Sidas Skiboot Traction Black

The Head replacement soles for Edge and Kaliber ski boots restore worn-out soles to standard condition: The set, consisting of two toe plates and two heel plates, replaces the worn sole parts so that the binding releases correctly again and the boot fits securely in the binding. No screws required—the existing ones are reused. Head Edge and Kaliber Base Plates: Replaceable Toe and Heel Plates Worn-out soles are the most common reason why a ski boot no longer fits properly into the binding or why the Z-value is no longer correct. With Head’s original replacement soles, the boot will be like new again in just a quarter of an hour. The set fits the Head Edge and Kaliber models from the 2023/24 through 2026/27 seasons, including the Kaliber Pro and BOA versions. You can replace the soles with a screwdriver; if you’re unsure, we’ll install the plates in our workshop and check the binding settings at the same time. Features in Detail √ 2 toe plates and 2 heel plates, Original Head √ Compatible with Head Edge (60/65 W to 130) and Kaliber, Kaliber Pro, 2023/24 through 2026/27 √ GripWalk and Alpine versions, BOA and BOA2 √ No screws required; the existing screws are reused √ Color: Black; one size fits all shoe sizes Compatible Models 2026/27 Season √ Kaliber Pro: 130 LV GW BOA2, 130 LV GW BOA, 120 LV GW BOA, 110 LV GW BOA2, 110 LV GW BOA, 105 W LV GW BOA, 100 LV BOA, 95 W LV GW BOA, 85 W LV BOA √ Caliber: 130 MV GW BOA2, 120 MV GW BOA, 120 MV GW, 110 MV GW BOA2, 110 MV GW BOA, 110 MV GW, 105 W MV GW BOA2, 100 MV, 95 W MV GW BOA, 95 W MV GW, 85 W MV √ Edge: 130 HV GW BOA, 130 HV GW, 120 HV GW BOA, 110 HV GW BOA, 110 HV GW, 105 W HV GW BOA, 100 HV BOA, 100 HV, 95 W HV GW BOA, 95 W HV GW, 90 HV, 85 W HV, 80 HV, 75 W HV, 65 W HV 2025/26 Season √ Caliber: 130 MV GW BOA2, 120 MV GW BOA, 120 MV GW, 110 MV GW BOA2, 110 MV GW BOA, 110 MV GW, 105 W MV GW BOA2, 100 MV, 95 W MV GW BOA, 95 W MV GW, 85 W MV √ Edge: 130 HV GW BOA, 130 HV GW, 120 HV GW BOA, 110 HV GW BOA, 110 HV GW, 105 W HV GW BOA, 100 HV BOA, 100 HV, 95 W HV GW BOA, 95 W HV GW, 90 HV, 85 W HV, 80 HV, 75 W HV, 65 W HV 2024/25 and 2023/24 seasons √ Edge: 130 HV GW, 120 HV GW, 110 HV GW, 105 W HV GW, 100 HV, 95 W HV GW, 10 R HV GW Not compatible: Raptor, Formula, Nexo, and Vector—separate Head sole kits are available for these models. Assembly Unscrew the old plates, clean the mounting surface, and tighten the new plates using the existing screws. Then check the sole height on the binding or have us check the binding for you. Will the replacement soles fit my Head ski boots? For all Head Edge and Kaliber models from 2023/24 through 2026/27; see the list above. For older models or the Raptor, Formula, and Nexo, please inquire. Are screws included? No, the existing screws are reused. If they’re damaged, we have replacement screws in the store. When do the soles need to be replaced? When the tread is worn down, the toe has become rounded, or the boot has too much play in the binding. Bindings with worn-out soles will no longer release properly. Can I replace the plates myself? Yes, with a screwdriver. It’s important to tighten the screws securely and check the binding afterward. Is there one size that fits all shoe sizes? Yes, the plates are the same for all sizes of the models listed.

With the Ski Boot Tractions Yellow you can walk safely and comfortably in your ski boots. Their beveled shape at the ends makes it easier for the foot to roll, while the asymmetrical groove profile guarantees safe walking on snow. Flexible and resistant rubber. Internal structure for a better grip on your shoes. One size fits all Makes walking with your ski boots easier Protects the outsole of your boots Size adjustment: Determine the length in mm of your ski boots. Adjust the Ski Boot Tractions to the appropriate size (round down). The tip of the arrow indicates the selected size. Screw on using a Phillips screwdriver. Fastening to the boot: Put the Ski Boot Traction on by first attaching it to the front of the boot, then pulling it back and adjusting it at the heel.

With the Ski Boot Tractions Green you can walk safely and comfortably in your ski boots. Their beveled shape at the ends makes it easier for the foot to roll, while the asymmetrical groove profile guarantees safe walking on snow. Flexible and resistant rubber. Internal structure for a better grip on your shoes. One size fits all Makes walking with your ski boots easier Protects the outsole of your boots Size adjustment: Determine the length in mm of your ski boots. Adjust the Ski Boot Tractions to the appropriate size (round down). The tip of the arrow indicates the selected size. Screw on using a Phillips screwdriver. Fastening to the boot: Put the Ski Boot Traction on by first attaching it to the front of the boot, then pulling it back and adjusting it at the heel.

5mm Sole Lifter Set Black for Head Raptor WCR Grip shell including screws. Please note that the shell must be reworked if you have not yet mounted one and keep the ISO standard for the binding.Scope of delivery Head WCR SET 1 PR HEEL/TOE TAP GRIP 5 MM 5mm soles for a pair of ski boots All screws included

The Salomon S/Series Alpine Pads are replacement soles for your Salomon ski boots. They ensure optimum grip and safety on the slopes by compensating for the wear of the original soles and ensuring compatibility with standard alpine bindings (ISO 5355). Compatibility Salomon S/Pro Salomon S/Max Salomon S/Max 65 Salomon S/Race 65 Salomon S/Race 70 Product details Set consisting of front and rear soles Complies with the ISO 5355 standard for alpine bindings Easy replacement for extended service life of your ski boots Made from robust plastic for a long service life Please note These pads are only compatible with the models listed above. Please check the model designation of your ski boots before purchasing to ensure the correct fit.

Grip Pads are the screw-on sole plates at the toe and heel of your ski boot. They are a wear part: if you walk a lot, they wear down, and once the sole is worn out, the binding will no longer release properly. This model complies with the Alpine standard and fits the Hawx Magna and Nexus model series. Atomic Alpine-standard grip pads for Hawx Magna and Nexus The alpine standard ISO 5355 specifies a flat, hard sole with defined dimensions. Classic alpine bindings are designed precisely for this. If you switch from a GripWalk sole to an alpine sole—or vice versa—the binding’s behavior will change. That’s why a new adjustment and release test are required after every sole change. That’s why it’s worth making the switch √ Compatible with Atomic, Hawx Magna, and Nexus √ Worn-out soles alter the binding’s release values √ The plates are bolted on and can be replaced individually √ Significantly cheaper than a new ski boot √ After the replacement, we’ll re-adjust the binding Before you order Base plates are not universal. These are designed for the Hawx Magna and Nexus. If in doubt, bring the boot in—that’s the safest bet. Which Atomic models are these Grip Pads designed for? For the Hawx Magna and Nexus series, which meet the alpine standard. Other Atomic series require a different version, and even within a single series, the size range determines the specific model. Let us know your Mondopoint size, and we’ll clarify this before you place your order. How can I tell if the base is worn out? There are wear indicators on the toe and heel. If the edges are worn down or the height is visibly reduced, the plate needs to be replaced. We’ll check this during service. What’s the difference between Alpine and GripWalk? The alpine standard ISO 5355 specifies a flat, hard sole. GripWalk soles, as defined by ISO 23223, are rounded and treaded to improve walking performance. GripWalk soles may only be used in bindings approved for this purpose. Can I install the plates myself? The screws are accessible, but the torque setting and subsequent binding adjustment should be done at a service center. Without a release test, you’re taking a gamble.

The Dalbello sole plates Heel & Toe Alpin are replacement soles for various Dalbello ski boot models. They ensure optimum grip and precise power transmission between boot and binding. The set consists of heel and toe plates and is compatible with several Dalbello models. Compatibility & fit The sole plates are suitable for the following models: BOSS IL Moro RAMPA JAKK JR 2 (from size 225 mm) Product details Set: 1 pair (heel & toe plate incl. screws) Size: 225-325 mm Standard: Alpine ISO 5355 Use: Spare part to restore binding compatibility Material: High-quality, abrasion-resistant plastic for a long service life Fitting instructions Assembly should be carried out by a specialist dealer or service technician to ensure correct positioning and safe functioning of the ski boots. A binding adjustment check is recommended after replacement. FAQ Do the sole plates also fit GripWalk ski boots? No, these sole plates comply with the Alpine standard (ISO 5355) and are not compatible with GripWalk bindings. Can I replace just one heel plate? Yes, it is possible, but it is recommended to replace both plates at the same time in order to maintain a consistent feel. How do I know if my soles need replacing? If the contact surfaces are worn or uneven, they should be replaced to ensure safety in the binding.

The Dalbello Heel & Toe Alpine sole plates are high-quality spare parts for ski boots from the DS, Veloce, Panterra, JR 4, FXR and Cabrio. They ensure the optimum connection between ski boot and binding and guarantee precise power transmission on the piste. Compatibility & area of application These replacement soles are suitable for ski boots with a size from 225-345 mm suitable. They comply with the Alpine standard ISO 5355 and are intended exclusively for use with alpine bindings. Compatible models Dalbello DS Dalbello Veloce Dalbello Panterra Dalbello JR 4 Dalbello FXR Dalbello Convertible Product details Set: 1 pair (heel and toe plates) Size: 225-345 mm Standard: Alpine ISO 5355 Material: Durable, abrasion-resistant plastic Usage: Spare part to restore Alpine binding compatibility Fitting instructions The sole plates should be fitted by a specialist dealer or service technician to ensure the correct fit and function. After replacement, a binding check is recommended to verify safety. FAQ Can I use these sole plates for GripWalk bindings? No, these soles comply with the Alpine standard (ISO 5355) and are not suitable for GripWalk bindings. How do I know if I need new sole plates? If the contact surfaces are worn, uneven or damaged, the sole plates should be replaced to ensure safety and optimum power transmission. Can I replace just the heel or toe plate? It is possible, but it is recommended to always replace both plates in the set to maintain a consistent feel.

The Nordica HF / Cruise / Speedmachine Jr 5355 Xtragrip Soles are original replacement sole plates for ski boots with Alpine standard ISO 5355. They are suitable for all HF, Cruise, Dobermann Jr and Speedmachine Jr models and once again ensure a secure stance, clean release values and a standard-compliant fit in the binding. The set consists of forefoot and heel plates including mounting material. Ideal if the original soles are worn out or the functionality of the ski boots needs to be fully restored. Original Nordica spare part: Perfect fit for HF, Cruise, Dobermann Jr and Speedmachine J ISO 5355 standard: For classic alpine bindings without GripWalk Complete set: Forefoot and heel plates including mounting material Xtragrip design: Secure footing when walking Longer service life: Ski boots fully ready for use again Technical data ProductNordica HF / Cruise / Speedmachine Jr 5355 Xtragrip Soles Item number08502200000 StandardISO 5355 Alpine Standard Compatible modelsHF, Cruise, Dobermann Jr, Speedmachine Jr Scope of delivery2x forefoot plates, 2x heel plates, mounting material ColorNeutral Seasons2019/2020 to 2026/2027FAQ

The Atomic CANTABLE DC Grip Pad 25–33.5 B are original replacement soles for Atomic Hawx ski boots from model year 2022 onward. They comply with the classic alpine standard ISO 5355 and are designed without GripWalk – ideal if you want to retrofit your ski boots to meet the standard for conventional alpine bindings. Worn-out ski boot soles affect stance, control, and the binding’s release performance. With these original Atomic soles, you restore the full functionality and safety of your Hawx ski boots. Atomic Cantable DC Grip Pad – ISO 5355 Alpine Sole Original Atomic replacement part: Perfect fit for Atomic Hawx models Without GripWalk: Classic alpine sole according to ISO 5355 Secure footing: Reliable power transfer in the binding Compatibility: For Atomic Hawx ski boots from season 2022 Size range: MP 25.0 to 33.5 Technical data Product1 pair Atomic CANTABLE DC Grip Pad incl. screws StandardISO 5355 alpine standard DesignWithout GripWalk Size rangeMP 25.0 – 33.5 Compatible modelsAtomic Hawx from model year 2022 ApplicationAlpine skiing FAQ Are these soles GripWalk compatible? No, these soles are deliberately designed without GripWalk and comply with the ISO 5355 alpine standard. Which ski boots do the soles fit? They fit Atomic Hawx ski boots from model year 2022 in size range MP 25.0 to 33.5. Why should I replace ski boot soles? Worn soles affect stance, safety, and the correct release behavior of the binding. Can I fit the soles myself? Installation is possible, however we recommend installation by a specialist dealer to ensure correct binding settings.