Sidas Skiboot Traction Black

With the Ski Boot Tractions Yellow you can walk safely and comfortably in your ski boots. Their beveled shape at the ends makes it easier for the foot to roll, while the asymmetrical groove profile guarantees safe walking on snow. Flexible and resistant rubber. Internal structure for a better grip on your shoes. One size fits all Makes walking with your ski boots easier Protects the outsole of your boots Size adjustment: Determine the length in mm of your ski boots. Adjust the Ski Boot Tractions to the appropriate size (round down). The tip of the arrow indicates the selected size. Screw on using a Phillips screwdriver. Fastening to the boot: Put the Ski Boot Traction on by first attaching it to the front of the boot, then pulling it back and adjusting it at the heel.

With the Ski Boot Tractions Green you can walk safely and comfortably in your ski boots. Their beveled shape at the ends makes it easier for the foot to roll, while the asymmetrical groove profile guarantees safe walking on snow. Flexible and resistant rubber. Internal structure for a better grip on your shoes. One size fits all Makes walking with your ski boots easier Protects the outsole of your boots Size adjustment: Determine the length in mm of your ski boots. Adjust the Ski Boot Tractions to the appropriate size (round down). The tip of the arrow indicates the selected size. Screw on using a Phillips screwdriver. Fastening to the boot: Put the Ski Boot Traction on by first attaching it to the front of the boot, then pulling it back and adjusting it at the heel.

With the Ski Boot Tractions Blue you can walk safely and comfortably in your ski boots. Their beveled shape at the ends makes it easier for the foot to roll, while the asymmetrical groove profile guarantees safe walking on snow. Flexible and resistant rubber. Internal structure for a better grip on your shoes. One size fits all Makes walking with your ski boots easier Protects the outsole of your boots Size adjustment: Determine the length in mm of your ski boots. Adjust the Ski Boot Tractions to the appropriate size (round down). The tip of the arrow indicates the selected size. Screw on using a Phillips screwdriver. Fastening to the boot: Put the Ski Boot Traction on by first attaching it to the front of the boot, then pulling it back and adjusting it at the heel.

One assembly of ski boot lifters in 3 mm, 5 mm or 7 mm Vibram brings clear advantages: The racing boots are protected when walking on hard surfaces and are not scratched. At the same time, the height is increased - a decisive factor, especially when racing. The 3 mm and 5 mm versions are FIS-approved and provide a more direct feel and more leverage in turns. For precise adjustment, we use a special milling machine that sets the ski boot nose and heel exactly to the desired height. Included in the service Professional fitting of the lift plates Precise milling to the correct height Processing time2-4 working days Return shipment of your ski boots - we automatically calculate the costs for this in the shopping cart according to your destination country Important information for customers outside Switzerland The shipping of the ski boots to us is at your own expense. Please not forget to order the desired lift plates in 3 mm, 5 mm or 7 mm at the same time - they are not included in the price. Requirements for processing The ski boot soles must be in good condition and must not show any rough damage For customers residing in Switzerland, there is a separate article that already includes return shipping.

The Dalbello sole plates Heel & Toe Alpin are replacement soles for various Dalbello ski boot models. They ensure optimum grip and precise power transmission between boot and binding. The set consists of heel and toe plates and is compatible with several Dalbello models. Compatibility & fit The sole plates are suitable for the following models: BOSS IL Moro RAMPA JAKK JR 2 (from size 225 mm) Product details Set: 1 pair (heel & toe plate incl. screws) Size: 225-325 mm Standard: Alpine ISO 5355 Use: Spare part to restore binding compatibility Material: High-quality, abrasion-resistant plastic for a long service life Fitting instructions Assembly should be carried out by a specialist dealer or service technician to ensure correct positioning and safe functioning of the ski boots. A binding adjustment check is recommended after replacement. FAQ Do the sole plates also fit GripWalk ski boots? No, these sole plates comply with the Alpine standard (ISO 5355) and are not compatible with GripWalk bindings. Can I replace just one heel plate? Yes, it is possible, but it is recommended to replace both plates at the same time in order to maintain a consistent feel. How do I know if my soles need replacing? If the contact surfaces are worn or uneven, they should be replaced to ensure safety in the binding.

The Dalbello Heel & Toe Alpine sole plates are high-quality spare parts for ski boots from the DS, Veloce, Panterra, JR 4, FXR and Cabrio. They ensure the optimum connection between ski boot and binding and guarantee precise power transmission on the piste. Compatibility & area of application These replacement soles are suitable for ski boots with a size from 225-345 mm suitable. They comply with the Alpine standard ISO 5355 and are intended exclusively for use with alpine bindings. Compatible models Dalbello DS Dalbello Veloce Dalbello Panterra Dalbello JR 4 Dalbello FXR Dalbello Convertible Product details Set: 1 pair (heel and toe plates) Size: 225-345 mm Standard: Alpine ISO 5355 Material: Durable, abrasion-resistant plastic Usage: Spare part to restore Alpine binding compatibility Fitting instructions The sole plates should be fitted by a specialist dealer or service technician to ensure the correct fit and function. After replacement, a binding check is recommended to verify safety. FAQ Can I use these sole plates for GripWalk bindings? No, these soles comply with the Alpine standard (ISO 5355) and are not suitable for GripWalk bindings. How do I know if I need new sole plates? If the contact surfaces are worn, uneven or damaged, the sole plates should be replaced to ensure safety and optimum power transmission. Can I replace just the heel or toe plate? It is possible, but it is recommended to always replace both plates in the set to maintain a consistent feel.

The Nordica HF / Cruise / Speedmachine Jr 5355 Xtragrip Soles are original replacement sole plates for ski boots with Alpine standard ISO 5355. They are suitable for all HF, Cruise, Dobermann Jr and Speedmachine Jr models and once again ensure a secure stance, clean release values and a standard-compliant fit in the binding. The set consists of forefoot and heel plates including mounting material. Ideal if the original soles are worn out or the functionality of the ski boots needs to be fully restored. Original Nordica spare part: Perfect fit for HF, Cruise, Dobermann Jr and Speedmachine J ISO 5355 standard: For classic alpine bindings without GripWalk Complete set: Forefoot and heel plates including mounting material Xtragrip design: Secure footing when walking Longer service life: Ski boots fully ready for use again Technical data ProductNordica HF / Cruise / Speedmachine Jr 5355 Xtragrip Soles Item number08502200000 StandardISO 5355 Alpine Standard Compatible modelsHF, Cruise, Dobermann Jr, Speedmachine Jr Scope of delivery2x forefoot plates, 2x heel plates, mounting material ColorNeutral Seasons2019/2020 to 2026/2027FAQ

The Atomic CANTABLE DC Grip Pad 25–33.5 B are original replacement soles for Atomic Hawx ski boots from model year 2022 onward. They comply with the classic alpine standard ISO 5355 and are designed without GripWalk – ideal if you want to retrofit your ski boots to meet the standard for conventional alpine bindings. Worn-out ski boot soles affect stance, control, and the binding’s release performance. With these original Atomic soles, you restore the full functionality and safety of your Hawx ski boots. Atomic Cantable DC Grip Pad – ISO 5355 Alpine Sole Original Atomic replacement part: Perfect fit for Atomic Hawx models Without GripWalk: Classic alpine sole according to ISO 5355 Secure footing: Reliable power transfer in the binding Compatibility: For Atomic Hawx ski boots from season 2022 Size range: MP 25.0 to 33.5 Technical data Product1 pair Atomic CANTABLE DC Grip Pad incl. screws StandardISO 5355 alpine standard DesignWithout GripWalk Size rangeMP 25.0 – 33.5 Compatible modelsAtomic Hawx from model year 2022 ApplicationAlpine skiing FAQ Are these soles GripWalk compatible? No, these soles are deliberately designed without GripWalk and comply with the ISO 5355 alpine standard. Which ski boots do the soles fit? They fit Atomic Hawx ski boots from model year 2022 in size range MP 25.0 to 33.5. Why should I replace ski boot soles? Worn soles affect stance, safety, and the correct release behavior of the binding. Can I fit the soles myself? Installation is possible, however we recommend installation by a specialist dealer to ensure correct binding settings.

5mm Sole Lifter Set Black for Head Raptor WCR Grip shell including screws. Please note that the shell must be reworked if you have not yet mounted one and keep the ISO standard for the binding.Scope of delivery Head WCR SET 1 PR HEEL/TOE TAP GRIP 5 MM 5mm soles for a pair of ski boots All screws included

With the Tecnica Mach DIN Dual Density Sole Kit (LV+MV+HV) you can replace worn ski boot soles easily and reliably. The ISO 5355 sole kit is suitable for Mach1, Mach Sport and Cochise models – with or without DYN. Tecnica Mach DIN Dual Density Sole Kit – ISO 5355 replacement soles Worn soles impair the safe function of your binding. With this original Dual Density Sole Kit, you can bring your ski boots back to DIN standard according to ISO 5355. The dual-density construction combines stability with durability and ensures precise grip in alpine bindings. Suitable for LV, MV and HV variants. Compatible models Mach1 Mach Sport Cochise Models with or without DYN Compatible seasons 2017 / 2018 2018 / 2019 2019 / 2020 2020 / 2021 2021 / 2022 2022 / 2023 2023 / 2024 2024 / 2025 2025 / 2026 2026 / 2027 Product details Standard: ISO 5355 (Alpine DIN) Dual Density Construction Suitable for LV, MV and HV Original Tecnica spare part FAQ What do I need the sole kit for? For replacing worn ISO 5355 alpine soles on compatible Tecnica ski boots. Is the kit suitable for GripWalk? No, these are ISO 5355 DIN alpine soles. Does it fit all Mach models? It is suitable for Mach1, Mach Sport and Cochise models of the mentioned seasons. Can I change the soles myself? Replacement is generally possible, but we recommend installation by a specialist dealer.