titanal, the ski remains stable even at high speeds and in extreme cornering conditions. This model is perfect for experienced skiers who are looking for maximum performance and want to increase their competitive advantage. In summary: The Ramser FIS SL Competition Ski is the perfect choice for anyone seeking maximum performance and unparalleled quality. With its sandwich construction, FIS norm compliance, and extra stiff construction, it will take your racing to the next level. Order today and experience the difference! Exclusive service for Ramser ski models All Ramser ski models can be refurbished free of charge in our own ski workshop as often as desired. World Cup race base Beech/ash wood core Double Titanal insert Biaxial carbon fiber Worldcup melamine sidewalls Polyamide antiscratch topsheet Supplied without binding Technical data Length Radius Shovel Center Tail 165 12.0 116 66 112 155 11.5 116 66 112 With the Ramser FIS SL Competition Ski, you get a model that combines precision, performance, and craftsmanship at the highest level. Perfect for ambitious skiers who want to be at the very front in competition.

The Ramser Black LTD is not just a ski, but a statement for all those who are looking for a special experience on the slopes. This ski combines the precision of a giant slalom ski with the agility of a slalom ski, making it the perfect all-rounder for ambitious skiers. Product features Precise tracking Light and sporty handling characteristics of a slalom ski Handcrafted Wood core made exclusively from Swiss wood Tried and tested sandwich construction for the highest quality Classic and exclusive designWorld Cup base Swiss Made wood core Double titanium insert Biaxial Carbon Fiber Melamine sidewalls Scratch-resistant polyamide surface Supplied without binding The Ramser Black LTD is the ideal choice for skiers who value quality, precision and an exclusive skiing experience. Exclusive service for Ramser ski models All Ramser ski models can be refurbished free of charge in our own ski workshop as often as required.Technical data length radius Shovel Center Rear 170 12.5 121 70 115 164 12 121 70 115 158 11.5 121 70 115 151 11 121 70 115 With the Ramser Black LTD you get a ski that combines the highest quality and craftsmanship. Perfect for skiers who don't want to compromise.

KANG Bamboo Freeride ski poles – Natural, robust and perfect for deep snow The KANG Bamboo Freeride ski poles made from 100% organic bamboo are the perfect choice for freeriders who value sustainability and exceptional performance. Each pole is unique thanks to the natural material and impresses with outstanding durability and minimal environmental impact. With the innovative KANG Detachable Strap System, you can easily remove the strap on powder days to ride safely. Main features Material: 100% organic bamboo Tube size: Top tube 22 mm Handle: 35 cm EVA handle for maximum comfort Strap: Detachable KANG Detachable Strap System Basket: 95 mm Powder Basket for deep snow Weight: Only 245 grams Swedish craftsmanship Made in Åre, Sweden, the KANG Bamboo Freeride poles combine Scandinavian design with a sustainable approach – ideal for those who love and respect nature. With the KANG Bamboo Freeride ski poles, you are perfectly equipped to fully enjoy your deep snow adventures.

The Tyrolia Superflex PR Base ensures optimum power transmission and maximum stability – whether on the piste or for sporty carving. Thanks to its low profile, the ski remains in its natural flex line, which noticeably improves the skiing experience. The system is suitable for all PR-compatible bindings and allows easy assembly as well as tool-free adjustment. Ideal for ambitious skiers who value precision and performance. Tyrolia Superflex PR Base – perfect connection between ski and binding Suitable for all Tyrolia PR bindings Flat, sporty design for direct ski contact Increased stability for dynamic skiing Tool-free adjustment of the binding position Perfect power transmission for more control

The Leki Racing / Trekking basket 50mm is a practical replacement plate for all Leki tips with thread. The plate is suitable for both alpine racing and trekking use and ensures reliable grip on snow and different terrain. It can be changed quickly and without any tools. Features of the Leki Racing / Trekking basket 50mm Diameter: 50 mm Compatible with all Leki tips with thread Versatile use for racing and trekking Simple and tool-free assembly Robust and durable for intensive use FAQ about the Leki Racing/Trekking plate 50mm Does the plate fit every Leki pole? Yes, the plate is compatible with all Leki tips with a thread. Can I change the basket myself? Yes, replacement is easy and requires no additional tools. For which uses is the basket suitable? The 50 mm cup is suitable for alpine racing as well as trekking and ski touring.

The perfect end attachment for every splitboard. To mount yourself.

The Pomoca Ski Brush Blue is the practical tool to quickly remove ice and snow from your skis and fixings before you stow them in the car or ski bag. Light, handy and robust - perfect for every day of skiing. Advantages of the Pomoca Ski Brush Easy cleaning - Removes snow and ice from skis and bindings Compact format - Fits in any bag or ski bag Robust bristles - Durable and effective Protects your equipment - Prevents damage from frozen snow Technical data The product Pomoca Ski Brush weight Light & compact Area of application Skis & Bindings FAQ about the Pomoca Ski Brush Can I also use the brush for bindings? Yes, it is ideal for removing ice and snow from the bindings. Does the brush fit in a ski jacket? Yes, the Ski Brush is compact and fits in any jacket pocket or ski bag. How do I clean the brush? Simply shake out or rinse under warm water, then leave to dry.

The only cleaner on the market specially developed for cleaning the skin strip of skin skis. Effective but gentle. Unique composition for cleaning skin strips of skin skis from dirt deposits such as grip waxes from the ski slope during skiing. The present composition does not contain aliphatic and aromatic hydrocarbon solvents, as their presence even in small quantities could lead to detachment of the skin strip from the base of the ski. Technical data Vauhti Skin Ski Cleaner: Package size: 80ml Instructions: Shake the bottle well. Apply to the skin. Wipe off with a cloth.

The all-rounder for every splitboard tour - from simple pre-alpine tours to demanding high-altitude tours. The composition of 65% mohair and 35% polyamide makes TÖDI a robust universal skin. Its maximum abrasion resistance guarantees a long service life, combined with its perfect climbing properties - hardly any more "slipping back". Its versatility together with the proven adhesive layer make the TÖDI our best-selling splitboard skin. Cut to size splitboard width: 160mm, splitboard length up to 170cm TÖDI Mix, blue, Hotmelt blue, Nose attachment: 100mm Tail attachment: Tail Fluke

Marker Stopper Duke / Jester / Tour - 90mm width Suitable for Marker bindings, the Marker Freeride stoppers offer optimal compatibility with all skis with a flat deck. Ideal as a spare part or for replacement if the binding is mounted on a new ski with a different width. Compatible with Marker Duke, Jester and Tour bindings Width: 90mm Suitable for skis with a flat deck For retrofitting or replacement when changing skis

The Ramser Green LTD is the ideal ski for the classic all-mountain skier who doesn't want to compromise on quality and performance. State-of-the-art design meets absolute top performance - whether you're carving your turns on icy slopes or wagging through deep snow, you can rely on the Ramser Green. For skiers who are at home on any terrain and ski where others only dream, the Ramser Green LTD is the perfect choice. The skis are made in a genuine manufactory (literally by hand) in an Italian ski factory near the Swiss border. A Ramser ski is lovingly crafted using the tried-and-tested sandwich construction method. The wood used in the core comes exclusively from Switzerland and is carefully tested to guarantee the highest suitability and quality. Rounded off by a classic and exclusive design that is timeless and stylish, this model offers an exceptional skiing experience. Product features Ideal for versatile all-mountain use Handmade in an Italian ski manufactory Swiss wood core in sandwich construction Classic and exclusive design Perfect for demanding skiers Exclusive service for Ramser ski models All Ramser ski models can be refurbished free of charge in our own ski workshop as often as required. World Cup base Swiss Made wood core Double titanium insert Biaxial Carbon Fiber Melamine sidewalls Scratch-resistant polyamide surface Without binding Technical data Lange Radius Shovel Center Tail 158 11.7 130 77 110 164 12.8 130 77 110 170 13.5 130 77 110 With the Ramser Green LTD you get a ski that combines Swiss craftsmanship, timeless design and versatile performance on any terrain. Perfect for ambitious skiers who don't want to compromise.

The BootSki Solid Black from STOLT of Sweden fits on any type of ski boot and is the perfect addition to your ski equipment or as a beginner to improve your experience on the slopes. The BootSki is simple yet carefully thought out, design, functionality and flexibility serve to give you as a user the optimal experience. Use the enclosed size chart to determine your size, small, medium or large.

The brand new Tekdapters step right into any alpine binding and instantly transform into an ultra-stable, low-friction pin binding for the ascent. Fold the adapters down to its smallest size and stash it in your pack to experience the descent without worry of accidental release. Ski in variable snow conditions with a whole new level of confidence in your trusted, unaltered alpine bindings with full support. With one simple purchase, you can tour with any ski you own now or in the future without having to buy expensive touring bindings again and again. Lightweight at only 530 g The TEKLOCK ascent aid was developed using 3D scan data collected from all current bindings on the market. The carefully thought-out cut-outs on the front of the jaw plates precisely enclose even the deepest and widest toe pieces, like the famous Salomon STH series, providing the freedom to tour with your most trusted bindings in the backcountry for maximum performance and safety in the backcountry.Glove and ski pole friendly TEKLOCK lever - Lock into the TEKDAPTERS with an easy to use quick release lever. Unlock the system with an oversized lever eyelet designed specifically for your ski pole, eliminating the need to bend over to release the adapter. SOLE-SYNC™ QUICK ADJUSTMENT SYSTEM The Sole-Sync™ system makes it a breeze to adjust the TEKDAPTERS to the sole length of your boots. Fold the TEKDAPTERS from a maximum length of 345 mm to a tiny 255 mm with a simple switch!Customize your size - The alphabetically scaled telescopic tubes can be shortened like ski poles to reduce the pack size to an unobtrusive 205 mm length. An internal catch wire that prevents the TEKDAPTERS from over extending can be tied off for a super quick and precise adjustment to your exact boot size every time.Tool-less AFD adjustment - The tool-less Anti-Friction Device (AFD) shims can be easily adjusted to the exact thickness of your shoe soles. From gripwalk soles (ISO 9355) to downhill soles (ISO 5355), SOLESYNC has you covered no matter how worn your boots are.Neutral position compensation - Just like the popular DAYMAKERS CLASSIC, the lowest mode of the TEKDAPTERS is designed at -2º. This negative angle compensates for the forward lean built into your ski boots and provides an incredibly comfortable upright stance when touring flat terrain, ridge lines and gentle descents.

The 16 mm thin slalom pole made of aluminum is your perfect companion in the fight for the last hundredths. The new Trigger 3D system offers more control thanks to a direct connection between glove and pole, improved ease of use thanks to quick clicking in and out and greater safety reserves thanks to an intelligent three-dimensional release that extends the release spectrum fourfold. The airfoil profile of the pole, which is based on aircraft wings, reduces air resistance and optimizes swing performance. Product advantages Leki WCR TBS SL 3D 2023: Weight: 277 g / piece with a length of 120 cm 4 non-slip finger recesses and an additional support surface offer optimum grip and maximum comfort Enables the mounting of Leki impact protection bars and the LEKI GoPro™ Compatible Adapter Ideal for racing conditions. The plates can be easily changed without tools For precise pole use and uncompromising grip regardless of the surface The perfect combination. Trigger S poles and Trigger S gloves ensure maximum skiing fun and outstanding comfort Tube material aluminum Tube quality aluminum (HTS 6.5) Grip technology Trigger 3D SL Grip size Standard Strap Technology Trigger Frame Strap Tip Pin

With its famous fluorescent yellow, the Orb Freebird with rocker has long been a standard for all types of ski touring. Its first-class, secure grip makes it the perfect companion for steep adventures. Its 91 mm waist is consistently designed for alpine skiing, it is light and skis optimally. It is a reliable companion for all your adventures, even on the steepest slopes.  Black Crows Orb Freebird features: Moderate width: 90 mm waist Front rocker: easy turning and high gliding ability Medium classic camber: classic camber under the binding with a moderate contact area: balance between stability and maneuverability Titanal reinforcement under the binding: Better grip Medium flex: forgiving and comfortable ski Tail with plastic insert and notch: Makes it easier to attach skins Orb Freebird suits you if you want the perfect balance between ascent and descent

The Leki Spitfire 3D Odermatt is the perfect companion for challenging descents in the backcountry and on the slopes. The model in the Marco Odermatt design combines a robust aluminum shaft (HTS 6.5) with a diameter of 16 mm and the innovative Trigger 3D system. This system ensures maximum control, fast clicking in and out and offers a fourfold extended safety spectrum thanks to the intelligent three-dimensional triggering. The new Trigger Frame Strap Mesh loop is wider, more comfortable and can be easily attached to the handle. With the Spitfire 3D, you are perfectly equipped for any terrain. Technical data Leki Spitfire 3D Odermatt Construction Fixed length Segments 1 diameter 16 mm Tube material aluminum Tube quality HTS 6.5 Handle technology Trigger 3D ProG Grip material 2K Supersoft Strap Trigger Frame Strap Mesh Tip Steel tip (in tube) with carbide pin Cup Cobra Alpin, interchangeable base: Big Mountain FAQ about the Leki Spitfire 3D Odermatt What is so special about the Trigger 3D system? It connects glove and pole directly, enables lightning-fast clicking in and out and increases safety thanks to a three-dimensional release. Who is the Spitfire 3D Odermatt suitable for? For sporty skiers who value safety, control and performance - whether on the piste or off-piste. Which tips are included? The pole comes with Cobra Alpine plates as standard, but Big Mountain interchangeable plates are also possible. What characterizes the Marco Odermatt design? The design was inspired by the overall World Cup winner and brings a sporty look to the piste.

The LEKI Fix sleeve 10 mm is used to securely attach ski pole bases to poles with a tube diameter of 10.5 mm. It ensures a stable connection between the pole tube and the plate so that your pole works reliably even under intensive use. A small but indispensable spare part for your ski poles. Technical data Leki Fix sleeve 10mm Product type Fix sleeve for ski poles diameter 10.5 mm Compatibility For ski pole plates on Leki poles Function Fixes the plate securely to the pole tube Scope of delivery 1 sleeve FAQ about the Leki Fix sleeve 10 mm Which poles does the sleeve fit? It is suitable for all Leki ski poles with a tube diameter of 10 mm. How is the sleeve used? The sleeve is attached to the pole tube and fixes the ski pole plate securely to the pole. Can I replace the sleeve myself? Yes, the sleeve can be replaced easily and without special tools. Is the sleeve available separately? Yes, it is sold individually and is an original Leki spare part.

The PRC 850 is a top cross-country pole for high demands. The anatomically shaped strap and the two-component cork grip ensure traction and control in every phase of pole use. The Trigger Shark 2.0 system offers easy handling as it allows quick release from the grip. Both the tip and the basket can be changed depending on the trail conditions and can also be adapted for summer training.

Kessler White ski poles made from high-quality carbon.

The Fritschi Tecton / Vipec Evo crampons are specially developed for the Tecton and Vipec Evo bindings and offer maximum grip on icy or hard snow conditions. These crampons are extremely easy to use and ensure that you always have additional stability and safety in difficult situations. They are available in different widths to fit your skis perfectly. Compatible with Tecton and Vipec Evo bindings Easy to use Maximum grip on icy surfaces Available widths: 90 mm, 100 mm, 115 mm With the Fritschi Tecton / Vipec Evo crampons you are ideally equipped for demanding tours and can ensure more grip and safety on icy passages.

The high-end Venom SL 3D racing pole for slalom use made of high-strength HTS 6.5 aluminum and aramid carbon is equipped with the new Trigger 3D slalom grip. The new Trigger 3D system offers more control thanks to a direct connection between glove and pole, improved ease of use thanks to quick clicking in and out and greater safety reserves thanks to an intelligent three-dimensional release. This allows you to concentrate 100% on setting the pace. The protective aluminium sheathing in the upper area additionally strengthens the pole and minimizes the risk of pole breakage when hitting the goalposts. Product advantage Leki Venom SL 3D: Perfect traction thanks to slim design Extra-soft surface for maximum grip Increased safety thanks to Trigger S 3D release technology Enables the mounting of Leki impact protection bars and the LEKI GoPro™ Compatible Adapter Quick, easy click-in & release Robust upper part made of aluminum, super light and stiff lower part made of carbon for perfect swing behavior Precise pole use and perfect grip in almost any terrain

The Leki Sherpa FX Carbon Strong is the most stable folding pole from Leki – made for your toughest tours. Whether with skis in deep winter or with crampons in summer: this pole delivers on its promises. The carbon upper section with a 20 mm diameter ensures extreme robustness. The folding and adjustment system combines maximum resilience with a compact pack size. Robust, foldable, uncompromisingly strong Aergon Air handle: ergonomic, non-slip & with rubberized back for more control Carbon and aluminum construction: extremely stable at only 317 g Speed Lock 1+: quick adjustment between 120–140 cm ELD folding system: ultra-fast and compact to stow away (pack size: 40 cm) Flex Tip tip: precise grip on any surface 2 plates included: Trekking 2.0 & Big Mountain Binding interchangeable plates Made for alpine challenges With this folding pole, you can master steep ascents, traverses, and descents with maximum support. The rubberized grip back offers a secure hold even on hairpin bends, and the grip extension allows flexible repositioning in difficult terrain. Technical details Adjustment range: 120–140 cm Pack size: 40 cm Weight: 317 g Construction: Foldable & infinitely adjustable (Vario) Handle: Aergon Air with 2K Foam Grip extension: 1K Foam Strap: Lock System Strap made of nylon/neoprene (adjustable) Material: Carbon PRC 1000 (upper & middle parts) + Aluminum HTS 6.5 (lower part) Folding system: ELD (External Locking Device) Adjustment system: Speed Lock 1 plus Plates: Trekking 2.0 + Big Mountain Binding (interchangeable plates) Tip: Flex Tip long

Did you know that we built our first ski at Nidecker in 1912? To celebrate our 135th anniversary, we decided to go back to our roots. The result is The SKI, an 80's inspired yet modern limited edition that we produced together with another innovative, market-leading high-tech brand from Switzerland: MOVEMENT SKIS. Based on the FLY TWO by MOVEMENT, The SKI is just as perfect for experienced pros as it is for weekend tourists. It does every trick and never lets you down on the slopes.

Stable and light at the same time - the three-piece Leki Guide 3 touring pole supports you on every ski tour. It is equipped with the new Aergon Air, which offers ski tourers even more comfort and control. The special cavity technology enables a lightweight construction. The large, supportive surfaces offer maximum support on the mountain. The back of the grip is fully rubberized. The large ergonomic support surface provides support on steep hairpin bends on the ascent. Thanks to Speed Lock 2, the length can be easily adjusted between 110 and 150 cm, even when wearing gloves. The ski touring pole is equipped with a large binding basket, which supports you when handling the climbing aid and skin.

The Ramser RED SL LTD is the dream of every speed lover. This race-oriented ski combines a wood sandwich construction with Titanal to deliver solid performance and responsive control. As our slalom pro with World Cup-proven race technology, the Ramser RED SL LTD is specially designed for short, fast turns. Manufactured in a small ski factory according to our specifications, the wood core comes exclusively from Swiss wood and is elaborately handcrafted. Product features Ideal for tight and fast turns World Cup-proven race technology Handcrafted Swiss wood core in sandwich construction Classic and exclusive design Perfect for technically experienced skiers The Ramser RED SL LTD is the perfect choice for skiers who are looking for an exceptional experience on the slopes and value precision and speed. Exclusive service for Ramser ski models All Ramser ski models can be refurbished free of charge in our own ski workshop as often as required. World Cup base Swiss Made wood core Double titanium insert Biaxial Carbon Fiber Melamine sidewalls Scratch-resistant polyamide surface Supplied without binding Technical data length radius Shovel center Tail 153 10 122 67 113 159 11 122 67 113 165 12 122 67 113 With the Ramser RED SL LTD you get a ski that combines maximum speed, maximum precision and Swiss craftsmanship. Perfect for ambitious skiers who want to dominate tight turns.

KANG Bamboo all-mountain ski poles - natural, robust and versatile The KANG Bamboo All-Mountain Ski Poles combine Scandinavian design with the natural strength of 100% organic bamboo. These poles are ideal for all conditions and offer exceptional durability and performance - perfect for freeriding and ski touring. Main features Material: 100% organic bamboo for maximum robustness Diameter: 16-18 mm KANG handle: Ergonomic, non-slip and sporty in design Adjustable strap: Easy to adjust with one hand, even when wearing gloves Weight: Only 260 grams All-mountain basket: 55 mm diameter Available in lengths from 100 to 135 cm Swedish craftsmanship Made in Åre, Sweden, the KANG Bamboo ski poles impress with their natural aesthetics and functionality. The combination of organic bamboo and innovative Scandinavian design makes them a unique companion on and off the slopes. With the KANG Bamboo all-mountain ski poles, you are perfectly equipped to master any challenge on the mountain with style and reliability.

The Head Supershape JRS 2026 is the ideal piste ski for young talents from around 8 years of age. Thanks to its lightweight design, balanced geometry and robust construction, it helps children take the next step in developing their skiing technique - whether after a ski course or on their first sporty descents. Head Supershape JRS 2026 - learning pleasure & control for children This ski impresses with its harmonious flex and stable handling - even at slightly higher speeds. The combination of camber under the binding and a slight rocker on the tip makes it particularly easy to initiate turns. This makes the Supershape JRS perfect for children who want to improve their technique on the piste. Including binding: JRS 7.5 GW CA The set comes complete with the JRS 7.5 GW CA binding - designed for young skiers. The binding is GripWalk-compatible, easy to use and provides additional safety and comfort. Technical details: Length: 110 cm Ski shovel: 119 mm Ski center: 68 mm Ski tail: 98 mm Radius: 6,0 m Weight: 1328 g (per ski without bindings) Camber/rocker profile: 85 % camber - 15 % rocker front - 0 % rocker rear Binding: JRS 7.5 GW CA (included, GripWalk compatible) With the Head Supershape JRS + JRS 7.5 GW CA children experience rapid learning progress and safe fun on the slopes - discover it now at ski-shop.ch!

The POMOCA Universal Buckle is a versatile fastening solution for climbing skins. Thanks to its clever design, it fits all standard ski tips on the market. This makes it the ideal choice for ski tourers looking for a reliable, universal and durable fastening. Advantages of the POMOCA Universal Buckle: One size - fits all ski tips Easy installation without special tools Durable and resistant construction High flexibility - compatible with various ski models Optimum hold even on Lange tours Technical data: Product: Universal Buckle Function: Front fur strap for ski tips Size: One Size Item no.: 10-0007180102 FAQ about the Pomoca Universal Buckle Does the buckle really fit all ski tips? Yes, the Universal Buckle is designed to fit all common ski models. Can I fit the buckle myself? Yes, assembly is straightforward and requires no special tools. Is the buckle robust enough for long tours? Yes, it is made of durable materials and offers reliable support even with intensive use. Can the buckle be replaced if necessary? Yes, the Universal Buckle can be replaced or retrofitted at any time.

The Leki downhill SG cones with a diameter of 32 mm are specially developed for racing poles in Super-G. They offer reliable stability and the best performance at high speeds. Thanks to their aerodynamic shape, they reduce air resistance and guarantee optimum power transmission on the race track. Features of the Leki downhill SG cones Diameter: 32 mm Especially for racing poles in Super-G Aerodynamic shape for minimal air turbulence Robust, lightweight material Easy mounting on compatible Leki racing poles FAQ about the Leki downhill SG bags Which poles are the bags suitable for? The 32 mm downhill SG bags are suitable for Leki racing poles in the Super-G range. Can I also use the bags for other disciplines? No. They are specially developed for Super-G, but can also be used in downhill races. How are the bags fitted? They are simply screwed onto the matching Leki tips with thread.

Leki Trigger S replacement strap for alpine skis. Infinitely adjustable with Velcro strap. M-L-XL

The SPX 12 KONECT GRIPWALK® binding Swiss LTD is a high-performance binding system that meets the requirements for aggressive skiing. The combination of Full Action toe piece and SPX automatic heel piece offer the market's longest Elastic Travel for unparalleled shock absorption. The result is direct power transmission and precise control with outstanding shock absorption to minimize the risk of false releases. The binding is compatible with both traditional alpine soles (ISO 5355) and GripWalk® boot soles. It fits sole lengths from 260 to 375 millimeters. The binding plates are included in the package.

"Of course, we have also developed highly functional crampons for the KINGPIN. The extremely light crampons can be attached from the side under the toe piece without having to get out of the binding. They guarantee excellent grip on icy or hard surfaces and function almost friction-free in the forward movement. Marker Kingpin/Alpinist 90mm crampons available in three different widths: 105 mm, 90 mm, 120 mm"

The Fritschi Vipec / Tecton stopper bracket makes it possible to easily replace the stopper bar on Tecton and Vipec Evo bindings without having to change the entire mechanism. The stopper bracket is available in different widths to ensure a perfect fit for your skis. Compatible with Tecton and Vipec Evo bindings Easy replacement of the stopper bracket, reuse of the mechanism Available widths: 80 mm, 90 mm, 100 mm, 110 mm, 120 mm With the Fritschi stopper bracket you ensure that your bindings are always optimally adjusted to your skis without having to replace the entire mechanism.

The Fritschi Tecton 13 is the perfect binding for freeskiers looking for an active, dynamic skiing experience in challenging terrain. This downhill-oriented pin binding offers maximum power transmission and precise control with low weight, ideal for deep snow descents, steep faces, couloirs and fast turns. With a DIN range of 5 to 13 and a weight of just 550 g per unit without stoppers, the Tecton is ideal for both ascents and descents. Segment: Free Skiing & Touring DIN adjustment range: 5 to 13 Weight: 550 g / unit without stopper Ski width: 90 / 100 / 110 / 120 mm stopper Alpine heel clamps with rail for maximum power transmission Lateral release at the front with 13 mm dynamic travel Frontal release at the rear with 9 mm dynamic travel Dynamic length compensation of 10 mm for constant edge grip Interchangeable color clips: Ice Blue as standard, also available in Yellow Green and Black The Tecton 13 is not only functional, but also visually adaptable thanks to the interchangeable Color Clips. Its high elasticity and the safety technologies of the alpine bindings ensure maximum reliability in every skiing situation, both on the ascent and on the descent. With an optimum material mix of high-tech plastics and metal alloys, the binding is lightweight yet extremely stable. Especially for freeride pros, the Tecton offers uncompromising performance, safety and comfort - for the ultimate skiing experience in the backcountry and on challenging slopes.

The Fischer The Curv Jr. offers young skiers optimum stability, control and balance. Thanks to its improved and lighter construction, it is not only particularly easy to handle, but also forgiving. The soft flex enables turning with little effort, making it ideal for beginners and advanced children. Technologies like Air Power and Fiber Tech guarantee maximum fun on the slopes. The easy-to-open binding of the new Junior Rail System rounds off the overall package perfectly so that children can ski safely and comfortably. Radius: 11 m Tail: 106 mm (tip) / 68 mm (middle) / 88 mm (tail) Weight per ski: 850 g Skill level: Beginner to advanced Activity: Piste

The Cross Ski "BLACK" from Mach offers the perfect combination of giant slalom and slalom characteristics for versatile, sporty performance. With a balanced mix of smoothness, speed and maneuverability, this handcrafted ski meets the highest demands and offers first-class skiing characteristics in every situation. Ski type: Cross ski Tailoring: 121 - 71 - 106 mm Radii: 181 cm (R17), 176 cm (R16), 170 cm (R14), 164 cm (R13), 158 cm (R11) Surface: Scratch-resistant, textured and brushed (polyamide) Structure: Multi-layer sandwich construction with wood core, fiberglass, carbon inlay and Titanal Binding options: Look SPX 12 Rockerrace with WC22 plate Tyrolia PRD 12 with Triflex PowerRail plate for optimum flexibility and GripWalk compatibility Sizes: 158 cm, 164 cm, 170 cm, 176 cm, 181 cm Whether for precise giant slalom descents or agile slalom maneuvers - the MACH BLACK Cross Ski combines durability, quality and versatile performance for all those who want to get the most out of their skiing day.

PALÜ Crystal - Alpinist ski skins - Maximum gliding properties for demanding ski tourers The PALÜ Crystal ski skins are specially designed for experts and sporty ski tourers who value maximum gliding properties. Made from 100 % natural fibers, they offer outstanding performance on fresh, dry and cold snow. For a longer service life and to protect the hotmelt adhesive layer, a cover net is included to protect the skins when not in use. Perfect for long and high alpine ski tours The PALÜ ski skins are ideal for long ski tours and multi-day touring adventures. Thanks to their exceptional gliding properties, they are the perfect choice for ski tourers who value maximum comfort and efficiency even on demanding alpine tours. Customization for your ski model We supply PALÜ ski skins perfectly tailored to your ski model. When selecting, please note the exact ski brand, model and length. The customized skins are available from CHF 240.00 and offer you a tailor-made touring experience.

TÖDI Crystal - All-rounder ski skins - The robust all-rounder for all ski tours The TÖDI Crystal ski skins are the best-selling all-round ski skins from Colltex and offer an ideal balance between gliding properties, climbing ability and robustness. They are suitable for all types of snow and weather conditions and score points with their compact pack size. To protect the hotmelt adhesive layer, a cover net is supplied to protect the skins when not in use. Versatile and reliable for every tour The TÖDI ski skins are suitable for ski tour beginners who value good grip as well as for experienced mountain guides who want to be able to rely on their equipment in all conditions. These skins are the perfect choice for ski tourers looking for a versatile and durable ski skin. Customized for your ski model We supply TÖDI ski skins customized for your ski model. Make sure you choose the right ski brand, model and length. These customized skins are available from CHF 230.00 and guarantee you a reliable and comfortable touring experience.

Leki Bold Lite S - The ideal beginner's alpine pole The Leki Bold Lite S is a high-quality alpine pole made of robust aluminum that is perfect for beginners and all-rounders. Whether for precise carving turns or short turns – this pole impresses with its stability and the comfortable Trigger S system, which offers quick click-in and maximum safety. Main features Construction: Fixed length with 16 mm tube diameter Material: Aluminum HTS 5.5 – durable and stable Grip: Trigger S SL with 2K Soft for a secure and comfortable grip Strap: Trigger Vario Strap, infinitely adjustable and available in sizes M-L-XL Tip: Ice Tip for optimum grip on ice and snow Cup: Cobra Alpin for versatile use Sizes Available in lengths from 110 to 135 cm (in 5 cm increments). The Leki Bold Lite S combines reliability, comfort and safety – perfect for beginners and skiers looking for versatile poles.

The HEAD Worldcup Rebels e-Race Pro 2026 is aimed at experienced skiers looking for maximum performance in medium radii. With its sporty construction and uncompromising equipment, it brings a real racing feeling to the piste – precise, smooth-running, and yet more versatile than a pure giant slalom ski. HEAD Worldcup Rebels e-Race Pro – Performance & control at the highest level EMC technology reduces disruptive vibrations, while wood core, Titanal belt and phenolic sidewalls ensure stability, grip and direct power transmission. The narrower shovel makes it more maneuverable and dynamic – ideal for ambitious riders who want to combine racing technology with everyday suitability. Product advantages Optimized for medium radii – precise & smooth-running Stable construction with wood core and Titanal reinforcement EMC technology for noticeably fewer vibrations Narrow shovel for agile handling WCR plate for maximum power transmission Racing character for ambitious experts Technical data TerrainPiste SpeedVery fast AbilityExperts Radius12.9 m (size 160) Length160 cm Ski shovel117 mm Ski center68 mm Ski tail102 mm Weight2315 g Camber100 % Rocker0 % / 0 % FAQ Who is the e-Race Pro suitable for? For sporty skiers and experts looking for racing performance in medium radii. What distinguishes it from the giant slalom ski? The e-Race Pro has a narrower shovel and is therefore more maneuverable and versatile than a classic giant slalom ski. Which technology ensures smooth running? The HEAD EMC technology reduces vibrations and ensures a smoother feel on the slope. How sporty is the ski tuned? It is uncompromisingly sporty, but offers more everyday usability than pure World Cup models. Which plate is installed? The ski is equipped with the WCR plate, which guarantees maximum power transmission.

The brand new Protector PR 13 GW binding with Full Heel Release (FHR) technology offers maximum safety thanks to constant release values for forward and, above all, backward turns, thus ensuring less strain on the knees and safer skiing. Thanks to the included Power Rail Base, the Protector PR 13 GW can be mounted on all skis. Thanks to the intelligent 180° heel release, horizontally and vertically, the load on the knee is significantly reduced, ensuring safer skiing. This leads to a significant reduction and mitigation of knee injuries. As the binding is based on our PowerRail technology, it works with all skis with a pre-assembled PR Base. The binding is also GripWalk compatible and can be used with Alpine and GripWalk ski boots. This binding innovation is for all piste skiers, whether young or old, beginner or advanced. In addition to the innovative Full Heel Release technology of the heel, the toe of the Protector binding offers all Tyrolia safety features, such as AFS, TRP toe system and Full Diagonal toe. Stand height: 33.5 mmDIN: 3.5 - 12

The Head RACEPLATE WCR Team in black/speed blue is the perfect binding plate for ambitious junior racers. Developed for use with Head and Tyrolia bindings from the Freeflex, Evo and JRS series, it guarantees powerful power transmission and precise control on the piste. Optimum performance for racing skis Compatible with: Head & Tyrolia Freeflex, Evo and JRS bindings For sole lengths: 231-322 mm Race-optimized setup: Ideal for young racers Color: Black / Speed Blue - sporty & striking High stability: Solid construction for maximum power transmission Developed for ambitious racers With the RACEPLATE WCR Team, up-and-coming athletes get the right basis for a professional setup - directly inspired by the World Cup. The plate provides increased stability, more edge pressure and optimum leverage. FAQ - Frequently asked questions about the RACEPLATE WCR Team Which bindings fit on the plate? All models in the Head Freeflex, Tyrolia Freeflex, Evo and JRS binding series are fully compatible. What boot sizes is the plate suitable for? The plate is designed for ski boots with sole lengths from 231 mm to 322 mm - ideal for children and teenagers in racing. Can I fit the plate myself? The mounting should be carried out by a specialist dealer, as exact positioning and compatibility with the binding are relevant to safety.

The Nordica Dobermann SLR DC is the first choice for skiers who love short, explosive turns and uncompromising precision. The combination of Double Core construction, Titanal layers and Pulse Elastomer Core ensures maximum power, damping and stability. With the new Race Plate Pro N, you will experience unparalleled power transmission and control – exactly what ambitious skiers are looking for on the slopes. Technologies at a glance Energy 2 TI Double Core Pulse elastomer layer for cushioning and smoothness Titanal layers for power, precision and power transmission Dynamic Race Shovel More agile ski tip thanks to special geometry Slightly rockered for easy turn initiation More control with less effort FDT Race Plate Pro N Two-piece zinc plate with bridge for maximum power Quick binding adjustment without tools High stability and direct power transmission Technical Data ConstructionPulse 2 TI Double Core Core / MaterialsPerformance Wood + Metal + Double Core + Sidewall + Carbon RockerFull Camber Factory base angle0.9° Factory side angle87.5° PlateFDT Race Plate Pro N BindingComp 13 FDT DIN4 – 13 TCX Waist (mm)119 – 69 – 103 Radius (m)11.5 Weight (pair)2880 g FAQ Who is the Dobermann SLR DC suitable for? For experienced skiers who love short, precise turns on groomed slopes and are looking for maximum control. How does it differ from the Multigara DC? The SLR DC is designed for explosive short turns, while the Multigara DC offers more versatility for long radii. Which binding is included? The Comp 13 FDT binding with DIN 4–13 is already included in the set. What are the factory edge angles? Base: 0.9° · Side: 87.5°. This gives you excellent edge grip and high precision. What waist and radius? Waist 119-69-103 mm, radius 11.5 m. Ideal for tight and dynamic turns on the piste.

The Look SPX 13 GW White + R22 Raceplate is a high-performance binding for ambitious skiers who demand maximum precision, control and safety. Thanks to the combination of Full Action toe piece and SPX heel system it impresses with direct power transmission, outstanding shock absorption and minimal risk of false releases - perfect for sporty skiing styles and high speeds. Advantages of the Look SPX 13 GW White + R22 Raceplate Full Action toe piece - ensures precise power transmission and multidirectional release SPX heel system - maximizes shock absorption and reduces false releases R22 Raceplate - offers more stability, control and more direct ski guidance GripWalk® compatible - suitable for ISO 5355 A & ISO 23223 A boot soles High DIN range - up to 13 for aggressive skiers and racing-oriented applications Robust construction - Aluminum-steel combination for durability and top performance Technical data DIN/ISO range 4 - 13 System R22 Raceplate with SPX heel unit Brake width 80 - 90 mm Compatibility GripWalk® (ISO 23223 A) & alpine soles (ISO 5355 A) Weight 1110 g per 1/2 pair Color White Performance & control at World Cup level The SPX 13 GW offers maximum support and precision. The Lange elastic spring travel and the robust R22 plate ensure dynamic power transmission and optimum ski control - whether on hard slopes or in competition. Ideal for skiers who want to take their performance to the next level. FAQ about the Look SPX 13 GW White + R22 Raceplate What type of skier is the SPX 13 GW suitable for? The binding is aimed at experienced and sporty skiers who are looking for precision, stability and safety at the highest level. What is the advantage of the R22 Raceplate? The R22 Raceplate ensures more direct power transmission and increases the reactivity of the ski, which is particularly advantageous for aggressive turns and high speeds. Is the binding compatible with GripWalk® soles? Yes, it is compatible with GripWalk® (ISO 23223 A) and alpine soles (ISO 5355 A) for adults. How does the SPX 13 differ from the NX series? The SPX series offers Lange elastic travel, more shock absorption and more precise power transmission - ideal for ambitious riders and racing.

The ATK crampons are the ideal companion for demanding ski tours when the ground is hard or icy. They are quick and easy to fit and offer reliable grip on steep slopes. Available in different widths - to suit your binding and ski width. Advantages of ATK crampons Precise fit - Available in widths from 70 to 135 mm Maximum grip - Ensures a secure grip on icy ground Lightweight & robust - Made from high quality aluminum Compatible - suitable for all current ATK bindings Sold in pairs - all prices refer to one pair Sustainable design & service ATK stands for Longevity, precision and sustainability. Every part of an ATK binding can be checked and replaced - from the crampons to the climbing aid. Spare parts are also available for older models to reduce waste and extend the life of your equipment. FAQ about ATK crampons How do I choose the right width? The width of the crampon should at least match the center width of your ski, ideally 2-4 mm wider. Do the crampons fit all ATK bindings? Yes, the crampons are compatible with all current ATK models. Adapters are available for older models. Are the crampons sold in pairs? Yes, all prices and order quantities refer to a pair of crampons. What material are the crampons made of? They are made of hardened aluminum - lightweight, durable and corrosion-resistant.

The Black Crows Mirus Cor 2026 takes your skiing to a new level. It combines freestyle playfulness with precise carving and invites you to dance creatively across the piste. Its long rocker and characteristic split tail give you maximum maneuverability for short, playful turns – on the piste and off-piste. Black Crows Mirus Cor 2026 – Creative, reactive and full of energy With 87 mm waist width, classic camber and an energetic flex, the Mirus Cor provides strong edge grip and a dynamic feeling in every turn. This ski is perfect for you if you want to combine technical precision with flow. The COR series stands for skiing fun, inspiration and an unmistakable design. Highlights 87 mm center width for quick edge changes 13 m radius for extremely reactive turns Double rocker with fishtail for maximum turning pleasure Classic camber for stability and direct power transmission Energetic flex with strong edge grip Robust semi-cap construction with ABS sidewalls Poplar wood core with fiberglass reinforcement Mono-Titanal in the center of the ski for dynamics and stability Model year 2026 Technical data Width87 mm Radius13 m RockerFront and rear rocker with fishtail CamberClassic medium camber FlexEnergetic, powerful, stable ConstructionSemi-cap with ABS sidewalls CorePoplar wood with fiberglass TitanalMono-Titanal in the center of the ski Mounting point-3.5 cm Drilling4.1 mm × 9 mm FAQ For which skiing style is the Mirus Cor intended? For creative skiers who want to combine carving with freestyle moves – on the piste and off-piste. Does the ski forgive mistakes? It is agile and very responsive, but remains stable thanks to classic camber – ideal for advanced skiers. Why does the ski have a split tail? The split tail improves control, pivot, and playfulness, especially for short turns and creative movements. Is the Mirus Cor suitable for deep snow? Thanks to its double rocker and 87 mm center width, it offers good float, but its focus is clearly on piste, sidehits, and creative all-mountain skiing.

The ATK Freeride Spacer Rear Brake (AL13) is a precisely developed accessory for touring and freeride bindings. Weighing just 29 grams, it ensures improved power transmission between boot and ski, increases stability and enables more direct control - especially at high speeds or when skiing aggressively off-piste. The spacer is compatible with all current RT EVO- and Freeraider EVO-models. Advantages of the ATK Freeride Spacer Rear Brake Optimized power transmission - Reduces vertical flex between boot and ski More precision - more direct feedback and maximum control on every descent Lightweight - only 29 g, without affecting the total weight of the binding Compatibility - suitable for RT 8 EVO, RT 10 EVO, RT 11 EVO, R 13 EVO and FR 15 EVO Robust aluminum design - Durable and resistant to high loads Technical data ModelFreeride Spacer Rear Brake (AL13) article numberAL13 weight29 g materialaluminum CompatibilityRT 8 EVO / RT 10 EVO / RT 11 EVO / R 13 EVO / FR 15 EVO Scope of delivery1 pair of spacers Field of applicationFreeride / Touring FAQ about the ATK Freeride Spacer Rear Brake What does the Freeride Spacer do for ATK bindings? It minimizes the distance between boot and ski in the heel area and thus ensures more direct power transmission and more stability. Which models is the spacer compatible with? The AL13 Spacer fits all RT EVO- and Freeraider EVO-models: RT 8, 10, 11 EVO / R 13 EVO / FR 15 EVO. How much does the spacer weigh? The set weighs only 29 grams - perfect for weight-conscious freeriders. How is the spacer fitted? It is mounted in the heel area between the binding and the ski and can be installed in a few simple steps.

The Pomoca glue tube 75 g is the quick and reliable solution for completely renewing the adhesive layer of your ski skins. Ideal if the adhesion is weakening or the skins have been subjected to heavy use. With just one application, you can restore a pair of skins to top condition. The all-temperature adhesive ensures a constant hold in a wide range of snow and temperature conditions. Whether it's cold powder snow or damp spring conditions – your skins will stick securely and evenly again. Pomoca glue tube 75 g – Glue renewal for ski skins Complete renewal: Enough for one pair of ski skins All-temperature adhesive: Reliable adhesion in all conditions Quick application: Easy to apply and effective Original Pomoca quality: Perfectly matched to Pomoca skins Ideal for repair & care: Extends the life of your skins Technical data ProductPomoca glue tube Contents75 g Range1 pair of ski skins Glue typeAll-temperature Area of applicationRenewing and repairing ski skins FAQ Which skins is the glue suitable for? The glue is suitable for all Pomoca ski skins and can also be used with other brands. Is one tube really enough for a pair of skins? Yes, the 75 g tube is designed for a complete recoating of a pair. Does the glue work in cold temperatures? Yes, the all-temperature adhesive offers reliable adhesion in both cold and warmer conditions.

Cramponfor additional grip in icy conditions. The crampon is available in different sizes and is compatible with every Dynafit binding. It can be attached to the binding very easily and quickly and guarantees additional grip and safety in icy conditions. Crampon Dynafit 110mm: Weight: 102g