Product Information "Diamond file Icecut 600"
With the Icecut 600 diamond file, you can quickly resharpen your ski edges. This is handy when snow conditions change or you’re doing many training runs in a row and the edge needs a bit of bite in between. After filing, use it to polish the edge.
Vola Icecut 600 Diamond File
Polishing with the diamond stone removes particles and burrs left behind by the file after grinding. Vola offers the Icecut in grit sizes 200, 400, 600, and 1000. The 600 grit is considered an all-purpose stone. The 200 grit is significantly coarser and intended for nicks caused by contact with other stones, while the 1000 grit is the very fine final step.
Features of the Icecut 600
- √ Diamond file, 600 grit
- √ All-purpose grit in Vola’s Icecut series
- √ Removes burrs and particles after filing
- √ For quickly touching up the edges between runs
Using the Diamond File
- √ Clamp the ski onto the edge, with the binding facing you
- √ Wear gloves
- √ Place the stone on the base side against the edge and pull it toward you once along the entire length with light pressure
- √ Place the stone on the edge angle and position both against the side edge
- √ Four to five passes along the entire length
What is the 600-grit stone used for?
Vola describes the 600-grit stone as an all-around stone. It falls between the intermediate 400-grit and the very fine 1000-grit, which serves as the final step for a smooth finish.
Does the diamond file replace traditional filing?
It is intended for polishing and finishing. The stone removes burrs and particles left behind after filing.
How many passes do I need?
One pass is sufficient on the running surface. On the side edge, with the stone at an angle, Vola recommends four to five passes along the entire length.
| Area of application: | Alpine skiing, Snowboard |
|---|---|
| Color: | Black |
| Hazard pictogram: | GHS02, GHS07 |
| Hazard warnings: | EUH066, H222, H229, H304, H336, H412 |
| Manufacturer: | Vola Racing |
| Product type: | Ski wax + tools |
| Safety note: | Chemical declarations can be found in the specifications. |
| Signal word: | DANGER |
Sign In