Ski boot sole protection

More edge grip, more direct power transmission and a sportier stance height: The Dalbello 3 mm Lifter Kit was developed for all DRS WC and DRS models with 97 mm last width developed. The set contains precisely fitting 3 mm plates including screw set and is the clean solution to increase the performance and precision of your DRS shoes. Key Features Compatibility: All Dalbello DRS WC & DRS models with 97 mm last width Performance update: +3 mm stand height for faster edge changes & more pressure on the shovel Perfect fit: Model-specific plates incl. complete screw sets Robust: Precisely manufactured lifters for long-lasting racing performance Scope of delivery 1 set of 3 mm lifter plates (for both shoes) Complete screw set Mounting instructions Mounting & Note For the initial assembly the shoe soles must be professionally milled milled. We offer this service - simply contact us by e-mail. Fitting should only be carried out by qualified workshops. After changes to the sole thickness, the checking for conformity with the standard (ISO 5355/GripWalk) and a binding adjustment (Z-value/AFD height) is mandatory. FAQ Do the lifters fit all DRS models? The kit is suitable for DRS WC and DRS models with 97 mm slat width designed. Separate kits are required for other slat widths/lines. Can I fit the lifts myself? We do not recommend not self-assembly. The soles must be milled and the bindings readjusted. Please contact a specialist workshop. Does the binding setting change? Yes, after lifting, the AFD height, pre-pressing and Z-value must be checked or adjusted to ensure standard-compliant release. What are the noticeable advantages of the 3 mm lifter? More leverage on the edge, more precise initiation, more stable guidance at speed and in icy passages - especially in racing and sporty piste skiing.

More edge grip, more direct power transmission and a sportier stance height: The Dalbello 5 mm Lifter Kit was developed for all DRS WC and DRS models with 97 mm last width developed. The set contains precisely fitting 3 mm plates including screw set and is the clean solution to increase the performance and precision of your DRS shoes. Key Features Compatibility: All Dalbello DRS WC & DRS models with 97 mm last width Performance update: +3 mm stand height for faster edge changes & more pressure on the shovel Perfect fit: Model-specific plates incl. complete screw sets Robust: Precisely manufactured lifters for long-lasting racing performance Scope of delivery 1 set of 5 mm lifter plates (for both shoes) Complete screw set Mounting instructions Mounting & Note For the initial assembly the shoe soles must be professionally milled milled. We offer this service - simply contact us by e-mail. Fitting should only be carried out by qualified workshops. After changes to the sole thickness, the Check for conformity to the standard and a binding adjustment (Z-value/AFD height) is mandatory. FAQ Do the lifters fit all DRS models? The kit is suitable for DRS WC and DRS models with 97 mm slat width designed. Separate kits are required for other slat widths/lines. Can I fit the lifts myself? We do not recommend not self-assembly. The soles must be milled and the bindings readjusted. Please contact a specialist workshop. Does the binding setting change? Yes, after lifting, the AFD height, pre-pressing and Z-value must be checked or adjusted to ensure standard-compliant release. What are the noticeable advantages of the 5 mm lifter? More leverage on the edge, more precise initiation, more stable guidance at speed and in icy passages - especially in racing and sporty piste skiing.

The Dalbello sole plates Heel & Toe Alpin are replacement soles for various Dalbello ski boot models. They ensure optimum grip and precise power transmission between boot and binding. The set consists of heel and toe plates and is compatible with several Dalbello models. Compatibility & fit The sole plates are suitable for the following models: BOSS IL Moro RAMPA JAKK JR 2 (from size 225 mm) Product details Set: 1 pair (heel & toe plate incl. screws) Size: 225-325 mm Standard: Alpine ISO 5355 Use: Spare part to restore binding compatibility Material: High-quality, abrasion-resistant plastic for a long service life Fitting instructions Assembly should be carried out by a specialist dealer or service technician to ensure correct positioning and safe functioning of the ski boots. A binding adjustment check is recommended after replacement. FAQ Do the sole plates also fit GripWalk ski boots? No, these sole plates comply with the Alpine standard (ISO 5355) and are not compatible with GripWalk bindings. Can I replace just one heel plate? Yes, it is possible, but it is recommended to replace both plates at the same time in order to maintain a consistent feel. How do I know if my soles need replacing? If the contact surfaces are worn or uneven, they should be replaced to ensure safety in the binding.

The Dalbello Heel & Toe Alpine sole plates are high-quality spare parts for ski boots from the DS, Veloce, Panterra, JR 4, FXR and Cabrio. They ensure the optimum connection between ski boot and binding and guarantee precise power transmission on the piste. Compatibility & area of application These replacement soles are suitable for ski boots with a size from 225-345 mm suitable. They comply with the Alpine standard ISO 5355 and are intended exclusively for use with alpine bindings. Compatible models Dalbello DS Dalbello Veloce Dalbello Panterra Dalbello JR 4 Dalbello FXR Dalbello Convertible Product details Set: 1 pair (heel and toe plates) Size: 225-345 mm Standard: Alpine ISO 5355 Material: Durable, abrasion-resistant plastic Usage: Spare part to restore Alpine binding compatibility Fitting instructions The sole plates should be fitted by a specialist dealer or service technician to ensure the correct fit and function. After replacement, a binding check is recommended to verify safety. FAQ Can I use these sole plates for GripWalk bindings? No, these soles comply with the Alpine standard (ISO 5355) and are not suitable for GripWalk bindings. How do I know if I need new sole plates? If the contact surfaces are worn, uneven or damaged, the sole plates should be replaced to ensure safety and optimum power transmission. Can I replace just the heel or toe plate? It is possible, but it is recommended to always replace both plates in the set to maintain a consistent feel.

The Salomon XMAX GHOST GRIPPAD KIT ISO535 is the matching replacement sole set for various Salomon ski boot models with ISO 535 standard. The robust grip pads provide optimum grip and stability when walking – ideal as replacement plates, when the original soles are worn out. Replacement plates for your Salomon performance ski boots Compatible with Salomon XMAX & GHOST ski boots with ISO 535 Includes heel and toe plates (front & rear) Easy replacement with screw fastening Increases the lifespan of your ski boots Provides for secure footing & better grip when walking Perfect for getting your Salomon ski boot back in shape – with original replacement soles for the best grip and comfort on any surface.

The Lange Lifter Kit Maxi Grip RS 5mm is the perfect choice for racers who want to optimize their stance height and increase edge pressure. The 5 mm thick sole not only improves power transmission, but also offers more safety when walking on hard surfaces thanks to its grippy surface - ideal for racing.Lange Lifter Kit Maxi Grip RS 5mm - Extra grip for maximum racing performance Important: Installation requires the ski boot shell to be milled and should only be carried out by a specialist workshop. The set contains all screws required for mounting. Product details: Suitable for Lange RS ski boots Height: 5 mm to improve position and pressure distribution Grippy surface for better grip Mounting only possible with milled shell Delivery incl. mounting screws Equip your ski boots for maximum racing performance - get the best out of your setup with the Lange Lifter Kit Maxi Grip RS 5mm!

The Lange Lifter Kit RS 5mm in red is the ideal solution for racers who want to optimize their ski boots. The 5 mm rise ensures improved power transmission and finer steering impulses - exactly what is needed in racing. This model comes without a grip structure and is therefore especially designed for use in a purely competitive environment. Important: Assembly requires precise milling of the ski boot sole by a specialist workshop. The screws required for secure fastening are included in the scope of delivery. Product details: Suitable for Lange RS ski boots 5 mm increase for improved standing height and edge pressure Without grip - smooth design for racing use Color: Red Installation only possible by milling the shell Incl. mounting screws Perfect for athletes who pay attention to every detail: The Lange Lifter Kit RS 5mm Red - for maximum performance at the start and on the track.

Ski boots have to be comfortable. But now they should also be equipped with technologies that not only make walking easier, but also safer. Nordica Gripwalk® soles have a rockered profile that is compatible with all Marker Gripwalk® bindings and all similar systems available on the market. Nordica Gripwalk® soles have a 9523 geometry and should not be used in combination with traditional alpine bindings. Suitable for models including screws: Nordica Promachine SeriesNordica Speedmachine Series Nordica Sportmachine Series Nordica Strider Series

HEAD GripWalk Kit GW KORE - More comfort and safety With the HEAD GripWalk Kit GW KORE you get an improved sole solution for alpine ski boots. GripWalk provides better grip when walking and has now been recognized as the new standard by almost all major ski boot and binding manufacturers. More walking comfort: Slightly upturned front section makes walking easier. Better traction: Ribbed rubber tread on the toe and heel for better grip, even on icy surfaces. Binding compatibility: Suitable for all GripWalk-certified bindings. Optimized safety: Hard contact surface for precise grip and secure release in the binding. Compatible with various HEAD KORE ski boot models: Model year Compatible ski boots 2024/25 KORE 130 LV GW, KORE 130 MV GW, KORE 110 MV GW, KORE 95 W MV GW 2023/24 KORE RS 130 GW, KORE 120 GW, KORE RS 105 W GW, KORE 110 GW, KORE 95 W GW, KORE 90 TEAM GW 2022/23 KORE RS 130 GW, KORE 120 GW, KORE RS 105 W GW, KORE 110 GW, KORE 95 W GW, KORE 90 TEAM GW

Non-slip Vibram soles set for Head Raptor shell including screws. Please note that the shell must be reworked if you have not yet mounted one and keep the ISO standard for the binding. Scope of delivery Head SET HEEL/TOE TAP R/OVERKILL VIBRAM A pair of Vibram soles/heels 7mm rise for Head Raptor 140 WCR All screws included

5mm sole lifter set for Head Raptor WCR Grip shell including screws. Please note that the shell must be reworked if you have not yet mounted one and keep the ISO standard for the binding. Scope of delivery Head WCR SET 1 PR HEEL/TOE TAP GRIP 5 MM 5mm soles for a pair of ski boots All screws included

GripWalk is a new standard for the heels of alpine ski boots and for the bindings into which they should fit. Almost all major manufacturers have now agreed on this new standard. In contrast to classic ski boot soles, GripWalk soles are slightly raised at the front, but still have a protruding toe piece. In addition, the GripWalk soles are equipped with a heavily ribbed rubber profile at the front and rear, similar to a touring boot, but also have a hard part that is in direct contact with the binding. In contrast to classic ski boot soles, the GripWalk soles are slightly raised at the front, but still have a protruding toe piece.Especially when you have to cross icy areas, the slippery and stiff heel plates of classic alpine boots are just too dangerous.Disadvantages of Gripwalk None really.However, boots with the new GripWalk soles are no longer compatible with old-style alpine bindings, as these require a largely smooth and hard front sole in order to release safely. Suitable for models: Raptor WCR 120SFormula 100-130SRaptor WCR 115WRaptor WCR 95WFormula 85-105W

The Salomon S/Series Alpine Pads are replacement soles for your Salomon ski boots. They ensure optimum grip and safety on the slopes by compensating for the wear of the original soles and ensuring compatibility with standard alpine bindings (ISO 5355). Compatibility Salomon S/Pro Salomon S/Max Salomon S/Max 65 Salomon S/Race 65 Salomon S/Race 70 Product details Set consisting of front and rear soles Complies with the ISO 5355 standard for alpine bindings Easy replacement for extended service life of your ski boots Made from robust plastic for a long service life Please note These pads are only compatible with the models listed above. Please check the model designation of your ski boots before purchasing to ensure the correct fit.

Compatible with the following alpine ski boot models: S/Pro / S/Max / S/Max 65 / S/Race 65 / S/Race 70.

3mm sole lifter set for Head Raptor WCR shell including screws. Please note that the shell must be reworked if you have not yet mounted one and keep the ISO standard for the binding. Scope of delivery Head WCR SET 1 PR HEEL/TOE TAP RACING 3 MM 3mm soles for a pair of ski boots All screws included

5mm sole lifter set for Head Raptor WCR shell including screws. Please note that the shell must be reworked if you have not yet mounted one and keep the ISO standard for the binding. Scope of delivery Head 1 PR HEEL/TOE Lifter KIT RAPTOR WCR 5 MM 5mm soles for a pair of ski boots All screws included

HEAD soles Vector Nexo Edge - replacement soles for HEAD ski boots The HEAD soles for Vector, Nexo and Edge boots are the perfect replacement to renew your ski boots and maintain safety and performance on the slopes. The complete set includes soles for the front and heel area including matching screws for easy installation. Suitable for the following HEAD ski boot models: 2021 / 22: NEXO LYT, EDGE LYT 2020 / 21: VECTOR, NEXO LYT, EDGE LYT 2019 / 20: Vector RS, Advant Edge, VECTOR, NEXO LYT, EDGE LYT, ADVANT EDGE 2018 / 19: Vector RS, NEXO LYT, Advant Edge 2017 / 18: VECTOR EVO, Advant Edge Advantages of the HEAD replacement soles: Longer service life - Replace worn soles and extend the durability of your ski boots. Optimum safety - Better grip in the binding system for a stable hold. Easy to fit - Supplied with matching screws for quick and easy installation. Keep your ski boots in top shape and replace the soles with the matching complete set. Discover the HEAD Vector Nexo Edge soles now!

Non-slip Vibram soles set for Head Raptor WCR shell from season 21/22 including screws. Please note that the shell must be reworked if you have not yet mounted one and keep the ISO standard for the binding. Scope of delivery Head SET HEEL/TOE TAP R/OVERKILL VIBRAM Vibram soles for a pair of ski boots All screws included

One assembly of ski boot lifters in 3 mm, 5 mm or 7 mm Vibram brings clear advantages: The racing boots are protected when walking on hard surfaces and are not scratched. At the same time, the height is increased - a decisive factor, especially when racing. The 3 mm and 5 mm versions are FIS-approved and provide a more direct feel and more leverage in turns. For precise adjustment, we use a special milling machine that sets the ski boot nose and heel exactly to the desired height. Included in the service Professional fitting of the lift plates Precise milling to the correct height Processing time2-4 working days Return shipment of your ski boots - we automatically calculate the costs for this in the shopping cart according to your destination country Important information for customers outside Switzerland The shipping of the ski boots to us is at your own expense. Please not forget to order the desired lift plates in 3 mm, 5 mm or 7 mm at the same time - they are not included in the price. Requirements for processing The ski boot soles must be in good condition and must not show any rough damage For customers residing in Switzerland, there is a separate article that already includes return shipping.

With the Ski Boot Tractions Yellow you can walk safely and comfortably in your ski boots. Their beveled shape at the ends makes it easier for the foot to roll, while the asymmetrical groove profile guarantees safe walking on snow. Flexible and resistant rubber. Internal structure for a better grip on your shoes. One size fits all Makes walking with your ski boots easier Protects the outsole of your boots Size adjustment: Determine the length in mm of your ski boots. Adjust the Ski Boot Tractions to the appropriate size (round down). The tip of the arrow indicates the selected size. Screw on using a Phillips screwdriver. Fastening to the boot: Put the Ski Boot Traction on by first attaching it to the front of the boot, then pulling it back and adjusting it at the heel.

With the originals Cat Tracks Ski protect your ski boots from damage that could be caused by a false release of the binding. The easy to mount ski boot rubber soles help even on icy surfaces and let you walk safely to the ski lift. Keep your boot soles like new and avoid unsafe wear and tear Protect ski boot and binding compatibility Slip-on sole improves traction and provides excellent walking comfort Fits neatly in your pocket or under the snow cuff of your ski pants Used by professional athletes

Sidas Walk Traction: Your reliable partner on ice and snow Are you looking for a reliable solution to stay safe on snowy and icy trails? Sidas Walk Traction offers you optimum grip and traction, even in the toughest conditions. These non-slip overshoes are tested and recommended by world-renowned cross-country skiing champion Maurice Manifi. Why choose Sidas Walk Traction? Versatile sizes: Available in S, M, L, XL - perfect for any boot size. S 36-38 | M 39-41 | L 42-44 | XL 45-47 Certified safety: Complies with the essential requirements of Directive 89/686 in terms of comfort, strength and harmlessness. High performance: Excellent slip resistance with a coefficient of friction of 0.40. Restrictions and care instructions Please note that the Sidas Walk Traction are designed as personal protective equipment for non-professional use. They are not suitable for use on glaciers or as a replacement for alpine climbing crampons. Avoid using them on unsuitable footwear such as soft shoes, sandals or shoes with high heels. After use, they should be rinsed with water and left to air dry. Store them in a dry place away from heat or UV light.

5mm Sole Orange Lifter Kit including galvanized/hardened steel screws. Provides more control and better power transmission when skiing.These fit all ski boot models, please note that the shell must be reworked if you have not yet mounted one to keep the ISO standard for the binding. We offer this in our store, call us for a boot fitting appointment. Scope of delivery 5mm Lifter Kit 5mm soles for a pair of ski boots 30 hardened steel/galvanized screws

5mm sole lifter kit including galvanized/hardened steel screws. Provides more control and better power transmission when skiing.These fit all ski boot models, please note that the shell must be reworked if you have not yet mounted one to keep the ISO standard for the binding. We offer this in our store, call us for a boot fitting appointment. Scope of delivery 5mm Lifter Kit 5mm soles for a pair of ski boots 30 hardened steel/galvanized screws

Fitting ski boot lifters in 3mm, 5mm or 7mm Vibram has many advantages. On the one hand, the soles of the racing boots are not damaged or scratched by running on hard surfaces, and they also help to increase the standing height. The 3mm and 5mm versions are approved and accepted by the FIS. This gives you more height when cornering and the ski is more direct to ski. For this purpose we have a special cutterwhich is responsible for lowering the ski boot nose and heels. The Milling and mounting of racing plates Service includes: Shipping and return of ski boots in Switzerland. Mounting of plates. Milling to the desired heights. Processing time 2-4 working days. After ordering, you will receive a return barcode from the post office by e-mail for shipping the ski boots. Please do not forget to order the desired lifts! Requirements for processing Ski boot soles must not be grossly damaged.

With the Ski Boot Tractions Green you can walk safely and comfortably in your ski boots. Their beveled shape at the ends makes it easier for the foot to roll, while the asymmetrical groove profile guarantees safe walking on snow. Flexible and resistant rubber. Internal structure for a better grip on your shoes. One size fits all Makes walking with your ski boots easier Protects the outsole of your boots Size adjustment: Determine the length in mm of your ski boots. Adjust the Ski Boot Tractions to the appropriate size (round down). The tip of the arrow indicates the selected size. Screw on using a Phillips screwdriver. Fastening to the boot: Put the Ski Boot Traction on by first attaching it to the front of the boot, then pulling it back and adjusting it at the heel.

With the Ski Boot Tractions Blue you can walk safely and comfortably in your ski boots. Their beveled shape at the ends makes it easier for the foot to roll, while the asymmetrical groove profile guarantees safe walking on snow. Flexible and resistant rubber. Internal structure for a better grip on your shoes. One size fits all Makes walking with your ski boots easier Protects the outsole of your boots Size adjustment: Determine the length in mm of your ski boots. Adjust the Ski Boot Tractions to the appropriate size (round down). The tip of the arrow indicates the selected size. Screw on using a Phillips screwdriver. Fastening to the boot: Put the Ski Boot Traction on by first attaching it to the front of the boot, then pulling it back and adjusting it at the heel.

With the original Cat Tracks Ski protect your ski boots from damage that could be caused by a false release of the binding. The easy to mount ski boot rubber soles help even on icy surfaces and let you walk safely to the ski lift. Now new in neon yellow! Keep your boot soles like new and avoid unsafe wear and tear Protect ski boot and binding compatibility Slip-on sole improves traction and provides excellent walking comfort Fits neatly in your pocket or under the snow cuff of your ski pants Used by professional athletes

5mm Sole Black Lifter Kit including galvanized/hardened steel screws. Provides more control and better power transmission when skiing.These fit all ski boot models, please note that the shell must be reworked if you have not yet mounted one to keep the ISO standard for the binding. We offer this in our store, call us for a boot fitting appointment. Scope of delivery 5mm Lifter Kit 5mm soles for a pair of ski boots 30 hardened steel/galvanized screws

With the Ski Boot Traction Black you can walk safely and comfortably in your ski boots. Their beveled shape at the ends makes it easier for the foot to roll, while the asymmetrical groove profile guarantees safe walking on snow. Flexible and resistant rubber. Internal structure for a better grip on your shoes. One size fits all Makes walking with your ski boots easier Protects the outsole of your boots Size adjustment: Determine the length in mm of your ski boots. Adjust the Ski Boot Tractions to the appropriate size (round down). The tip of the arrow indicates the selected size. Screw on using a Phillips screwdriver. Fastening to the boot: Put the Ski Boot Traction on by first attaching it to the front of the boot, then pulling it back and adjusting it at the heel.

5mm Sole Orange Lifter Kit including galvanized/hardened steel screws. Provides more control and better power transmission when skiing.These fit all ski boot models, please note that the shell must be reworked if you have not yet mounted one to keep the ISO standard for the binding. We offer this in our store, call us for a boot fitting appointment. Scope of delivery 5mm Lifter Kit 5mm soles for a pair of ski boots 30 hardened steel/galvanized screws