Atomic Hawx Magna Nexus AMT Alpine Standard Grip Pads
CHF 35.00*
Available immediately
Delivery time: 1-3 days
Product Information "Atomic Hawx Magna Nexus AMT Alpine Standard Grip Pads"
Grip Pads are the screw-on sole plates at the toe and heel of your ski boot. They are a wear part: if you walk a lot, they wear down, and once the sole is worn out, the binding will no longer release properly. This model complies with the Alpine standard and fits the Hawx Magna and Nexus model series.
Atomic Alpine-standard grip pads for Hawx Magna and Nexus
The alpine standard ISO 5355 specifies a flat, hard sole with defined dimensions. Classic alpine bindings are designed precisely for this. If you switch from a GripWalk sole to an alpine sole—or vice versa—the binding’s behavior will change. That’s why a new adjustment and release test are required after every sole change.
That’s why it’s worth making the switch
- √ Compatible with Atomic, Hawx Magna, and Nexus
- √ Worn-out soles alter the binding’s release values
- √ The plates are bolted on and can be replaced individually
- √ Significantly cheaper than a new ski boot
- √ After the replacement, we’ll re-adjust the binding
Before you order
Base plates are not universal. These are designed for the Hawx Magna and Nexus. If in doubt, bring the boot in—that’s the safest bet.
Which Atomic models are these Grip Pads designed for?
For the Hawx Magna and Nexus series, which meet the alpine standard. Other Atomic series require a different version, and even within a single series, the size range determines the specific model. Let us know your Mondopoint size, and we’ll clarify this before you place your order.
How can I tell if the base is worn out?
There are wear indicators on the toe and heel. If the edges are worn down or the height is visibly reduced, the plate needs to be replaced. We’ll check this during service.
What’s the difference between Alpine and GripWalk?
The alpine standard ISO 5355 specifies a flat, hard sole. GripWalk soles, as defined by ISO 23223, are rounded and treaded to improve walking performance. GripWalk soles may only be used in bindings approved for this purpose.
Can I install the plates myself?
The screws are accessible, but the torque setting and subsequent binding adjustment should be done at a service center. Without a release test, you’re taking a gamble.
| Color: | Black |
|---|---|
| Exact color name: | Black |
| Manufacturer: | Atomic |
| Product type: | Soles |
| Target group: | Unisex |
| Year: | 2027 |
Sign In
The Atomic CANTABLE DC Grip Pad 25–33.5 B are original replacement soles for Atomic Hawx ski boots from model year 2022 onward. They comply with the classic alpine standard ISO 5355 and are designed without GripWalk – ideal if you want to retrofit your ski boots to meet the standard for conventional alpine bindings. Worn-out ski boot soles affect stance, control, and the binding’s release performance. With these original Atomic soles, you restore the full functionality and safety of your Hawx ski boots. Atomic Cantable DC Grip Pad – ISO 5355 Alpine Sole Original Atomic replacement part: Perfect fit for Atomic Hawx models Without GripWalk: Classic alpine sole according to ISO 5355 Secure footing: Reliable power transfer in the binding Compatibility: For Atomic Hawx ski boots from season 2022 Size range: MP 25.0 to 33.5 Technical data Product1 pair Atomic CANTABLE DC Grip Pad incl. screws StandardISO 5355 alpine standard DesignWithout GripWalk Size rangeMP 25.0 – 33.5 Compatible modelsAtomic Hawx from model year 2022 ApplicationAlpine skiing FAQ Are these soles GripWalk compatible? No, these soles are deliberately designed without GripWalk and comply with the ISO 5355 alpine standard. Which ski boots do the soles fit? They fit Atomic Hawx ski boots from model year 2022 in size range MP 25.0 to 33.5. Why should I replace ski boot soles? Worn soles affect stance, safety, and the correct release behavior of the binding. Can I fit the soles myself? Installation is possible, however we recommend installation by a specialist dealer to ensure correct binding settings.
In stock now, delivery time: 1-3 days
The Dalbello sole plates Heel & Toe Alpin are replacement soles for various Dalbello ski boot models. They ensure optimum grip and precise power transmission between boot and binding. The set consists of heel and toe plates and is compatible with several Dalbello models. Compatibility & fit The sole plates are suitable for the following models: BOSS IL Moro RAMPA JAKK JR 2 (from size 225 mm) Product details Set: 1 pair (heel & toe plate incl. screws) Size: 225-325 mm Standard: Alpine ISO 5355 Use: Spare part to restore binding compatibility Material: High-quality, abrasion-resistant plastic for a long service life Fitting instructions Assembly should be carried out by a specialist dealer or service technician to ensure correct positioning and safe functioning of the ski boots. A binding adjustment check is recommended after replacement. FAQ Do the sole plates also fit GripWalk ski boots? No, these sole plates comply with the Alpine standard (ISO 5355) and are not compatible with GripWalk bindings. Can I replace just one heel plate? Yes, it is possible, but it is recommended to replace both plates at the same time in order to maintain a consistent feel. How do I know if my soles need replacing? If the contact surfaces are worn or uneven, they should be replaced to ensure safety in the binding.
In stock now, delivery time: 1-3 days
The Dalbello Heel & Toe Alpine sole plates are high-quality spare parts for ski boots from the DS, Veloce, Panterra, JR 4, FXR and Cabrio. They ensure the optimum connection between ski boot and binding and guarantee precise power transmission on the piste. Compatibility & area of application These replacement soles are suitable for ski boots with a size from 225-345 mm suitable. They comply with the Alpine standard ISO 5355 and are intended exclusively for use with alpine bindings. Compatible models Dalbello DS Dalbello Veloce Dalbello Panterra Dalbello JR 4 Dalbello FXR Dalbello Convertible Product details Set: 1 pair (heel and toe plates) Size: 225-345 mm Standard: Alpine ISO 5355 Material: Durable, abrasion-resistant plastic Usage: Spare part to restore Alpine binding compatibility Fitting instructions The sole plates should be fitted by a specialist dealer or service technician to ensure the correct fit and function. After replacement, a binding check is recommended to verify safety. FAQ Can I use these sole plates for GripWalk bindings? No, these soles comply with the Alpine standard (ISO 5355) and are not suitable for GripWalk bindings. How do I know if I need new sole plates? If the contact surfaces are worn, uneven or damaged, the sole plates should be replaced to ensure safety and optimum power transmission. Can I replace just the heel or toe plate? It is possible, but it is recommended to always replace both plates in the set to maintain a consistent feel.
In stock now, delivery time: 1-3 days
The Nordica HF / Cruise / Speedmachine Jr 5355 Xtragrip Soles are original replacement sole plates for ski boots with Alpine standard ISO 5355. They are suitable for all HF, Cruise, Dobermann Jr and Speedmachine Jr models and once again ensure a secure stance, clean release values and a standard-compliant fit in the binding. The set consists of forefoot and heel plates including mounting material. Ideal if the original soles are worn out or the functionality of the ski boots needs to be fully restored. Original Nordica spare part: Perfect fit for HF, Cruise, Dobermann Jr and Speedmachine J ISO 5355 standard: For classic alpine bindings without GripWalk Complete set: Forefoot and heel plates including mounting material Xtragrip design: Secure footing when walking Longer service life: Ski boots fully ready for use again Technical data ProductNordica HF / Cruise / Speedmachine Jr 5355 Xtragrip Soles Item number08502200000 StandardISO 5355 Alpine Standard Compatible modelsHF, Cruise, Dobermann Jr, Speedmachine Jr Scope of delivery2x forefoot plates, 2x heel plates, mounting material ColorNeutral Seasons2019/2020 to 2026/2027FAQ
In stock now, delivery time: 1-3 days
5mm Sole Lifter Set Black for Head Raptor WCR Grip shell including screws. Please note that the shell must be reworked if you have not yet mounted one and keep the ISO standard for the binding.Scope of delivery Head WCR SET 1 PR HEEL/TOE TAP GRIP 5 MM 5mm soles for a pair of ski boots All screws included
In stock now, delivery time: 1-3 days
With the Tecnica Mach DIN Dual Density Sole Kit (LV+MV+HV) you can replace worn ski boot soles easily and reliably. The ISO 5355 sole kit is suitable for Mach1, Mach Sport and Cochise models – with or without DYN. Tecnica Mach DIN Dual Density Sole Kit – ISO 5355 replacement soles Worn soles impair the safe function of your binding. With this original Dual Density Sole Kit, you can bring your ski boots back to DIN standard according to ISO 5355. The dual-density construction combines stability with durability and ensures precise grip in alpine bindings. Suitable for LV, MV and HV variants. Compatible models Mach1 Mach Sport Cochise Models with or without DYN Compatible seasons 2017 / 2018 2018 / 2019 2019 / 2020 2020 / 2021 2021 / 2022 2022 / 2023 2023 / 2024 2024 / 2025 2025 / 2026 2026 / 2027 Product details Standard: ISO 5355 (Alpine DIN) Dual Density Construction Suitable for LV, MV and HV Original Tecnica spare part FAQ What do I need the sole kit for? For replacing worn ISO 5355 alpine soles on compatible Tecnica ski boots. Is the kit suitable for GripWalk? No, these are ISO 5355 DIN alpine soles. Does it fit all Mach models? It is suitable for Mach1, Mach Sport and Cochise models of the mentioned seasons. Can I change the soles myself? Replacement is generally possible, but we recommend installation by a specialist dealer.
In stock now, delivery time: 1-3 days
With the Nordica HF GripWalk Soles, you can replace worn ski boot soles and improve both comfort and safety when walking. The GripWalk compatible soles offer better grip and higher traction on slippery and icy surfaces. Nordica HF GripWalk Soles – more grip and comfort when walking Especially on slippery paths around the valley station or when walking over ice, safe soles are crucial. The original Nordica GripWalk soles provide stable support and a noticeably more comfortable roll. The soles comply with the GripWalk / ISO 9523 standard and are easy to replace. This keeps your ski boots safely compatible with GripWalk bindings while also providing more comfort when walking. Compatible ski boots Nordica HF series (102 mm last width) Nordica The Cruise Nordica Speedmachine J Nordica Dobermann Jr Important note Not compatible with Nordica HF Pro 130 GW and Speedmachine Product details GripWalk compatible Standard: ISO 9523 Better traction on ice and snow More comfort when walking Replaceable original soles Scope of delivery: toe and heel plates FAQ What are the advantages of GripWalk soles? GripWalk soles improve walking comfort and provide significantly more grip on slippery or icy surfaces. For which Nordica ski boots are the soles suitable? They fit models of the Nordica HF series with 102 mm last width as well as The Cruise, Speedmachine J and Dobermann Jr. Is the Nordica HF Pro 130 compatible? No, this model is excluded from compatibility. What is included in the scope of delivery? The set includes toe and heel plates for replacing ski boot soles.
In stock now, delivery time: 1-3 days
With the Nordica Machine GripWalk soles, you can quickly and reliably replace worn-out sole plates on your ski boots. The set consists of forefoot and heel plates in the GripWalk design and fits many Nordica models. If your soles are worn from walking on asphalt or stones, this replacement set ensures a secure hold in the binding and greater comfort when walking. Nordica Machine GripWalk soles – perfectly fitting replacement for Nordica ski boots The Nordica Machine GripWalk soles have been specially developed for Promachine, Speedmachine and Sportmachine ski boots. The GripWalk soles provide better traction when walking and at the same time a precise connection to the binding with compatible GripWalk bindings. Advantages of the Nordica replacement sole plates Replacement set with forefoot and heel plates GripWalk standard for better walking comfort More traction on slippery surfaces Compatible with GripWalk bindings Ensures secure binding function Suitable for many Nordica Machine models Color: Black / White Compatible ski boot models Nordica Promachine Nordica Speedmachine Nordica Sportmachine Compatible seasonal models 2016 / 2017 2017 / 2018 2018 / 2019 2019 / 2020 2020 / 2021 2021 / 2022 2022 / 2023 2023 / 2024 2024 / 2025 2025 / 2026 Product details Product: Nordica Machine GripWalk soles Type: Replacement sole plates Standard: GripWalk Set: forefoot and heel plates FAQ When should you replace ski boot soles? If the soles are heavily worn by walking on asphalt or stones, the binding function can be impaired. Replacing them ensures a secure grip again. Are GripWalk soles compatible with all bindings? No. GripWalk soles only work with bindings that are explicitly GripWalk compatible. Which Nordica models fit these soles? The soles fit many Nordica Promachine, Speedmachine and Sportmachine ski boots. What is the advantage of GripWalk soles? GripWalk soles offer more comfort when walking and better grip on slippery surfaces.
In stock now, delivery time: 1-3 days
With the Tecnica Cochise DYN / Nordica Strider DYN PU Alpine soles (ISO 5355), you can convert your ski boots to the classic alpine standard. The sole plates for forefoot and heel offer you maximum compatibility with classic alpine bindings. Specially developed for models with Dynafit inserts, these robust PU soles ensure reliable power transmission and precise control on the slopes. Ideal if you also want to use your freeride or touring ski boots in a classic alpine setup. Tecnica / Nordica Alpine soles – Your advantages Alpine soles according to ISO 5355 standard Compatible with classic alpine bindings Robust PU construction for high durability Precise power transmission to the ski Easy replacement of forefoot and heel plates Compatibility Tecnica Cochise DYN (with Dynafit inserts) Nordica Strider DYN (with Dynafit inserts) Area of use Piste with classic alpine bindings Conversion from touring/freeride boots to Alpine setup Technical data ProductPU Alpine sole plate set StandardISO 5355 (Alpine) ColorGraphite / Black CompatibilityCochise DYN / Strider DYN Scope of deliveryForefoot and heel plates FAQ about the Alpine sole plates When do I need Alpine soles? If you want to use your ski boots with classic alpine bindings, you need ISO 5355 soles. Are the soles compatible with GripWalk? No, these soles correspond to the classic alpine standard and are not intended for GripWalk bindings. Is assembly easy? Yes, the soles can be replaced in a few simple steps.
In stock now, delivery time: 1-3 days
The Salomon S/Series Alpine Pads are replacement soles for your Salomon ski boots. They ensure optimum grip and safety on the slopes by compensating for the wear of the original soles and ensuring compatibility with standard alpine bindings (ISO 5355). Compatibility Salomon S/Pro Salomon S/Max Salomon S/Max 65 Salomon S/Race 65 Salomon S/Race 70 Product details Set consisting of front and rear soles Complies with the ISO 5355 standard for alpine bindings Easy replacement for extended service life of your ski boots Made from robust plastic for a long service life Please note These pads are only compatible with the models listed above. Please check the model designation of your ski boots before purchasing to ensure the correct fit.
In stock now, delivery time: 1-3 days
