Daymaker Touring Classic Ski Touring Adapter

The brand new Tekdapters step right into any alpine binding and instantly transform into an ultra-stable, low-friction pin binding for the ascent. Fold the adapters down to its smallest size and stash it in your pack to experience the descent without worry of accidental release. Ski in variable snow conditions with a whole new level of confidence in your trusted, unaltered alpine bindings with full support. With one simple purchase, you can tour with any ski you own now or in the future without having to buy expensive touring bindings again and again. Lightweight at only 530 g The TEKLOCK ascent aid was developed using 3D scan data collected from all current bindings on the market. The carefully thought-out cut-outs on the front of the jaw plates precisely enclose even the deepest and widest toe pieces, like the famous Salomon STH series, providing the freedom to tour with your most trusted bindings in the backcountry for maximum performance and safety in the backcountry.Glove and ski pole friendly TEKLOCK lever - Lock into the TEKDAPTERS with an easy to use quick release lever. Unlock the system with an oversized lever eyelet designed specifically for your ski pole, eliminating the need to bend over to release the adapter. SOLE-SYNC™ QUICK ADJUSTMENT SYSTEM The Sole-Sync™ system makes it a breeze to adjust the TEKDAPTERS to the sole length of your boots. Fold the TEKDAPTERS from a maximum length of 345 mm to a tiny 255 mm with a simple switch!Customize your size - The alphabetically scaled telescopic tubes can be shortened like ski poles to reduce the pack size to an unobtrusive 205 mm length. An internal catch wire that prevents the TEKDAPTERS from over extending can be tied off for a super quick and precise adjustment to your exact boot size every time.Tool-less AFD adjustment - The tool-less Anti-Friction Device (AFD) shims can be easily adjusted to the exact thickness of your shoe soles. From gripwalk soles (ISO 9355) to downhill soles (ISO 5355), SOLESYNC has you covered no matter how worn your boots are.Neutral position compensation - Just like the popular DAYMAKERS CLASSIC, the lowest mode of the TEKDAPTERS is designed at -2º. This negative angle compensates for the forward lean built into your ski boots and provides an incredibly comfortable upright stance when touring flat terrain, ridge lines and gentle descents.

SUPmover wheels Orange SUPdual – Versatile transport aid for SUP and skis With the Skimover traveler and an easy-to-mount add-on, your skis get wheels in winter and your SUP gets wheels in summer. Super handy and practical – now it's child's play to transport your sports equipment! Made in Switzerland, the SUPmover stands for top quality and functionality. The SUPmover was awarded the AWARD at the Paddle Sports Show in Lyon in 2023. It is delivered pre-assembled so you can use it straight away. Note: To pull the board, a D-ring or handle is required at the front of the SUP (except with Kit SUPi). For use in winter as a Skimover, you need standard ski Velcro straps or our Velcro strap set option or Skimover Velcro strap Pro. Watch video Scope of delivery: SUPmover wheels Orange, SUPdual: Traveler body black in injection-molded "POM" 2 black wheels 1 piece aluminum axle 129mm 2 magnetic polyamide hubs 1 piece MoverBox SUPkit SUPdual consisting of: Base plate in injection-molded "POM" incl. mounting material 1 fin attachment for US box (3D print PLA-CF) height-adjustable 1 fin attachment for plug-in fin (3D print PLA-CF) 1 fabric bag with carabiner 1 Allen key N°3 1 special Velcro strap for attaching the paddle Wondering which kit you need? Our fin kits overview will definitely help you. Order the SUPmover Black now and make transporting your sports equipment easier!

The Bivy Pro bivy sack is a versatile and very robust bivy sack for 1 to 2 people that is ideal for rescue operations and emergencies. Whether the bivouac is planned or becomes necessary due to a sudden change in the weather or an accident - the Bivy Pro protects you reliably! It is windproof and thanks to its PU coating it is also water and dirt repellent. The inner silver coating reflects your body heat and thus effectively protects you from cooling down. Thanks to its numerous loops, it is versatile and can be used, for example, for the makeshift evacuation of an injured person or as a (seat) tent and awning. Product features: Fixed, compressible pack sack with roll top Compact size: suitable for 1 to 2 people Lightweight and compact - ideal for transportation Versatile application options thanks to numerous loops Very robust material in signal color for better visibility Silver coating on the inside for heat reflection Water and dirt-repellent thanks to PU coating Windproof for optimum protection Ideal range of use: Alpine climbing: 5/5 Alpine touring: 5/5 Mountaineering: 5/5 Ski touring: 5/5 Freeride: 5/5 Material: 100% 50D Polyester RIPSTOP The Bivy Pro bivy sack is the ideal companion for all outdoor activities where protection and safety are paramount. Discover the versatility of this high-quality bivy sack now!

The POC Fovea ski goggles in Apricot Sunstone offer an exceptionally wide field of vision, combined with state-of-the-art Clarity lens technology. Thanks to the toric lens, flexible frame and three-layer face foam, the goggles adapt perfectly to different face shapes and ensure maximum comfort – even in extreme cold. POC Fovea – clear vision in any weather The Clarity lenses specifically filter peaks in the color spectrum, enhance contrasts and ensure precise vision in changing light conditions. The Ri-Pel coating protects the lenses from water, dirt, oil and salt, while an anti-fog and anti-scratch coating prevents fogging and scratching. With 100% UV protection, you are well protected on the slopes. Product benefits Toric Clarity lenses for optimum field of vision & contrast Ri-Pel coating against dirt & water Anti-fog & scratch-resistant coating for clear vision Flexible frame construction for a perfect fit Three-layer face pad for high wearing comfort Full UV protection (UV 400) Silicone-coated strap for a secure fit under the helmet Technical data BrandPOC ModelFovea ColorApricot Sunstone LensPartly Sunny Ivory Cat. 2 FitRegular Fit UV protectionUV 400 FAQ What lens does the POC Fovea Apricot Sunstone have? It is equipped with the Partly Sunny Ivory lens (category 2) – ideal for changing light conditions. Can I replace the lenses? Yes, various replacement lenses with different tints and mirror coatings are available for the Fovea. Do the goggles fit under any ski helmet? Thanks to the flexible frame and silicone strap, the Fovea fits securely and comfortably under all standard helmets.

The POC Nexal ski goggles in Apricot Sunstone brings racing-inspired technology to the slopes. With unique cheekbone covers, they not only protect your eyes, but also your face better from wind and cold. The cylindrical Clarity lens offers clear, high-contrast vision in all light conditions and ensures a reduced, modern design. POC Nexal - more than just ski goggles Thanks to frame straps, the goggles sit particularly close to the POC helmet and create a seamless fit for maximum protection. Adjustable ventilation prevents the lenses from fogging up even under high loads, while three-layer face foam and a flexible frame offer maximum comfort. With anti-fog, anti-scratch and Ri-Pel coating, your vision remains clear and protected. Product benefits Cylindrical clarity lens for high-contrast & clear vision Cheekbone covers for additional protection against wind & cold Frame strap for seamless fit with POC helmets Adjustable ventilation to prevent fogging Ri-Pel coating against water, dirt & oil Anti-fog & scratch-resistant coating Three-layer face padding for optimum comfort UV 400 protection against UVA & UVB rays Technical specifications MarkerPOC modelNexal colorApricot Sunstone LensPartly Sunny Ivory Cat. 2 FitRegular Fit UV protectionUV 400 FAQ What is special about the Nexal ski goggles? The Nexal has cheekbone covers that offer additional protection against wind and cold - inspired by racing. Which lens is used? The Nexal Apricot Sunstone comes with the Partly Sunny Ivory lens (category 2) - ideal for changing conditions. Can I replace the lenses? Yes, various replacement lenses with different tints and mirror coatings are available.

More edge grip, more direct power transmission and a sportier stance height: The Dalbello 3 mm Lifter Kit was developed for all DRS WC and DRS models with 97 mm last width developed. The set contains precisely fitting 3 mm plates including screw set and is the clean solution to increase the performance and precision of your DRS shoes. Key Features Compatibility: All Dalbello DRS WC & DRS models with 97 mm last width Performance update: +3 mm stand height for faster edge changes & more pressure on the shovel Perfect fit: Model-specific plates incl. complete screw sets Robust: Precisely manufactured lifters for long-lasting racing performance Scope of delivery 1 set of 3 mm lifter plates (for both shoes) Complete screw set Mounting instructions Mounting & Note For the initial assembly the shoe soles must be professionally milled milled. We offer this service - simply contact us by e-mail. Fitting should only be carried out by qualified workshops. After changes to the sole thickness, the checking for conformity with the standard (ISO 5355/GripWalk) and a binding adjustment (Z-value/AFD height) is mandatory. FAQ Do the lifters fit all DRS models? The kit is suitable for DRS WC and DRS models with 97 mm slat width designed. Separate kits are required for other slat widths/lines. Can I fit the lifts myself? We do not recommend not self-assembly. The soles must be milled and the bindings readjusted. Please contact a specialist workshop. Does the binding setting change? Yes, after lifting, the AFD height, pre-pressing and Z-value must be checked or adjusted to ensure standard-compliant release. What are the noticeable advantages of the 3 mm lifter? More leverage on the edge, more precise initiation, more stable guidance at speed and in icy passages - especially in racing and sporty piste skiing.

More edge grip, more direct power transmission and a sportier stance height: The Dalbello 5 mm Lifter Kit was developed for all DRS WC and DRS models with 97 mm last width developed. The set contains precisely fitting 3 mm plates including screw set and is the clean solution to increase the performance and precision of your DRS shoes. Key Features Compatibility: All Dalbello DRS WC & DRS models with 97 mm last width Performance update: +3 mm stand height for faster edge changes & more pressure on the shovel Perfect fit: Model-specific plates incl. complete screw sets Robust: Precisely manufactured lifters for long-lasting racing performance Scope of delivery 1 set of 5 mm lifter plates (for both shoes) Complete screw set Mounting instructions Mounting & Note For the initial assembly the shoe soles must be professionally milled milled. We offer this service - simply contact us by e-mail. Fitting should only be carried out by qualified workshops. After changes to the sole thickness, the Check for conformity to the standard and a binding adjustment (Z-value/AFD height) is mandatory. FAQ Do the lifters fit all DRS models? The kit is suitable for DRS WC and DRS models with 97 mm slat width designed. Separate kits are required for other slat widths/lines. Can I fit the lifts myself? We do not recommend not self-assembly. The soles must be milled and the bindings readjusted. Please contact a specialist workshop. Does the binding setting change? Yes, after lifting, the AFD height, pre-pressing and Z-value must be checked or adjusted to ensure standard-compliant release. What are the noticeable advantages of the 5 mm lifter? More leverage on the edge, more precise initiation, more stable guidance at speed and in icy passages - especially in racing and sporty piste skiing.

The Circulation from ALPENHEAT warms, dries and eliminates unpleasant odors. The built-in UV light effectively reduces bacteria!The CIRCULATION is a compact and mobile dryer that generates air circulation by convection and both dries and warms. There is no built-in fan - there are no moving parts. The air is heated to approx. 30°C.The boot dryers can be used as useful heat dispensers to preheat your shoes and ski or snowboard boots both at home and in the car. Preheating in the car softens the hard shell of your ski and snowboard boots, making them easier to put on, even in icy temperatures. In addition, the preheated boots keep your feet warm for much longer and prevent them from cooling down so quickly.Spacers on the underside lift the dryer away from the footbed and ensure unhindered air circulation. The air openings in the Circulation shorten the drying time. The cold air is sucked into the Circulation through the bottom openings, heated up and flows out again through the ceiling openings at the top. Features Alpenheat Shoe dryer: With built-in UV light to reduce bacteria Compact, portable and lightweight Fits in any shoe Heats quietly in minutes and dries in hours  Openings for air circulation Integrated spacers Power: 9 watts Dimensions: L 16 x H 5 x W 3 cm Weight: 0.2 kg Adapter for 100-240V worldwide use possible

5mm Sole Orange Lifter Kit including galvanized/hardened steel screws. Provides more control and better power transmission when skiing.These fit all ski boot models, please note that the shell must be reworked if you have not yet mounted one to keep the ISO standard for the binding. We offer this in our store, call us for a boot fitting appointment. Scope of delivery 5mm Lifter Kit 5mm soles for a pair of ski boots 30 hardened steel/galvanized screws

Demon 130 is made for really good skiers who are looking for the best performance, response and comfort. The features are recognizable from tecnica's racing boots, but with a more forgiving fit. "Power Chassis" offers a direct and powerful power transmission and with "Quick Instep" the boots are easy to put on and take off. TECHNICAL DATA OF THE TECNICA Demon 130 Sole: ISO 5355 bi-material Spoiler: Velcro Spoiler Canting: Double oversize canting screwed Flex index: 130 Last width: 100