Therm-ic Insole Heat 3D + C-Pack

Enjoy your winter activities thanks to the Therm-ic heated insole sets. Each set Therm-ic Insoles contains a pair of heatable elements to install on your existing insoles, e.g. from Orthopäd and a pair of C-pack batteries. The self-adhesive heat element can be attached to the sole and is covered with the supplied 3M mesh fabric. The Therm-ic C-Pack 1300 B battery is equipped with Bluetooth so that you can adjust the heat output remotely via your smartphone. The Therm-ic C-Pack batteries are equipped with a USB charger, a 220V charger is also available as an option. Up to 29 hours of warmth in your ski boots Equipped with a single adjustment knob Battery pack with USB charger Mains charger not included in the scope of delivery Scope of delivery Therm-ic Ski boot heating set: Scope of delivery: 1 pair of Therm-ic Insole Heat Kit Matching batteries 1300B up to 22h or 1700B up to 29h USB charger

The Therm-ic USB charger for S-Pack is the ideal solution for charging your S-Pack batteries flexibly. Thanks to the universal USB connection, it fits almost any power source - whether it's a cigarette lighter in the car, a socket with adapter or a PowerBank for on the go. Compact and lightweight, perfect for traveling or use directly in the ski resort. Advantages of the Therm-ic USB charger for S-Pack: Universal USB connection - compatible with S-Pack batteries Easy handling - charge batteries via various power sources Compact design - ideal for on the go With this practical charger, you are always ready for warm feet during winter sports. Order now at ski-shop.ch and keep your batteries always ready for use!

The Sidas Heel Lifter Hard 6mm ensures a targeted fit in the ski boot or sports shoe. The 6 mm increase reduces the volume and significantly improves support in the heel area. Sidas Heel Lifter 6mm – more support and better position in the shoe If your shoe has too much play or you want to optimize your position, this heel lifter is a simple and effective solution. It raises the heel more and thus stabilizes the fit in the shoe. The self-adhesive pad can be inserted quickly and remains reliably in place. Ideal for boot fitting, ski boots or other sports shoes. Advantages Reduces volume in the shoe Improves support in the heel area 6 mm elevation for optimized position Self-adhesive for easy application Ideal for ski boots and sports shoes Product details Product: Sidas Heel Lifter Hard Height: 6 mm Feature: self-adhesive Function: Volume reduction and stabilization Area of application Ski boots Boot fitting Sports shoes Optimization of the fit FAQ What is a heel lifter used for? It reduces the volume in the shoe and improves support in the heel area. How is the lifter applied? Simply remove the protective film and stick the pad in the heel area. Which shoes is it suitable for? It is suitable for ski boots as well as for many other sports shoes. When to choose 6 mm instead of 4 mm? When more volume should be reduced or additional support is needed.

The Head KIT HEEL/TOE EDGE 6 (W3) ISO 5355 S.13 mm is a complete replacement sole set for HEAD ski boots with Alpine standard. The set consists of toe and heel plates and is ideal for replacing worn soles and restoring the correct release values in the ski binding. The soles comply with the ISO 5355 standard (Alpine, without GripWalk) and are a perfect fit for numerous HEAD EDGE and KALIBER models. Perfect for service, workshop or professional replacement after intensive use. Advantages of the Head replacement sole kit Complete set with toe and heel plates ISO 5355 Alpine Standard, height 13 mm Original HEAD spare part Ensures correct binding release Ideal for wear or deviation from the norm Compatible models Season 2025 / 2026 KALIBER 130 MV GW BOA KALIBER 120 MV GW BOA KALIBER 120 MV GW KALIBER 105 W MV GW BOA KALIBER 110 MV GW BOA KALIBER 95 W MV GW BOA KALIBER 100 MV KALIBER 85 W MV EDGE 130 HV GW BOA EDGE 130 HV GW EDGE 120 HV GW BOA EDGE 110 HV GW BOA EDGE 105 W HV GW BOA EDGE 95 W HV GW BOA EDGE 100 HV BOA EDGE 85 W HV EDGE 90 HV EDGE 80 HV EDGE 75 W HV EDGE 65 W HV Season 2024 / 2025 EDGE 130 HV GW EDGE 120 HV GW EDGE 110 HV GW EDGE 105 W HV GW EDGE 95 W HV GW EDGE 100 HV EDGE 10 R HV GW Season 2023 / 2024 EDGE 130 HV GW EDGE 120 HV GW EDGE 110 HV GW EDGE 105 W HV GW EDGE 95 W HV GW EDGE 100 HV EDGE 10 R HV GW Technical data ProductHead KIT HEEL/TOE EDGE 6 (W3) StandardISO 5355 Alpine Height13 mm Scope of deliveryToe and heel plates Article number60123559 Model year2025 / 2026 FAQ Are these soles GripWalk compatible? No, this set complies with the classic Alpine standard ISO 5355 and is not suitable for GripWalk bindings. When should you change ski boot soles? In case of visible wear or if the binding no longer releases correctly. New soles restore safety and compliance. Should the binding be checked after changing? Yes, we recommend a binding check in the workshop after every sole change.

This volume reducer can be fitted under a Sidas insole to reduce boot volume. This gives the foot better support in the shoe, resulting in better precision and more comfort. Available in 4 mm. Can also be cut for a better fit to the shoe. Features: 1 pair (left + right) Height 4mm Dense EVA foam Perfect in hiking boots and outdoor shoes

The Sidas Heel Lifter Hard 4mm ensures a targeted adjustment in the ski boot or sports shoe. The 4 mm elevation reduces the volume and significantly improves support in the heel area. Sidas Heel Lifter 4mm – more support and better position in the shoe If your shoe has too much play or you want to optimize your position, this heel lifter is a simple and effective solution. It slightly lifts the heel and thus stabilizes the fit in the shoe. The self-adhesive pad can be quickly inserted and stays reliably in place. Ideal for boot fitting, ski boots or other sports shoes. Advantages Reduces volume in the shoe Improves support in the heel area 4 mm elevation for better position Self-adhesive for easy application Ideal for ski boots and sports shoes Product details Product: Sidas Heel Lifter Hard Height: 4 mm Feature: self-adhesive Function: volume reduction and stabilization Field of application Ski boots Boot fitting Sports shoes Optimization of the fit FAQ What is a heel lifter used for? It reduces the volume in the shoe and improves support in the heel area. How is the lifter applied? Simply remove the protective film and stick the pad in the heel area. For which shoes is it suitable? It is suitable for ski boots as well as for many other sports shoes. What effect does the 4 mm elevation have? It improves the fit and can optimize the pressure distribution in the shoe.

Protect your expensive goggles from scratches with the Airwing - Switzerland ski goggle cover. The protective cover has an elastic strap and is compatible with all ski goggles.

LENZ HEAT VEST HEAT VEST 1.0 Men The heated vest from Lenz for cold days outdoors, the heated vest can be operated with all Lenz Smart batteries. Regularfit Stretchable material, the Lenz heating vest should fit close to the body for optimum heat dissipation from the heating elements. Our heat vest 1.0 has been tested under the toughest conditions. CONTROL THE HEATING VEST WITH YOUR SMARTPHONE With the Lenz heat app for smartphones, the heat setting of the Lenz heating vest can be regulated quickly and easily. It also provides an overview of the current charge status of all batteries. Breathable vest with 2 integrated heating elements in the kidney and back area Heat output can be regulated via 3 levels, by smartphone, manually or via remote control Fits under any existing clothing system thanks to the minimum volume Perfect moisture transport and short drying time Wind and water repellent and abrasion resistant (no peeling) Package contents: 2 rechargeable batteries rcB 1800 global charger with charge indicator 1 Lenz heating vest heat vest 1.0 Outer fabric: 84 % polyamide, 16 % elastane Inner fabric: 100 % polyester

The Head Neves Pro 5K Kore L is the latest goggle in the HEAD collection and is packed full of features. The new laminated double lens not only increases your field of vision by 15% compared to conventional double lenses, but also optimizes protection against fogging and reduces the lens flare effect. The unrestricted field of vision is supported by our new 5K technology, which enhances contrast and increases color brilliance. The Head Neves Pro 5K Kore L is available in three sizes, Small, Medium and Large. Technical data Head Neves Pro 5K Kore L: Toric lensToric lenses have a curvature that prevents optical distortion.Laminated Double Lens LDLBy bonding the inner lens to the outer lens in a lamination process, a gap between the two lenses is avoided. This increases the field of vision by 15%. A special anti-fog coating ensures clear vision in all conditions.UV 400 & Anti-FogUV 400 & Anti-Fog coating describes the high UV protection of HEAD lenses and their ability to minimize fogging. The light on the mountain is intense, so you need the best possible protection and anti-fog properties to ensure the best vision.5K LensThe new 5K lens technology has been developed to improve your vision on the mountain. It's designed to improve contrast and increase color vibrancy by filtering specific wavelengths of the visual light spectrum, revealing more detail and ensuring a safer experience on the snowLearn moreExtremely wide field of visionHEAD goggles with an extra-wide field of vision allow racers to assume lower crouch positions without disturbing vision restrictions - an advantage that is particularly aerodynamically positive.3-layer foam paddingThe dual-density comfort foam with microfleece consists of bonded foam and is lined with soft fleece for additional comfort. The two foams serve different purposes, including anti-fogging, climate control and cushioning, while the fleece forms the ideal comfort layer between goggles and skin.Venting FoamThe venting foam overlay allows the exchange of air, heat and moisture. When used in our goggles, it prevents fogging and creates the ideal climate inside the goggles.Replaceable lensThese lenses can be easily replaced if the light conditions change or if they are damaged. This increases the longevity of the frame and allows flexibility.

The Head Neves L is the latest goggle in the HEAD collection and is packed full of features. The new laminated double lens not only increases your field of vision by 15% compared to conventional double lenses, but also optimizes protection against fogging and reduces the lens flare effect. The unrestricted field of vision is supported by our new technology, which enhances contrast and increases color brilliance. The Head Neves L is available in three sizes, Small, Medium and Large. Technical data Head Neves L: Toric lenses have a curvature that prevents optical distortion. By bonding the inner lens to the outer lens in a lamination process, a gap between the two lenses is avoided. This increases the field of vision by 15%. A special anti-fog coating ensures clear vision in all conditions. UV 400 & Anti-Fog coating describes the high UV protection of HEAD lenses and their ability to minimize fogging. The light on the mountain is intense, so you need the best possible protection and anti-fog properties to ensure the best vision. HEAD goggles with an extra-wide field of vision allow racers to take up lower crouching positions without disturbing their view - an advantage that is particularly aerodynamically positive. The dual-density comfort foam with microfleece consists of bonded foam and is lined with soft fleece for additional comfort. The two foams serve different purposes, including anti-fogging, climate control and cushioning, while the fleece forms the ideal comfort layer between goggles and skin. The venting foam overlay allows for the exchange of air, heat and moisture. When used in our goggles, it prevents fogging and creates the ideal climate inside the goggles.

The heated 3D insoles have powerful heating elements for real thermal comfort, but also optimum support and cushioning for the foot. Compatible with batteries from the Sidas range.without batteryPlease note that this is an older system and batteries are no longer available.Please only order if you already have a battery.

Heating insole Therm-ic Insole Heat in anatomical 3D shape for optimum support. Stable support function for optimum pressure distribution in the boot. The high-quality heating elements maintain the optimum temperature of the foot. Thanks to the cable on the outside, the insole can be fitted perfectly into any boot. EVA foam structure. Only compatible with the Therm-ic C-Pack battery range from 17/18. Scope of delivery: 1 pair of Therm-ic Insole Heat 3D with cable