Dynafit Blacklight 95 skis
CHF 559.00*
% CHF 799.00* (30.04% saved)
Ready for immediate shipment, delivery in 1-3 working days
Product information "Dynafit Blacklight 95 skis"
The Blacklight 95 is a wide and powerful touring ski with a low weight of 1,160 g, which scores with top performance on the descent. Your entry into the backcountry: The Blacklight 95 is the widest ski in the Blacklight Speed series. It was developed for touring skiers for whom no distance is too far in search of the perfect powder. If you want a ski with strong downhill performance, but at the same time want to be as light and efficient as possible on the ascent to the perfect line, then the Blacklight 95 is the model of your choice. With 95 mm underfoot, a larger radius and a longer tip rocker, the ski is made for you to be fast, make big turns in the snow and enjoy powder conditions to the full. The Blacklight 95 has a 100 % UD carbon topsheet. UD is the abbreviation for unidirectional and describes the arrangement of the carbon fibers. Compared to classic carbon, this construction has a higher tensile strength and higher load-bearing capacity with a lower density. The Blacklight 95 is equipped with a wood core made from 100% high-quality paulownia. Thanks to the 3D construction, the flywheel mass is reduced in front of and behind the binding area, thus reducing the overall weight of the ski. This gives you extremely stable skiing characteristics despite the low weight. The rocker construction at the tip and tail and the sidecut are adapted to the respective ski length - this is unique in the ski touring market. This means that the effective edge length remains proportionally the same for all lengths and works independently of the ski length. To ensure the best possible power transmission to the ski, the Blacklight is equipped with a full ABS sidewall. The base also has a special racing grind for even more speed. This allows you to make up valuable time in the "race" for the first turns. Blacklight 95 - your lightweight and high-performance powder specialist.
| Binding: | without binding |
|---|---|
| Center width: | 95mm |
| Color: | Black |
| LANGE: | 172cm |
| Manufacturer: | Dynafit |
| Style: | Touring skis |
| Target group: | Gentlemen |
| Type: | Camber + Rocker |
Login
Warmth and style on ski tours and in everyday life.The Dynafit Radical Beanie Alloy Melange beanie is a must-have for every ski tour and for the hut party afterwards. The stylish beanie simply always fits and should not be missing in any backpack when touring. The Radical beanie is made from a functional wool/acrylic blend and has a quick-drying insert on the inside. It keeps you reliably warm at all times in cold temperatures and looks good at the same time. Radical beanie - Warm all-rounder with a cool Look.
Reflective design for more safety: With the Alpine Reflective gloves, your hands stay warm and you are more visible when trail running in the dark. As a year-round runner, you know the problem: in the autumn and winter months, the days are short and you are often forced to clock up your kilometers after dusk or in the early hours of the morning. DYNAFIT has developed the Alpine Reflective gloves with large reflective stripes to ensure that you are not overlooked by others. So you can do your laps in the dark without a care in the world. The lightweight thermal fabric provides pleasant warmth and comfort in cool temperatures and at the same time prevents sweaty hands thanks to its good breathability. The No Pain No Gain silicone print on the palm guarantees perfect grip if you like to run with poles. Alpine Reflective gloves - comfort and visibility in the transition period. Material: elastane 19 %, polyamide 82 %
Reflective running tights - Dynafit Reflective Tights Men Black Out/Nimbus perfect for the transition period.Running tights with reflective 360° stripe design on the lower legs for better visibility during training sessions in the dark.Reflective design for greater safety: the Alpine Reflective Tights for men make you more visible when trail running in the dark.As a year-round runner, you know the problem: in the autumn and winter months, the days are short and you are often forced to clock up your kilometers after dusk or in the early hours of the morning. DYNAFIT has developed the Alpine Reflective Tights with reflective 360° stripe designs so that you won't be overlooked by others. So you can do your laps worry-free and are perfectly equipped all round. However, the extraordinary Look is not all these running tights have to offer.The soft, brushed inside provides pleasantly light warmth and guarantees a high level of comfort. At the same time, the tights score points for their high breathability and unrestricted freedom of movement in all directions. The tight-fitting trousers have two mesh pockets and a zipped pocket on the back to store small items. The width of the waistband can be adjusted using an internal drawstring for a perfect fit.
Ultralight and particularly comfortable in hot temperatures: the thin Vertical Mesh socks are perfect for steep mountain runs in summer.You'll work up quite a sweat on demanding verticals. Choosing the right socks is essential to ensure that your feet stay dry, your skin doesn't get soggy and blisters or pressure points don't stand a chance. The Dynafit Vertical Mesh Footie Black Out functional socks bring lightness to your run with their minimal weight of just 30 grams. The seamless design ensures a particularly high level of comfort and prevents creases and friction. The Dryarn® material guarantees optimum breathability and quick drying for a pleasant foot climate at all times. The socks extend to just above the ankle and therefore fit perfectly in any running shoe.
The Blacklight 88 ski touring skin was developed by Pomoca. It prevents annoying stud formation and has optimum gliding and climbing properties. Like all skins from POMOCA, the DYNAFIT ski touring skin for the Blacklight 88 is made in Switzerland and impresses in the snow with its top quality. A special intermediate membrane prevents water absorption and eliminates the need for edge sealing. The skins are tear and wear resistant and you can simply fold them in the middle or stick them together. The clever Dynafit tensioning system provides the ideal connection between the skin and the ski tip. The penetration of snow and ice is effectively prevented as the skin fits snugly right up to the tip. On the way to the summit, you can always rely on your Blacklight ski touring skins - top performance, comfort and maximum safety guaranteed. Blacklight ski touring skins - 100 % reliable right up to the last meter of altitude. Length: 158.
Abstract - The new Free line has everything a freeskier's heart desires: 100% poplar wood core, supported by our DYNAFIT Carbon Speed Stringers, which offer a fast setback of the ski, modern new sidecut, a very balanced flex and a newly developed tip & tail rocker. FREE 97- for effortless uphills and strong downhill performance. Playful, easy to turn and stable at the same time - the new Free 97 touring ski for men makes freeskiers' hearts beat faster and conjures up pure skiing pleasure in the snow in a wide variety of conditions. Thanks to the lightweight construction with a 100% poplar wood core and the proven DYNAFIT Carbon Speed Stringers, you can save your energy on the uphill and give it your all on the downhill. Downhill-oriented touring ski for full powder fun A modern sidecut and a newly developed rocker at the tip and tail, together with the balanced flex, ensure optimum handling characteristics and make the ski the perfect companion for untracked powder snow, steep gullies and varied descents. Even in demanding snow conditions or with a heavy rucksack, you'll retain full control at all times and get your turns spot on. The slightly raised tip ensures improved turn initiation and easy floatation. The continuous sidewall guarantees direct power transmission to the ski edge for the best performance and stability on both soft and hard snow. Free 97 - For unforgettable powder turns. Excl. binding
The lightweight Trail Pro unisex sunglasses with full frame and self-tinting lenses protect your eyes when trail running, mountaineering and on ski tours.Reliable all-round protection, clear vision and stylish look with minimal weight: The Trail Pro opens up new perspectives and rounds off your efficient DYNAFIT system perfectly. In mountain sports, your eyes need special protection from harmful UV rays, snow, dirt and wind. High-quality sunglasses and ski goggles are therefore an essential accessory for every tour. With the 34 g lightweight and versatile Trail Pro, you can enjoy mountain sports without a care in the world. You don't have to worry about the health of your eyes – and you simply look cool.The photochromatic DIVEL Optics quality lenses from Italy automatically adjust to the light conditions in a matter of seconds so that you have a clear view both in the sun and in shady passages. They provide reliable protection against UV-A, -B and -C rays. Thanks to the large field of vision, you have an optimum view of your surroundings and are safe on the road even at high speeds. The Grilamid material of the frame is lightweight, flexible and makes the goggles more resistant to damage. The ventilation system ensures that air can always circulate and prevents the lenses from fogging up. The non-slip temple tips and rubber nose guarantee a secure grip without slipping, even during intense movement. With its stylish colors and casual design, the Trail Pro completes your outfit from head to toe. Gender: Unisex Weight: 34g Frame Materials: TR 90 SL 360° Lens Technology: Photochromic Transmittance: 63% - 17 % Base Curve: 6 Packaging: EVA Box with Banderole - Microbag
The TLT Touring Dynastretch Pant for men is a technical, lightweight ski touring pant for performance-oriented, fast intermediates. The elastic Dynastretch material with 4-way stretch and the athletic cut allow great freedom of movement for your speed tours. The fabric is wind- and water-repellent and abrasion-resistant at the same time. The breathable material and perforations in the back allow moisture to escape quickly on demanding climbs. In addition, two ventilation zippers provide extra cooling when needed. Elastic inserts at the waistband ensure a perfect fit and a comfortable fit. The reinforced leg cuffs can be extended with a zipper so that the softshell pants fit over any ski boot. TLT Touring Dynastretch pants - your all-round pants for more speed.
The Dynafit Ride Dynastretch Shorts Men Black Out mountain bike shorts for men score points in the saddle with casual Look, functionality and well thought-out details. The water- and wind-repellent Dynastretch material impresses with high breathability, so that you are well ventilated on sweaty climbs. It is also abrasion-resistant, so you can enjoy the shorts for a long time. The longer, wider enduro cut ensures a stylish, sporty look on the trails and the shorts can be used optimally with protectors on demanding downhills.You can adjust the waistband of the shorts to your needs using the Velcro fasteners on the sides. The model is rounded off with four zipped pockets with plenty of space for small items such as energy bars, smartphones etc. Reflectors ensure better visibility at dusk or in poor lighting conditions. For extra comfort and long-lasting riding fun, simply combine the shorts with the Ride Padded Under Shorts. Ride Dynastretch Shorts - casual eye-catchers on the trails. Technical data Dynafit Ride Dynastretch Shorts Men Black Out: Hip adjustment Compatible with Chamois cycling shorts Reflectors Water-repellent Wind resistant Abrasion resistant Silicone grip Slit pockets with zipper Breathable Thigh pocket Stretch Smartphone pocket
Ultralight and versatile for ski touring and mountain pants, the Dynafit belt. Only 45g - lightweight belt with aluminum buckle.The Ultra Light Belt is your practical accessory to additionally secure your ski touring or mountain pants. The belt weighs an ultra-light 45 grams and is made from flexible textile. The aluminum buckle allows the belt to be fastened quickly and easily with just one hand movement.
Suitable binding
The Fritschi Xenic Yellow is a lightweight but robust touring binding that offers outstanding performance both uphill and downhill. It is ideal for ambitious alpinists who do not want to compromise on safety and comfort. With a DIN adjustment range of 3 to 10, it also offers very light ski tourers optimum safety. The patented system of the front unit holds the boot firmly and securely in the binding, even on dynamic descents, without the need for locking. The Xenic 10 is designed for high-performance skiers looking for precise and stable power transmission. The extra-wide heel support and dynamic length compensation of 10 mm ensure optimum edge grip and agility on any terrain. The construction made of high-quality high-tech materials ensures stability and durability with low weight. DIN adjustment range: 3 - 10 (Xenic 10) Extra wide heel support for high stability Dynamic length compensation of 10 mm for optimum edge grip Patented front unit prevents unintentional release No locking required to secure the hold Separate systems for sideways and frontal release Lightweight construction with high-tech materials 99 % of parts manufactured in Switzerland The Fritschi Xenic offers a reliable connection between boot and ski to ensure a dynamic and safe skiing experience. It is perfect for ski tourers who love both ascents and descents.
Flexible on the ascent, powerful on the descent: The Fritschi Xenic Plus 12 impresses with outstanding downhill performance and full safety technology with minimal weight. It is ideal for all those who want to remain flexible on the ascent and demand maximum performance on the descent. Features of the Fritschi Xenic Plus 12 Horizontal pin levers at the front - prevent unintentional release without risky locking Rotating, broadly supported heel unit - ensures high stability and direct power transmission DIN values can be adjusted separately - Precise adjustment of lateral and frontal release Lightweight with full safety package - unique in this category No additional locking required for the descent Weight: only 280 g per unit (without ski stopper) Ski stopper widths: 75 / 85 / 95 / 105 mm - also available without stopper Awarded by Alpin magazine for performance and safety Technical data binding system Pin binding with rotating heel unit DIN 3 - 12 Weight 280 g per unit (without ski stopper, +45 g) Ski stopper 75 / 85 / 95 / 105 mm FAQ about the Fritschi Xenic Plus 12 Who is the Xenic Plus 12 suitable for? It is aimed at ski tourers who are looking for minimum weight uphill and maximum stability downhill. What makes it different from other lightweight bindings? The Xenic Plus 12 is the only ultra-light binding that offers a complete safety package like an alpine binding. Do I need a lock for the descent? No, the binding is designed to prevent unintentional release - without any risky locking mechanism. How heavy is the binding? It weighs only 280 g per unit, with ski stopper approx. 325 g - making it one of the lightest in its class.
Optimum safety even for lightweights with ambitions. With a DIN adjustment range, the new Xenic offers optimum safety even for very light touring skiers*. Guaranteeing reliable release even at low setting values is not a matter of course with pin bindings, but it is extremely important for light and very light people. The Xenic is the solid, lightweight binding for alpinists who go all out on the uphill, but also accelerate on the downhill in any alpine terrain. Both for high-performance skiers and for those who get their fitness on the piste. With the DIN setting range from as low as 3, it also offers very light and young sports enthusiasts the necessary safety plus outstanding downhill characteristics. Segment: High TouringTarget group: ambitious alpinists who are looking for light weight and do not compromise on safety and performanceIdeal ski width: 70 to 105 mmDIN adjustment range: 3 to 10Weight: 280 g / unit without stopper
The comfortable evolution of the legendary TLT Speed combines maximum comfort and lightness. Patented side stops for maximum power absorption on side hits and comfortable entry into the binding
A real all-rounder: light, user-friendly, tried and tested over many years and even more robust thanks to the aluminum-reinforced rear jaw. The perfect companion for all tours from the local mountain to high-altitude ski tours.The Radical binding is a real all-rounder and combines robustness, comfort and user-friendliness. The STEP-IN SIDE TOWERS make it easier to get into the toe piece by over 30% and at the same time increase lateral stability during the descent. The new aluminum-reinforced rear jaw enables even better power transmission between heel and ski thanks to greater rigidity, making the bindings a robust partner for many years to come.The Radical has two climbing aids that can be added or removed quickly and easily with the pole. In terms of length adjustment, the binding offers 25 mm of leeway, which allows adjustments to be made to different sole lengths. The release values are fully adjustable laterally and vertically from DIN 4-10. Crampons can be attached to the Radical.Like all DYNAFIT bindings, the Radical is developed and manufactured in Germany. Technical data Radical Blue Weight: 520gDIN: 4-10Stopper Size: 100mm
The Fritschi Vipec Evo 12 is a versatile pin binding for all those who value safety, performance and comfort. It is perfect for alpine tours with challenging descents as well as for enjoyable ski tours in snowy landscapes. Thanks to the innovative safety technologies, the binding offers extra protection - both on the ascent and on the descent. Features of the Fritschi Vipec Evo 12 Side release at the front with 13 mm elasticity on each side for maximum safety Fixed pin heel unit without rotation for efficient power transmission DIN values adjustable: front side release, rear front release Emergency release when climbing for additional safety in critical situations Weight: only 500 g per unit (without ski stopper) Ski stopper widths: 80 / 90 / 100 / 110 / 120 mm Awarded by Alpin magazine for performance and safety Technical data binding system Pin binding with fixed heel unit DIN 4 - 12 Weight 500 g per unit (without ski stopper, +50 g) Ski stopper 80 / 90 / 100 / 110 / 120 mm FAQ about the Fritschi Vipec Evo 12 Who is the Vipec Evo 12 suitable for? It is ideal for experienced touring skiers, but also for beginners who value safety and versatility. What are the benefits of the side release at the front? The binding releases sideways at the front, similar to an alpine binding. This protects you in the event of a fall and reduces the risk of injury. Can I also use the binding on alpine tours? Yes, the Vipec Evo 12 is designed for both leisurely ski tours and demanding alpine tours with steep descents. How heavy is the binding? One unit weighs only 500 g (without ski stopper). With stopper it adds approx. 50 g.
The Marker Duke PT 12 (DIN 4-12) also combines the performance of a jester with the climbing comfort of a pin binding. The latest generation of the even lighter Hollow Linkage heel at the rear and the completely newly developed Ride & Hike Toe at the front: the upper part of the toe piece is folded forward to expose the pin binding. To save moving weight on the ski, the front upper section can also be removed and stowed in the rucksack. The multifunctional Lock & Walk unit automatically locks the brake and offers a 10° climbing aid. Before setting off, the toe piece is simply put back on or folded down, whereby it automatically locks fourfold and activates the function of a classic toe piece. With a standing height of just 24 mm, direct power transmission and fast edge changes are a matter of course. Thanks to Sole.ID, all Duke PTs are compatible with alpine, touring and GripWalk soles. Product features Marker Duke PT 12 100mm: Category: Hardcore Freeride Ride & Hike Brake width: 100 mm, 125 mm Z-value: 4.0 - 12.0 Boot type: Adult, standard Alpine, GripWalk Adult, Touring Boots Recommended rider weight: up to 120 kg Stand height without ski: 24 mm Toe piece: Ride & Hike Automatic heel: Hollow Linkage 2 Heel adjustment range: 60 mm Walking modes: 0°, 10° Weight: Uphill 850 g / downhill: 1150 g AFD skid plate: Stainless steel
The Marker Duke PT 12 (DIN 4-12) also combines the performance of a jester with the climbing comfort of a pin binding. The latest generation of the even lighter Hollow Linkage heel at the rear and the completely newly developed Ride & Hike Toe at the front: the upper part of the toe piece is folded forward to expose the pin binding. To save moving weight on the ski, the front upper section can also be removed and stowed in the rucksack. The multifunctional Lock & Walk unit automatically locks the brake and offers a 10° climbing aid. Before setting off, the toe piece is simply put back on or folded down, whereby it automatically locks fourfold and activates the function of a classic toe piece. With a standing height of just 24 mm, direct power transmission and fast edge changes are a matter of course. Thanks to Sole.ID, all Duke PTs are compatible with alpine, touring and GripWalk soles. Product features Marker Duke PT 12 125mm: Category: Hardcore Freeride Ride & Hike Brake width: 100 mm, 125 mm Z-value: 4.0 - 12.0 Boot type: Adult, standard Alpine, GripWalk Adult, Touring Boots Recommended rider weight: up to 120 kg Stand height without ski: 24 mm Toe piece: Ride & Hike Automatic heel: Hollow Linkage 2 Heel adjustment range: 60 mm Walking modes: 0°, 10° Weight: Uphill 850 g / downhill: 1150 g AFD skid plate: Stainless steel
Robust speed touring binding with minimal weight and maximum reliability for alpine challenges. The Dynafit Superlite 175 - Z12 Black/Yellow 105mm binding comes with stopper and adjustment travel. Replacement suspension fork is available separately.The Superlite 175+ impresses with minimal weight and maximum reliability as a robust speed binding for demanding alpine tours.When the going gets tough on the mountain, nothing can go wrong: You can rely 100% on the strong Superlite 175+ at all times and still be light, fast and efficient on the mountain. On the ascent, you can choose between two walking modes (half-step and climbing aid) for additional comfort. On the descent, the Superlite 175+ impresses with very good power transmission to the ski. The release values are fully adjustable laterally from DIN 5-12. The vertical release is fixed, but can be adjusted using a separately available exchangeable spring fork. The Superlite 175+ is equipped with a ski stopper as standard and weighs a light 319 grams in this version.The Superlite 175+ is fitted with an adjustment plate that allows a heel adjustment range of 20 mm to adapt to different sole lengths. Crampons can be quickly and easily attached for use in icy or slippery conditions.Like all DYNAFIT bindings, the Superlite 175+ is developed and manufactured in Germany and comes with the DYNAFIT Lifetime Guarantee.
With its introduction, the innovative Kingpin redefines the performance standard for alpine touring bindings. The toe piece and heel piece are the result of years of development work: very easy to use, thanks to the wide drill pattern and XXL Power Transmitter with unusually high power transmission and simply impressive walking comfort (incl. 0°, 7°, 13° climbing aid). The current Kingpin 13 with carbon lever unit now carries the lighter toe piece of the Alpinist with only two springs, which further reduces the weight. Release functionality and downhill performance are still at the highest level. KINGPIN FERSE The revolutionary heel construction for PinTech bindings with widely spaced sole contact points provides loss-free and very direct power transmission, which is normally only known from alpine bindings. The Kingpin also offers unprecedented advantages in terms of safety. CLIMBING AID (KINGPIN) All good climbing aids have one thing in common: they can be operated by feel in any situation, even when you don't have them in view. Ease of use is a basic requirement and reduced effort is not a shame. The Kingpin also impresses with its integrated ascent aid with a choice of 7° and 13°, which can be easily operated with the plate of the ski pole. And because the stirrup is located in the upper third of the heel, it can be reached with any plate shape or the tip of the pole. KINGPIN TOE PIECE The Pintech design of the KingPin toe piece enables ergonomic rolling of the foot and the most direct ski connection. Six steel springs ensure optimum energy absorption up to a Z-value of 13. Fixed stops guarantee comfortable entry in all conditions.
Robust speed touring binding with minimal weight and maximum reliability for alpine challenges. The binding comes with stopper and adjustment travel. Replacement suspension fork is available separately.The Superlite 175+ impresses with minimal weight and maximum reliability as a robust speed binding for demanding alpine tours.When the going gets tough on the mountain, nothing can go wrong: You can rely 100% on the strong Superlite 175+ at all times and still be light, fast and efficient on the mountain. On the ascent, you can choose between two walking modes (half-step and climbing aid) for additional comfort. On the descent, the Superlite 175+ impresses with very good power transmission to the ski. The release values are fully adjustable laterally from DIN 5-12. The vertical release is fixed, but can be adjusted using a separately available exchangeable spring fork. The Superlite 175+ is equipped with a ski stopper as standard and weighs a light 319 grams in this version.The Superlite 175+ is fitted with an adjustment plate that allows a heel adjustment range of 20 mm to adapt to different sole lengths. Crampons can be quickly and easily attached for use in icy or slippery conditions.Like all DYNAFIT bindings, the Superlite 175+ is developed and manufactured in Germany and comes with the DYNAFIT Lifetime Guarantee.
Robust touring binding and the patented rotation toe piece for reliability at the highest level. Now also adjustable up to DIN 10.The Rotation Lite 10 binding with patented rotation toe piece impresses with its robust construction and absolute reliability on all ski tours.The rotation toe piece compensates for impacts that can affect the ski and binding during a dynamic and powerful descent. This makes the release function of the binding even more reliable and effectively counteracts unwanted early release.Thanks to the new aluminum toe piece, the weight of the binding has been reduced to a light 550 g. This means you don't have a single gram too much on your skis and save energy on the ascent.The new aluminum-reinforced rear jaw provides you with even better power transmission between heel and ski thanks to its increased stiffness and makes the bindings a long-lasting, robust partner - no matter where you are out and about.The hub centering helps to easily adjust the zero position of the boot and thus your position for the ascent on all bindings with rotation toe piece. Thanks to the three different walking modes, you can ski uphill with maximum comfort.The Rotation Lite 10 binding offers a 25 mm length adjustment range for adapting to different sole lengths. It can be set to release values between 4-10.Like all DYNAFIT bindings, the Rotation Lite 10 is developed and manufactured in Germany and comes with the DYNAFIT Lifetime Guarantee. Features Dynafit ST Rotation Lite 10 - 90mm ski touring binding: Weight 550g Lock Type Manual Adjustable Length 12.5 - 12.5(+/- mm) DIN 4-10
The Fritschi Tecton 13 is the perfect binding for freeskiers looking for an active, dynamic skiing experience in challenging terrain. This downhill-oriented pin binding offers maximum power transmission and precise control with low weight, ideal for deep snow descents, steep faces, couloirs and fast turns. With a DIN range of 5 to 13 and a weight of just 550 g per unit without stoppers, the Tecton is ideal for both ascents and descents. Segment: Free Skiing & Touring DIN adjustment range: 5 to 13 Weight: 550 g / unit without stopper Ski width: 90 / 100 / 110 / 120 mm stopper Alpine heel clamps with rail for maximum power transmission Lateral release at the front with 13 mm dynamic travel Frontal release at the rear with 9 mm dynamic travel Dynamic length compensation of 10 mm for constant edge grip Interchangeable color clips: Ice Blue as standard, also available in Yellow Green and Black The Tecton 13 is not only functional, but also visually adaptable thanks to the interchangeable Color Clips. Its high elasticity and the safety technologies of the alpine bindings ensure maximum reliability in every skiing situation, both on the ascent and on the descent. With an optimum material mix of high-tech plastics and metal alloys, the binding is lightweight yet extremely stable. Especially for freeride pros, the Tecton offers uncompromising performance, safety and comfort - for the ultimate skiing experience in the backcountry and on challenging slopes.
The ATK RT 11 EVO Black combines maximum performance with minimum weight. With only 280 g per unit this touring binding offers impressive stability and safety with an ultra-light ascent. The new EVO front part effectively absorbs vibrations and prevents snow build-up, while the innovative EVO brake system enables smooth transitions between ascent and descent. Advantages of the ATK RT 11 EVO Lightweight with power - Only 280 g per unit, ideal for fast ascents Adjustable DIN range 3-11 - Precise adjustment for every riding style EVO front section - absorbs vibrations and prevents snow build-up Cam Release System - smooth release for controlled descents EVO brake system - improved safety and easy handling Elastic Response System (E.R.S.) - compensates for ski flex and ensures constant edge pressure 25 mm adjustment range - adapts to different sole lengths Ski stopper included - available in 91mm Materials - Aluminum 7075, stainless steel and POM for maximum durability technical data weight 280 g per unit DIN range 3 - 11 material Aluminum 7075, stainless steel, POM Climbing aids Flat / +27 mm / +46 mm Heel adjustment range 25 mm Ski stopper widths 86 / 91 / 97 / 102 mm Sustainability & Service All bindings ATK bindings are manufactured in Italy and stand for durability, repairability and precision. Every component - from the brake to the heel piece - is replaceable to maximize the service life of the binding and conserve resources. So you stay optimally equipped throughout the season. FAQ about the ATK RT 11 EVO Who is the RT 11 EVO suitable for? For ski tourers who are looking for low weight, high control and reliability in one package. How heavy is the RT 11 EVO? Only 280 g per unit - ideal for long ascents with maximum efficiency. What is the DIN range? The binding is adjustable from DIN 3 to 11 and offers precise release values. What ski stopper sizes are available? Available in 86 mm, 91 mm, 97 mm and 102 mm. Can I order spare parts individually? Yes, ATK also offers all components of the RT series separately.
The ATK Raider 13 EVO Black is a precise, lightweight and safe touring binding, developed for demanding skiers who demand reliability and performance at the highest level. With only 370 g per unit, it combines technological innovation with robust construction and ensures perfect control on every descent. Advantages of the ATK Raider 13 EVO Automatic ski brake - More safety and easier handling Improved toe piece - Adjustable release on both sides Optimized precision - Perfect adaptation to the individual skiing style Lightweight & robust - only 370 g per binding made of 7075 aluminum, stainless steel and POM DIN range 5-13 - finely adjustable front and rear Climbing aids with 3 positions - Flat / +27 mm / +46 mm 25 mm adjustment range - for different sole lengths Ski stopper included - 97 mm Elastic Response System (E.R.S.) - even power transmission and more stability Technical data weight 370 g per unit DIN range 5 - 13 material Aluminum 7075, stainless steel, POM Climbing aids Flat / +27 mm / +46 mm Heel adjustment range 25 mm Length compensation 14 mm (Elastic Response System) Ski stopper widths 86 / 91 / 97 / 102 / 108 / 120 mm Sustainability & Service Like all ATK bindings the Raider 13 EVO is developed and produced in Italy. Every part is replaceable - from the brake to the heel piece - to ensure longevity and sustainability guaranteed. This keeps your binding in top shape for many seasons and reduces waste at the same time. FAQ about the ATK Raider 13 EVO Who is the Raider 13 EVO suitable for? The binding is aimed at experienced ski tourers who are looking for maximum control and performance on tours and descents. How heavy is the binding? Only 370 g per unit - ideal for easy ascents and powerful descents. What ski topper sizes are available? The Raider 13 EVO is available in 86, 91, 97, 102, 108 and 120 mm. What is the Elastic Response System? The E.R.S. compensates for the flex of the ski and ensures optimum power transmission and edge grip. Can I order spare parts individually? Yes, ATK offers all components - even for older models - as spare parts.
The ATK Raider 13 EVO Black is a precise, lightweight and safe touring binding, developed for demanding skiers who demand reliability and performance at the highest level. With only 370 g per unit, it combines technological innovation with robust construction and ensures perfect control on every descent. Advantages of the ATK Raider 13 EVO Automatic ski brake - More safety and easier handling Improved toe piece - Adjustable release on both sides Optimized precision - Perfect adaptation to the individual skiing style Lightweight & robust - only 370 g per binding made of 7075 aluminum, stainless steel and POM DIN range 5-13 - finely adjustable front and rear Climbing aids with 3 positions - Flat / +27 mm / +46 mm 25 mm adjustment range - for different sole lengths Ski stopper included - 102 mm Elastic Response System (E.R.S.) - even power transmission and more stability Technical data weight 370 g per unit DIN range 5 - 13 material Aluminum 7075, stainless steel, POM Climbing aids Flat / +27 mm / +46 mm Heel adjustment range 25 mm Length compensation 14 mm (Elastic Response System) Ski stopper widths 86 / 91 / 97 / 102 / 108 / 120 mm Sustainability & Service Like all ATK bindings the Raider 13 EVO is developed and produced in Italy. Every part is replaceable - from the brake to the heel piece - to ensure longevity and sustainability guaranteed. This keeps your binding in top shape for many seasons and reduces waste at the same time. FAQ about the ATK Raider 13 EVO Who is the Raider 13 EVO suitable for? The binding is aimed at experienced ski tourers who are looking for maximum control and performance on tours and descents. How heavy is the binding? Only 370 g per unit - ideal for easy ascents and powerful descents. What ski topper sizes are available? The Raider 13 EVO is available in 86, 91, 97, 102, 108 and 120 mm. What is the Elastic Response System? The E.R.S. compensates for the flex of the ski and ensures optimum power transmission and edge grip. Can I order spare parts individually? Yes, ATK offers all components - even for older models - as spare parts.
The ATK Freeraider 15 EVO is the latest generation of high-performance freetouring bindings - developed for skiers who demand lightness on the ascent and uncompromising control on the descent. With a weight of only 395 g it combines state-of-the-art technology, maximum safety and unparalleled downhill precision. The Freeraider 15 EVO is available in several colors, including Indigo, Orange, Black Sand, Pink, Titanium and Yellow. Advantages of the ATK Freeraider 15 EVO Maximum downhill performance - Developed for freeriders with the highest demands Lightweight & stable - only 395 g with best power transmission ELASTIC RESPONSE SYSTEM - guarantees even pressure distribution under load DIN values 7-15 - Adjustable front and rear for maximum safety climbing aids with 3 positions - Flat, +24 mm, +49 mm Skibrakes included - available in widths 86, 91, 97, 102, 108 and 120 mm Heel adjustment range - 25 mm for precise adjustment to different sole lengths Robust materials - 7075 aluminum, stainless steel and POM for durability and stability Technical data Weight 395 g per unit Materials Aluminum 7075, stainless steel, POM DIN value front 7 - 15 (AL14 included) DIN value rear 7 - 15 (AL13 included) Length compensation 14 mm (E.R.S.) Heel adjustment 25 mm Climbing aids Flat / +24 mm / +49 mm Ski stopper widths 86 / 91 / 97 / 102 / 108 / 120 mm Sustainability & maintenance ATK stands for durable design. All components of the Freeraider 15 EVO - from the climbing aid mechanism to the ski stopper - are interchangeable and available as spare parts. This guarantees a long service life and reduces waste. FAQ about the ATK Freeraider 15 EVO Who is the Freeraider 15 EVO suitable for? The binding is ideal for ambitious freeriders and ski tourers who are looking for maximum performance and stability. How much does the binding weigh? One unit weighs just 395 grams - perfect for free touring with top downhill performance. Which ski topper sizes are available? The binding is available in 86, 91, 97, 102, 108 and 120 mm - suitable for almost all freeride skis. What is the Elastic Response System? The E.R.S. ensures even pressure distribution with compression and relief of the ski - for more control and safety on the descent. Can the Freeraider 15 EVO be serviced? Yes, all components are replaceable and available as original spare parts. ATK offers comprehensive maintenance and repair options.
You might also like this
The comfortable evolution of the legendary TLT Speed combines maximum comfort and lightness. Patented side stops for maximum power absorption on side hits and comfortable entry into the binding
Secure your Dynafit ski touring pants with the elastic suspenders. The Dynafit suspenders are compatible with the Radical 2 Dynastretch pants, Radical GTX pants, Mercury 2 Dynastretch pants and Mercury Pro pants, among others.
Unpack & Ski - The women's specific version of the Seven Summits+ ski set has a slightly softer flex. The perfectly matched ski set is pre-assembled and consists of Seven Summits skis, Radical Long Travel bindings and skins.The Seven Summits W touring ski has been a tried-and-tested classic in the DYNAFIT ski fleet for many years. Since winter 20/21, it has been back in the snow in a completely new construction and scores points for its maneuverability and stability. It was specially developed for women and offers you a women-specific flex that is softer than the unisex version. This makes the ski more playful and gives you more maneuverability on the descent. The full-length ABS sidewall guarantees you the best possible power transfer to the ski, so that your performance is transferred 100% to the piste or off-piste. Compared to other DYNAFIT ski models, the Seven Summits has an extended radius, which makes the ski very forgiving. At the same time, the solid poplar wood core provides the necessary pop and smoothness. The rocker construction at the tip and tail and the sidecut are adapted to the respective ski length - this is unique in the ski touring market. This means that the effective edge length remains proportionally the same for all lengths and works independently of the ski length. No matter where you are out and about, with the Seven Summits W you are perfectly equipped for all snow conditions and all terrainThe Radical Long Travel binding is a comfortable all-round binding to match the ski. Whether you're on your local mountain or a high-altitude ski tour - with the Radical Long Travel you're always well advised. The binding has two climbing aids that you can operate quickly and easily with your pole. In terms of length adjustment, the model offers 50 mm of leeway for adapting to different sole lengths. The release values are fully adjustable laterally and vertically from DIN 4-10. You can attach crampons to the Radical Long Travel for extra safety in icy or slippery conditions. Like all DYNAFIT bindings, the Radical Long Travel is developed and manufactured in Germany and comes with a lifetime guarantee.The set is completed by the Seven Summits ski skins. These are manufactured in Switzerland in the usual Pomoca quality and have optimum gliding and climbing properties.
Unpack & Ski - the Seven Summits+ Ski Set is pre-assembled and perfectly matched. Consisting of the Seven Summits ski, the Radical Long Travel binding and skins, the ski set impresses on classic ski tours as a forgiving and versatile all-rounder with uncomplicated skiing fun.The Seven Summits+ ski set in the new design is pre-assembled and perfectly coordinated. It consists of the Seven Summits touring ski, the Radical Long Travel binding and skins.The DYNAFIT ski touring sets make ski touring even easier and less complicated. True to the motto "Unpack & Ski", the search for the optimum combination of skis, bindings and skins is a thing of the past. You can simply rely on the many years of experience of the Dynafit experts, who have put together the perfect set-up for you: Order your ski set, unpack it, have your bindings adjusted by a specialist dealer and set off straight away.The set includes the Seven Summits touring ski, a proven classic in the DYNAFIT ski fleet for many years. Since winter 20/21, it has been back in the snow in a completely new construction and scores points for its turning ability and stability. The continuous ABS sidewall guarantees you the best possible power transmission to the ski, so that your performance is transferred 100 percent to the piste or terrain. No matter where you are out and about, with the Seven Summits you are perfectly equipped for all snow conditions and all terrain. Compared to other DYNAFIT ski models, the Seven Summits has an extended radius, which makes the ski very forgiving. At the same time, the solid poplar wood core provides the necessary pop and smoothness. The rocker construction at the tip and tail and the sidecut are adapted to the respective ski length - this is unique in the ski touring market. This means that the effective edge length remains proportionally the same for all lengths and works independently of the ski length.Matching the ski, the Radical Long Travel is a comfortable all-round binding. Whether you're on your local mountain or a high-altitude ski tour - you're always well advised with the Radical Long Travel. The binding has two climbing aids that you can operate quickly and easily with your pole. In terms of length adjustment, the model offers 50 mm leeway for adapting to different sole lengths. The release values are fully adjustable laterally and vertically from DIN 4-10. You can attach crampons to the Radical Long Travel for extra safety in icy or slippery conditions. Like all DYNAFIT bindings, the Radical Long Travel is developed and manufactured in Germany and comes with a lifetime guarantee.The set is completed by the Seven Summits ski skins. These are manufactured in Switzerland in the usual Pomoca quality and have optimum gliding and climbing properties.Seven Summits+ ski set - the all-round carefree package.