Natural Skiwax Stick

The Holmenkol Ski Tour Wax Stick is a practical universal wax for touring skins and ski bases. The compact wax stick can be rubbed on directly and quickly ensures better gliding properties on ski tours – whether on the ascent or descent. The wax cares for touring skins particularly gently and at the same time improves the gliding properties of the ski base. This reduces the formation of clods and keeps the material performing for longer. Application is quick and easy, ideal for on the go during the tour. Holmenkol Ski Tour Wax Stick – Advantages Universal wax for touring skins and ski bases Improves gliding properties on the ascent and descent Gentle care for all types of touring skins Reduces clod formation in wet snow Quick and easy application by rubbing on Suitable for all types of snow and temperatures Environmentally friendly paper packaging Application Rub wax directly onto touring skin or ski base Rub in or spread lightly as required Ideal for quick application on the go Technical data ProductHolmenkol Ski Tour Wax Stick Contents50 g Area of applicationSki touring, touring skins, ski base Temperature rangeFor all types of snow and temperatures ApplicationRubbing onto skin or base PackagingEcological paper packaging FAQ about the Holmenkol Ski Tour Wax Stick What is the Ski Tour Wax Stick used for? The stick is applied to touring skins or ski bases to improve gliding properties and reduce clod formation. Can I use the wax at all temperatures? Yes, the Ski Tour Wax Stick is a universal wax and is suitable for all types of snow and temperature ranges. Is the wax also suitable for on the go? Yes, thanks to the compact stick shape, the wax can be applied quickly and easily directly on the tour.

The Holmenkol World Cup Finish Powder Red+ is the top layer in the race base. Fluorine-free, highly abrasion-resistant, and designed specifically for the area where many races are decided. Holmenkol World Cup Finish Powder Red+ - Finish for -1 to -6 degrees Fluorine-free high-performance finishing powder For fine to coarse snow as well as wet snow Snow temperatures ranging from -1 to -6 degrees Increases speed and acceleration Very high abrasion resistance, even over longer distances High dirt repellency Ironing temperature: 150 to 160 degrees 30 g can Red+ or Red The advantage lies in the temperature range: Red+ works from -1 to -6 degrees, while the standard Red works from -4 to -12 degrees. For snow just below freezing—as is typical in spring races or on artificial snow—go with the Red+. Yellow covers 0 to -4 degrees, and Blue covers -10 to -20 degrees. Here’s how to use it Sprinkle a thin layer onto the already waxed and brushed base, iron it on quickly at 150 to 160 degrees, let it cool, and brush it out with a horsehair and nylon brush. Use sparingly: 30 g is enough for many pairs. Frequently Asked Questions Does the powder replace the base wax?No. It is the final layer applied over a suitable glide wax—not a substitute for it. What kind of wax iron do I need?A digitally controlled iron with a thick plate. The temperature must remain stable between 150 and 160 degrees. Is it fluorine-free?Yes, completely fluorine-free and compliant with competition rules.

The Holmenkol Racing Black Bar Red is the all-rounder of the series. It covers the temperature range in which most races take place and features the improved, next-generation carbon matrix. Holmenkol Racing Black Bar Red—the mid-range option An enhanced version of the well-known FF World Cup Bars with a specially adapted carbon modification Measurably better speed and glide performance than its predecessor Tested by the World Cup team Improved mechanical properties and greater wear resistance Maximum water and dirt repellency Very high acceleration, top marks for glide performance and abrasion resistance Ironing temperature: 115 to 125 degrees Fluorine-free, 150 g bar When do you use Red Red is designed for snow temperatures ranging from -4 to -10 degrees and works well on fine to coarse as well as wet snow. If it gets warmer, Yellow (0 to -4 degrees) is the better choice; for really cold snow, Blue (-8 to -15 degrees) is recommended. If you only want to carry one bar in your case, go with Red. Here’s how to use it Clean the base, apply the wax by ironing at 115 to 125 degrees, let it cool, peel it off, and brush it out with a nylon and horsehair brush. Depending on the application thickness, a 150-g bar is enough for about 15 to 25 pairs of alpine skis. Frequently Asked Questions Is the wax fluorocarbon-free?Yes, the entire Racing Black Bar series is fluorine-free and complies with the regulations of international skiing federations. What’s the difference between these and the FF World Cup Bars?The matrix has been further developed with a specially adapted carbon modification for more speed and greater abrasion resistance. Is one bar enough for a season?Easily enough for one to two pairs of skis. For race teams, the wax is also available in a backshop format.

Impresses with its extreme abrasion resistance and wide range of applications. Excellently suited as transport wax. Ironing temperature 125~135 °C. Product advantages Holmenkol Betamix Red: BETAMIX World Cup Skiwax RED Highest quality 12 base and training wax based on hydrocarbon For all types of snow For snow temperatures from -4° to -14° C 150 gr

The Holmenkol World Cup Finish Speed Block Red is the finish for the start area. No waxing stand, no iron, no waiting: apply it, buff it in, give it a quick brush, and you’re off. That’s exactly what makes it so practical for everyday racing. Holmenkol World Cup Finish Speed Block Red—Speed without a waxing stand High-performance special polymer wax formula Powder technology developed for the World Cup, based on special waxes and polymers Extreme acceleration and top speed Very long-lasting with excellent coverage Highly abrasion-resistant due to the hardness of the materials For fresh snow or damp old and artificial snow Snow temperatures from -6 to -12 degrees 10 g cube in the box Where it really shines In the starting area, when conditions are different than expected just before the race. Apply, rub in with the cork, brush out briefly—it takes two minutes and requires no tools other than a cork and a brush. For basic preparation at home, iron-on wax remains the foundation. Which color is best? Red covers -6 to -12 degrees, Blue covers the cold range from -12 to -20 degrees. Measure the snow temperature, not the air temperature. Frequently Asked Questions Do I have to iron on the block?No, that’s exactly the point. Apply, seal, brush. How long does one application last?For the duration of a race. For a full day of training, an ironed-on finish is the better choice. Is 10 g enough?Yes, the product goes a long way. One cube is enough for many applications.

Impresses with its extreme abrasion resistance. Ironing temperature 115~125 °C. Product advantages Holmenkol Alphamix Yellow: Highest quality base, base and training wax based on hydrocarbon 150 gr For soft, new and fine-grained snow For snow temperatures from 0° to -4°C

Practical set of 2 with one bar each of Alphamix YELLOW and Betamix RED. Ironing temperature 115~145 °C. Product advantages Holmenkol Worldcup Mix Hot Yellow-Red: Highest quality base and training wax based on hydrocarbon For all types of snow For snow temperatures from 0° to -14°C 2x35 gr

The Holmenkol Racing Black Bar Yellow is the next evolution of the well-known FF World Cup Bars. The specially adapted carbon formulation makes a difference where it counts: more base speed, better glide, and a wax that lasts the entire race. Holmenkol Racing Black Bar Yellow—for warm conditions An enhanced version of the well-known FF World Cup Bars with a specially adapted carbon modification Measurably better speed and glide performance than its predecessor Tested by the World Cup team Improved mechanical properties and greater wear resistance Maximum water and dirt repellency Very high acceleration, top marks for glide performance and abrasion resistance Ironing temperature: 115 to 125 degrees Fluorine-free, 150 g bar When do you use Yellow Yellow covers snow temperatures from 0 to -4 degrees, meaning fine to coarse-grained as well as wet snow. If it gets colder, go with Red (-4 to -10 degrees) or Blue (-8 to -15 degrees). In borderline conditions, the snow is the deciding factor, not the air temperature: Always measure in the snow, not in the sun. Here’s how to use it Clean the base, apply the wax by ironing at 115 to 125 degrees, let it cool, peel it off, and brush it out with a nylon and horsehair brush. Depending on the application thickness, a 150-g bar is enough for about 15 to 25 pairs of alpine skis. Frequently Asked Questions Is the wax fluorocarbon-free?Yes, the entire Racing Black Bar series is fluorine-free and complies with the regulations of international skiing federations. Do I need to apply a top finish on top of it?Not necessarily. However, when used in combination with a World Cup Finish Powder or Speed Block, you’ll get even better results. How should I store the wax?In a cool, dry, and dark place. That way, it will remain ready for use for years.

The Holmenkol Beta Wax Set offers everything you need for professional ski wax care. It contains high-quality wax, a waxing iron, wax remover and brushes - perfect for demanding skiers. Betamix Red ski wax: High-quality hydrocarbon-based base and training wax, suitable for all types of snow. Ideal for snow temperatures from -4° to -14° C. (150g) Smart Waxer 230 V: Easily and precisely adjustable temperature via rotary knob, constant heat regulation thanks to extra-thick base plate. Temperature range from 50° to 160°C. Includes heat-resistant stand. Wax remover spray 250ml: Ideal for gently removing wax, grease, oil and resin from ski bases, clothing and hands. Easy to dose. BaseBrush Nylon: High-quality nylon brush for perfect finishing - Made in Germany. Plexi blade 4mm: For perfect wax removal and edge cleaning, manufactured by Ramser.High-quality box for safe storage of wax and tools The set is the ideal choice for skiers who value thorough ski maintenance and rely on high-quality materials.

The Holmenkol BaseBrush Nylon is a high-quality nylon brush that is especially suitable for polishing hot wax products. With its robust bristles, it ensures a perfect finish on ski or snowboard surfaces. Ideal for all disciplines. Dimensions: 125 x 70 mm Bristle length: 8 mm Made in Germany: High-quality workmanship for best results Area of application: All Discipline

The Holmenkol ALL-IN-ONE 2.0 mount is a compact, robust and versatile ski clamp that is suitable for all types of skis. The pressure- and tension-resistant aluminum body ensures maximum stability and durability. Thanks to the central clamping device with an opening width of up to 90 mm, you can securely fix a wide variety of skis. With its low weight and compact size, the mount is also a reliable companion on the go. The set includes two ski stopper holders and an adapter for snowboards and cross-country skis, which can be clamped directly onto the outer contact surfaces. Product features Versatile ski clamp for all ski types Sturdy aluminum body – pressure and tensile strength Clamping device opens up to 90 mm Lightweight and compact – ideal for on the go Incl. 2 ski stopper holders and adapter for snowboards & cross-country skis Product details BrandHolmenkol ModelALL-IN-ONE 2.0 MaterialPressure- and tension-resistant aluminum body Clamping deviceOpens up to 90 mm WeightLow Accessories2 ski stopper holders, adapter for snowboards & cross-country skis FAQ For which ski types is the mount suitable? The ALL-IN-ONE 2.0 mount is suitable for all types of skis, including alpine, freeride and touring skis. Can you also mount snowboards or cross-country skis? Yes, an adapter is included in the set that securely fixes snowboards and cross-country skis. How wide does the clamping device open? The central clamping device opens up to 90 mm and thus covers a wide variety of ski models. Is the mount suitable for mobile use? Yes. Thanks to its low weight and compact design, it is also ideal for travel or on-the-go service. What accessories are included in the set? Two ski stopper holders and an adapter for snowboards and cross-country skis.

Holmenkol SUPERPROPLUS WORLDCUP - The professional ski vise for all alpine skis The Holmenkol SUPERPROPLUS WORLDCUP is a first-class WorldCup ski clamp designed for all types of alpine skis, including racing carving, freeride freestyle and back-country alpine touring. With a robust center clamp that is 90mm wide and opens from 40mm to 100mm, this ski clamp is ideal for edge and base preparation. Made from a pressure and tension-resistant aluminum body, this ski clamp offers maximum stability and durability. The height-adjustable outer supports are infinitely variable from 90° to 60°, offering maximum flexibility for ski maintenance. The set is supplied with two ski stopper holders. Product details Material: pressure and tension-resistant aluminum body Clamping device: 90 mm wide, opens up to 100 mm Outer supports: Height-adjustable and infinitely variable from 90° to 60° Accessories: Incl. 2 ski stopper holders

Holmenkol Wax iron tray/holder Stable tray for wax irons made of aluminum with silicone protection. For mounting on the service table. Suitable for all tables with a tabletop thickness of up to 50 mm. Suitable for all waxing irons with a width of up to 110 mm. Heat-resistant up to 230°C.

Impresses with its extreme abrasion resistance. ironing temperature 135~145 °C Product advantages Holmenkol Ultramix Blue: Highest quality base and training wax based on hydrocarbon For cold, old and aggressive snow For snow temperatures from -8° to -20°C 150 gr

Practical set of 2 with one bar each of Alphamix YELLOW and Betamix RED. Ironing temperature 115~145 °C. Product advantages Holmenkol Worldcup Mix Hot Yellow-Red: Highest quality base and training wax based on hydrocarbon For all types of snow For snow temperatures from 0° to -14°C 2x35 gr

Impresses with its extreme abrasion resistance. Ironing temperature 115~125 °C. Product advantages Holmenkol Alphamix Yellow: Highest quality base, base and training wax based on hydrocarbon 150 gr For soft, new and fine-grained snow For snow temperatures from 0° to -4°C

Impresses with its extreme abrasion resistance and wide range of applications. Excellently suited as transport wax. Ironing temperature 125~135 °C. Product advantages Holmenkol Betamix Red: BETAMIX World Cup Skiwax RED Highest quality 12 base and training wax based on hydrocarbon For all types of snow For snow temperatures from -4° to -14° C 150 gr

The new liquid wax variant of the top seller Betamix now also in liquid form. Very easy to apply with a fleece or sponge and allow to soak in briefly. Brush out with a nylon or horsehair brush and you're done. The Holmenkol Betamix red liquid is a fluorine-free training wax for waxing alpine skis, cross-country skis and snowboards. Product advantages Holmenkol Betamix Red Liquid: Betamix RED Liquid New liquid wax variant of the top seller Betamix. For all types of snow For snow temperatures from -4° to -14°C Quick and easy application

The new liquid wax variant of the top seller Alphamix is now also available in liquid form. Very easy to apply with a fleece or sponge and allow to soak in briefly. Brush out with a nylon or horsehair brush and you're done. The Holmenkol Alphamix yellow liquid is a fluorine-free training wax for waxing alpine skis, cross-country skis and snowboards. Product advantages Holmenkol Alphamix YELLOW Liquid: Alphamix YELLOW Liquid New liquid wax variant of the top seller Alphamix. For all types of snow For snow temperatures from 0° to -4°C Quick and easy application

The new liquid wax variant of the top seller Ultramix now also in liquid form. Very easy to apply with a fleece or sponge and allow to soak in briefly. Brush out with a nylon or horsehair brush and you're done. The Holmenkol Betamix Blue liquid is a fluorine-free training wax for waxing alpine skis, cross-country skis and snowboards. Product advantages Holmenkol Ultramix BLUE Liquid: Ultramix BLUE Liquid New liquid wax variant of the top seller Ultramix. For all types of snow For snow temperatures from -8° to -20°C Quick and easy application