Fritschi Vipec Evo 12 100mm

The ultra-light and resilient touring pin binding for high alpine challenges, equipped with a Z-value up to 12. The ultra-light pin binding (245 g without brake) offers active length compensation during ski flex and impressive power transmission on the descent thanks to the 38 mm wide drill pattern. The carbon-reinforced and therefore very stiff toe piece is equipped with anti-icing pads and integrated elastomers for easy entry. The heel offers an ascent aid with 0°, 5° and 9° angles and can be quickly and easily adjusted between ascent and descent mode. Particularly practical: once fitted, the Alpinist has a heel adjustment range of +/-7.5mm to adapt to different sole lengths! Product features Marker Alpinist 12: Category: Alpine Touring Brake width: optional (90 or 105mm) Z-value: 6.0 - 12.0 Boot type: Touring boots Recommended rider weight: max. 110 kg Stand height without ski: 18 mm Toe: Pin Technology Toe Automatic heel: ALPINSIT heel Heel adjustment range: 15 mm Walking modes: 0°, 5°, 9° Weight with brake: 245 g

The Blacklight 95 is a wide and powerful touring ski with a low weight of 1,160 g, which scores with top performance on the descent. Your entry into the backcountry: The Blacklight 95 is the widest ski in the Blacklight Speed series. It was developed for touring skiers for whom no distance is too far in search of the perfect powder. If you want a ski with strong downhill performance, but at the same time want to be as light and efficient as possible on the ascent to the perfect line, then the Blacklight 95 is the model of your choice. With 95 mm underfoot, a larger radius and a longer tip rocker, the ski is made for you to be fast, make big turns in the snow and enjoy powder conditions to the full. The Blacklight 95 has a 100 % UD carbon topsheet. UD is the abbreviation for unidirectional and describes the arrangement of the carbon fibers. Compared to classic carbon, this construction has a higher tensile strength and higher load-bearing capacity with a lower density. The Blacklight 95 is equipped with a wood core made from 100% high-quality paulownia. Thanks to the 3D construction, the flywheel mass is reduced in front of and behind the binding area, thus reducing the overall weight of the ski. This gives you extremely stable skiing characteristics despite the low weight. The rocker construction at the tip and tail and the sidecut are adapted to the respective ski length - this is unique in the ski touring market. This means that the effective edge length remains proportionally the same for all lengths and works independently of the ski length. To ensure the best possible power transmission to the ski, the Blacklight is equipped with a full ABS sidewall. The base also has a special racing grind for even more speed. This allows you to make up valuable time in the "race" for the first turns. Blacklight 95 - your lightweight and high-performance powder specialist.

The Fritschi Axion crampons crampons offer an innovative solution for additional grip on icy or hard snow conditions with the trend-setting AXION TECH. These crampons can be activated when required without having to remove them beforehand - ideal for spontaneous adjustments to difficult conditions during the tour. They are available in two widths to ensure an optimum fit for your skis. Activatable crampons with AXION TECH Simple operation - no disassembly required Available widths: 86 mm, 110 mm With the Fritschi Axion crampons crampons you are perfectly equipped for touring and can provide additional grip in critical moments.

The established Dynafit rubber tensioner allows the skin to be fixed to the ski absolutely securely and quickly - and weighs just 8g. The system is used and appreciated by racers and "normal users" alike.Scope of delivery: 1 pair of Speedskin Fix long

The Marker Duke PT 12 (DIN 4-12) also combines the performance of a jester with the climbing comfort of a pin binding. The latest generation of the even lighter Hollow Linkage heel at the rear and the completely newly developed Ride & Hike Toe at the front: the upper part of the toe piece is folded forward to expose the pin binding. To save moving weight on the ski, the front upper section can also be removed and stowed in the rucksack. The multifunctional Lock & Walk unit automatically locks the brake and offers a 10° climbing aid. Before setting off, the toe piece is simply put back on or folded down, whereby it automatically locks fourfold and activates the function of a classic toe piece. With a standing height of just 24 mm, direct power transmission and fast edge changes are a matter of course. Thanks to Sole.ID, all Duke PTs are compatible with alpine, touring and GripWalk soles. Product features Marker Duke PT 12 125mm: Category: Hardcore Freeride Ride & Hike Brake width: 100 mm, 125 mm Z-value: 4.0 - 12.0 Boot type: Adult, standard Alpine, GripWalk Adult, Touring Boots Recommended rider weight: up to 120 kg Stand height without ski: 24 mm Toe piece: Ride & Hike Automatic heel: Hollow Linkage 2 Heel adjustment range: 60 mm Walking modes: 0°, 10° Weight: Uphill 850 g / downhill: 1150 g AFD skid plate: Stainless steel

The Marker Duke PT 12 (DIN 4-12) also combines the performance of a jester with the climbing comfort of a pin binding. The latest generation of the even lighter Hollow Linkage heel at the rear and the completely newly developed Ride & Hike Toe at the front: the upper part of the toe piece is folded forward to expose the pin binding. To save moving weight on the ski, the front upper section can also be removed and stowed in the rucksack. The multifunctional Lock & Walk unit automatically locks the brake and offers a 10° climbing aid. Before setting off, the toe piece is simply put back on or folded down, whereby it automatically locks fourfold and activates the function of a classic toe piece. With a standing height of just 24 mm, direct power transmission and fast edge changes are a matter of course. Thanks to Sole.ID, all Duke PTs are compatible with alpine, touring and GripWalk soles. Product features Marker Duke PT 12 100mm: Category: Hardcore Freeride Ride & Hike Brake width: 100 mm, 125 mm Z-value: 4.0 - 12.0 Boot type: Adult, standard Alpine, GripWalk Adult, Touring Boots Recommended rider weight: up to 120 kg Stand height without ski: 24 mm Toe piece: Ride & Hike Automatic heel: Hollow Linkage 2 Heel adjustment range: 60 mm Walking modes: 0°, 10° Weight: Uphill 850 g / downhill: 1150 g AFD skid plate: Stainless steel

Abstract - The new Free line has everything a freeskier's heart desires: 100% poplar wood core, supported by our DYNAFIT Carbon Speed Stringers, which offer a fast setback of the ski, modern new sidecut, a very balanced flex and a newly developed tip & tail rocker. FREE 97- for effortless uphills and strong downhill performance. Playful, easy to turn and stable at the same time - the new Free 97 touring ski for men makes freeskiers' hearts beat faster and conjures up pure skiing pleasure in the snow in a wide variety of conditions. Thanks to the lightweight construction with a 100% poplar wood core and the proven DYNAFIT Carbon Speed Stringers, you can save your energy on the uphill and give it your all on the downhill. Downhill-oriented touring ski for full powder fun A modern sidecut and a newly developed rocker at the tip and tail, together with the balanced flex, ensure optimum handling characteristics and make the ski the perfect companion for untracked powder snow, steep gullies and varied descents. Even in demanding snow conditions or with a heavy rucksack, you'll retain full control at all times and get your turns spot on. The slightly raised tip ensures improved turn initiation and easy floatation. The continuous sidewall guarantees direct power transmission to the ski edge for the best performance and stability on both soft and hard snow. Free 97 - For unforgettable powder turns. Excl. binding

With its introduction, the innovative Kingpin redefines the performance standard for alpine touring bindings. The toe piece and heel piece are the result of years of development work: very easy to use, thanks to the wide drill pattern and XXL Power Transmitter with unusually high power transmission and simply impressive walking comfort (incl. 0°, 7°, 13° climbing aid). The current Kingpin 13 with carbon lever unit now carries the lighter toe piece of the Alpinist with only two springs, which further reduces the weight. Release functionality and downhill performance are still at the highest level. KINGPIN FERSE The revolutionary heel construction for PinTech bindings with widely spaced sole contact points provides loss-free and very direct power transmission, which is normally only known from alpine bindings. The Kingpin also offers unprecedented advantages in terms of safety. CLIMBING AID (KINGPIN) All good climbing aids have one thing in common: they can be operated by feel in any situation, even when you don't have them in view. Ease of use is a basic requirement and reduced effort is not a shame. The Kingpin also impresses with its integrated climbing aid with a choice of 7° and 13°, which can be easily operated with the plate of the ski pole. And because the stirrup is located in the upper third of the heel, it can be reached with any plate shape or the tip of the pole. KINGPIN TOE PIECE The Pintech design of the KingPin toe piece enables ergonomic rolling of the foot and the most direct ski connection. Six steel springs ensure optimum energy absorption up to a Z-value of 13. Fixed stops guarantee comfortable entry in all conditions.

Protect your expensive goggles from scratches with the Airwing - Switzerland ski goggle cover. The protective cover has an elastic strap and is compatible with all ski goggles.

LENZ HEAT VEST HEAT VEST 1.0 Men The heated vest from Lenz for cold days outdoors, the heated vest can be operated with all Lenz Smart batteries. Regularfit Stretchable material, the Lenz heating vest should fit close to the body for optimum heat dissipation from the heating elements. Our heat vest 1.0 has been tested under the toughest conditions. CONTROL THE HEATING VEST WITH YOUR SMARTPHONE With the Lenz heat app for smartphones, the heat setting of the Lenz heating vest can be regulated quickly and easily. It also provides an overview of the current charge status of all batteries. Breathable vest with 2 integrated heating elements in the kidney and back area Heat output can be regulated via 3 levels, by smartphone, manually or via remote control Fits under any existing clothing system thanks to the minimum volume Perfect moisture transport and short drying time Wind and water repellent and abrasion resistant (no peeling) Package contents: 2 rechargeable batteries rcB 1800 global charger with charge indicator 1 Lenz heating vest heat vest 1.0 Outer fabric: 84 % polyamide, 16 % elastane Inner fabric: 100 % polyester