Marker Duke PT 12 125mm

The lightweight Dynafit Superlite Brake 105mm, retrofittable ski stopper is compatible with the Superlite 175 and 150 bindings.The Superlite ski stopper is very easy to retrofit.Important: After fitting the ski stopper, the release values of the binding must be checked by a specialist dealer using an appropriate measuring device and readjusted if necessary. The settings depend not only on the type of binding and boot, but also on additional components such as ski stoppers. Assembly and adjustment by an unauthorized person is at your own risk and will invalidate the warranty. Improper adjustment can increase the risk of injury.

With its introduction, the innovative Kingpin redefines the performance standard for alpine touring bindings. The toe piece and heel piece are the result of years of development work: very easy to use, thanks to the wide drill pattern and XXL Power Transmitter with unusually high power transmission and simply impressive walking comfort (incl. 0°, 7°, 13° climbing aid). The current Kingpin 13 with carbon lever unit now carries the lighter toe piece of the Alpinist with only two springs, which further reduces the weight. Release functionality and downhill performance are still at the highest level. KINGPIN FERSE The revolutionary heel construction for PinTech bindings with widely spaced sole contact points provides loss-free and very direct power transmission, which is normally only known from alpine bindings. The Kingpin also offers unprecedented advantages in terms of safety. CLIMBING AID (KINGPIN) All good climbing aids have one thing in common: they can be operated by feel in any situation, even when you don't have them in view. Ease of use is a basic requirement and reduced effort is not a shame. The Kingpin also impresses with its integrated climbing aid with a choice of 7° and 13°, which can be easily operated with the plate of the ski pole. And because the stirrup is located in the upper third of the heel, it can be reached with any plate shape or the tip of the pole. KINGPIN TOE PIECE The Pintech design of the KingPin toe piece enables ergonomic rolling of the foot and the most direct ski connection. Six steel springs ensure optimum energy absorption up to a Z-value of 13. Fixed stops guarantee comfortable entry in all conditions.

The Marker Duke PT 12 (DIN 4-12) also combines the performance of a jester with the climbing comfort of a pin binding. The latest generation of the even lighter Hollow Linkage heel at the rear and the completely newly developed Ride & Hike Toe at the front: the upper part of the toe piece is folded forward to expose the pin binding. To save moving weight on the ski, the front upper section can also be removed and stowed in the rucksack. The multifunctional Lock & Walk unit automatically locks the brake and offers a 10° climbing aid. Before setting off, the toe piece is simply put back on or folded down, whereby it automatically locks fourfold and activates the function of a classic toe piece. With a standing height of just 24 mm, direct power transmission and fast edge changes are a matter of course. Thanks to Sole.ID, all Duke PTs are compatible with alpine, touring and GripWalk soles. Product features Marker Duke PT 12 100mm: Category: Hardcore Freeride Ride & Hike Brake width: 100 mm, 125 mm Z-value: 4.0 - 12.0 Boot type: Adult, standard Alpine, GripWalk Adult, Touring Boots Recommended rider weight: up to 120 kg Stand height without ski: 24 mm Toe piece: Ride & Hike Automatic heel: Hollow Linkage 2 Heel adjustment range: 60 mm Walking modes: 0°, 10° Weight: Uphill 850 g / downhill: 1150 g AFD skid plate: Stainless steel

Robust speed touring binding with minimal weight and maximum reliability for alpine challenges. The binding comes with stopper and adjustment travel. Replacement suspension fork is available separately.The Superlite 175+ impresses with minimal weight and maximum reliability as a robust speed binding for demanding alpine tours.When the going gets tough on the mountain, nothing can go wrong: You can rely 100% on the strong Superlite 175+ at all times and still be light, fast and efficient on the mountain. On the ascent, you can choose between two walking modes (half-step and climbing aid) for additional comfort. On the descent, the Superlite 175+ impresses with very good power transmission to the ski. The release values are fully adjustable laterally from DIN 5-12. The vertical release is fixed, but can be adjusted using a separately available exchangeable spring fork. The Superlite 175+ is equipped with a ski stopper as standard and weighs a light 319 grams in this version.The Superlite 175+ is fitted with an adjustment plate that allows a heel adjustment range of 20 mm to adapt to different sole lengths. Crampons can be quickly and easily attached for use in icy or slippery conditions.Like all DYNAFIT bindings, the Superlite 175+ is developed and manufactured in Germany and comes with the DYNAFIT Lifetime Guarantee.

The lightweight Dynafit Superlite Brake 75mm, retrofittable ski stopper is compatible with the Superlite 175 and 150 bindings.The Superlite ski stopper is very easy to retrofit.Important: After fitting the ski stopper, the release values of the binding must be checked by a specialist dealer using an appropriate measuring device and readjusted if necessary. The settings depend not only on the type of binding and boot, but also on additional components such as ski stoppers. Assembly and adjustment by an unauthorized person is at your own risk and will invalidate the warranty. Improper adjustment can increase the risk of injury.

The lightweight Dynafit Superlite Brake 90mm, retrofittable ski stopper is compatible with the Superlite 175 and 150 bindings.The Superlite ski stopper is very easy to retrofit.Important: After fitting the ski stopper, the release values of the binding must be checked by a specialist dealer using an appropriate measuring device and readjusted if necessary. The settings depend not only on the type of binding and boot, but also on additional components such as ski stoppers. Assembly and adjustment by an unauthorized person is at your own risk and will invalidate the warranty. Improper adjustment can increase the risk of injury.

The ultra-light and resilient touring pin binding for high alpine challenges, equipped with a Z-value up to 12. The ultra-light pin binding (245 g without brake) offers active length compensation during ski flex and impressive power transmission on the descent thanks to the 38 mm wide drill pattern. The carbon-reinforced and therefore very stiff toe piece is equipped with anti-icing pads and integrated elastomers for easy entry. The heel offers an ascent aid with 0°, 5° and 9° angles and can be quickly and easily adjusted between ascent and descent mode. Particularly practical: once fitted, the Alpinist has a heel adjustment range of +/-7.5mm to adapt to different sole lengths! Product features Marker Alpinist 12: Category: Alpine Touring Brake width: optional (90 or 105mm) Z-value: 6.0 - 12.0 Boot type: Touring boots Recommended rider weight: max. 110 kg Stand height without ski: 18 mm Toe: Pin Technology Toe Automatic heel: ALPINSIT heel Heel adjustment range: 15 mm Walking modes: 0°, 5°, 9° Weight with brake: 245 g

Robust speed touring binding with minimal weight and maximum reliability for alpine challenges. The Dynafit Superlite 175 - Z12 Black/Yellow 105mm binding comes with stopper and adjustment travel. Replacement suspension fork is available separately.The Superlite 175+ impresses with minimal weight and maximum reliability as a robust speed binding for demanding alpine tours.When the going gets tough on the mountain, nothing can go wrong: You can rely 100% on the strong Superlite 175+ at all times and still be light, fast and efficient on the mountain. On the ascent, you can choose between two walking modes (half-step and climbing aid) for additional comfort. On the descent, the Superlite 175+ impresses with very good power transmission to the ski. The release values are fully adjustable laterally from DIN 5-12. The vertical release is fixed, but can be adjusted using a separately available exchangeable spring fork. The Superlite 175+ is equipped with a ski stopper as standard and weighs a light 319 grams in this version.The Superlite 175+ is fitted with an adjustment plate that allows a heel adjustment range of 20 mm to adapt to different sole lengths. Crampons can be quickly and easily attached for use in icy or slippery conditions.Like all DYNAFIT bindings, the Superlite 175+ is developed and manufactured in Germany and comes with the DYNAFIT Lifetime Guarantee.

The ATK RT 11 EVO Black combines maximum performance with minimum weight. With only 280 g per unit this touring binding offers impressive stability and safety with an ultra-light ascent. The new EVO front part effectively absorbs vibrations and prevents snow build-up, while the innovative EVO brake system enables smooth transitions between ascent and descent. Advantages of the ATK RT 11 EVO Lightweight with power - Only 280 g per unit, ideal for fast ascents Adjustable DIN range 3-11 - Precise adjustment for every riding style EVO front section - absorbs vibrations and prevents snow build-up Cam Release System - smooth release for controlled descents EVO brake system - improved safety and easy handling Elastic Response System (E.R.S.) - compensates for ski flex and ensures constant edge pressure 25 mm adjustment range - adapts to different sole lengths Ski stopper included - available in 91mm Materials - Aluminum 7075, stainless steel and POM for maximum durability technical data weight 280 g per unit DIN range 3 - 11 material Aluminum 7075, stainless steel, POM Climbing aids Flat / +27 mm / +46 mm Heel adjustment range 25 mm Ski stopper widths 86 / 91 / 97 / 102 mm Sustainability & Service All bindings ATK bindings are manufactured in Italy and stand for durability, repairability and precision. Every component - from the brake to the heel piece - is replaceable to maximize the service life of the binding and conserve resources. So you stay optimally equipped throughout the season. FAQ about the ATK RT 11 EVO Who is the RT 11 EVO suitable for? For ski tourers who are looking for low weight, high control and reliability in one package. How heavy is the RT 11 EVO? Only 280 g per unit - ideal for long ascents with maximum efficiency. What is the DIN range? The binding is adjustable from DIN 3 to 11 and offers precise release values. What ski stopper sizes are available? Available in 86 mm, 91 mm, 97 mm and 102 mm. Can I order spare parts individually? Yes, ATK also offers all components of the RT series separately.

The ATK Raider 13 EVO Black is a precise, lightweight and safe touring binding, developed for demanding skiers who demand reliability and performance at the highest level. With only 370 g per unit, it combines technological innovation with robust construction and ensures perfect control on every descent. Advantages of the ATK Raider 13 EVO Automatic ski brake - More safety and easier handling Improved toe piece - Adjustable release on both sides Optimized precision - Perfect adaptation to the individual skiing style Lightweight & robust - only 370 g per binding made of 7075 aluminum, stainless steel and POM DIN range 5-13 - finely adjustable front and rear Climbing aids with 3 positions - Flat / +27 mm / +46 mm 25 mm adjustment range - for different sole lengths Ski stopper included - 97 mm Elastic Response System (E.R.S.) - even power transmission and more stability Technical data weight 370 g per unit DIN range 5 - 13 material Aluminum 7075, stainless steel, POM Climbing aids Flat / +27 mm / +46 mm Heel adjustment range 25 mm Length compensation 14 mm (Elastic Response System) Ski stopper widths 86 / 91 / 97 / 102 / 108 / 120 mm Sustainability & Service Like all ATK bindings the Raider 13 EVO is developed and produced in Italy. Every part is replaceable - from the brake to the heel piece - to ensure longevity and sustainability guaranteed. This keeps your binding in top shape for many seasons and reduces waste at the same time. FAQ about the ATK Raider 13 EVO Who is the Raider 13 EVO suitable for? The binding is aimed at experienced ski tourers who are looking for maximum control and performance on tours and descents. How heavy is the binding? Only 370 g per unit - ideal for easy ascents and powerful descents. What ski topper sizes are available? The Raider 13 EVO is available in 86, 91, 97, 102, 108 and 120 mm. What is the Elastic Response System? The E.R.S. compensates for the flex of the ski and ensures optimum power transmission and edge grip. Can I order spare parts individually? Yes, ATK offers all components - even for older models - as spare parts.