Dalbello Heel + Toe Alpine sole plates DS, Veloce & Panterra

The Dalbello sole plates Heel & Toe Alpin are replacement soles for various Dalbello ski boot models. They ensure optimum grip and precise power transmission between boot and binding. The set consists of heel and toe plates and is compatible with several Dalbello models. Compatibility & fit The sole plates are suitable for the following models: BOSS IL Moro RAMPA JAKK JR 2 (from size 225 mm) Product details Set: 1 pair (heel & toe plate incl. screws) Size: 225-325 mm Standard: Alpine ISO 5355 Use: Spare part to restore binding compatibility Material: High-quality, abrasion-resistant plastic for a long service life Fitting instructions Assembly should be carried out by a specialist dealer or service technician to ensure correct positioning and safe functioning of the ski boots. A binding adjustment check is recommended after replacement. FAQ Do the sole plates also fit GripWalk ski boots? No, these sole plates comply with the Alpine standard (ISO 5355) and are not compatible with GripWalk bindings. Can I replace just one heel plate? Yes, it is possible, but it is recommended to replace both plates at the same time in order to maintain a consistent feel. How do I know if my soles need replacing? If the contact surfaces are worn or uneven, they should be replaced to ensure safety in the binding.

One assembly of ski boot lifters in 3 mm, 5 mm or 7 mm Vibram brings clear advantages: The racing boots are protected when walking on hard surfaces and are not scratched. At the same time, the height is increased - a decisive factor, especially when racing. The 3 mm and 5 mm versions are FIS-approved and provide a more direct feel and more leverage in turns. For precise adjustment, we use a special milling machine that sets the ski boot nose and heel exactly to the desired height. Included in the service Professional fitting of the lift plates Precise milling to the correct height Processing time2-4 working days Return shipment of your ski boots - we automatically calculate the costs for this in the shopping cart according to your destination country Important information for customers outside Switzerland The shipping of the ski boots to us is at your own expense. Please not forget to order the desired lift plates in 3 mm, 5 mm or 7 mm at the same time - they are not included in the price. Requirements for processing The ski boot soles must be in good condition and must not show any rough damage For customers residing in Switzerland, there is a separate article that already includes return shipping.

More edge grip, more direct power transmission and a sportier stance height: The Dalbello 3 mm Lifter Kit was developed for all DRS WC and DRS models with 97 mm last width developed. The set contains precisely fitting 3 mm plates including screw set and is the clean solution to increase the performance and precision of your DRS shoes. Key Features Compatibility: All Dalbello DRS WC & DRS models with 97 mm last width Performance update: +3 mm stand height for faster edge changes & more pressure on the shovel Perfect fit: Model-specific plates incl. complete screw sets Robust: Precisely manufactured lifters for long-lasting racing performance Scope of delivery 1 set of 3 mm lifter plates (for both shoes) Complete screw set Mounting instructions Mounting & Note For the initial assembly the shoe soles must be professionally milled milled. We offer this service - simply contact us by e-mail. Fitting should only be carried out by qualified workshops. After changes to the sole thickness, the checking for conformity with the standard (ISO 5355/GripWalk) and a binding adjustment (Z-value/AFD height) is mandatory. FAQ Do the lifters fit all DRS models? The kit is suitable for DRS WC and DRS models with 97 mm slat width designed. Separate kits are required for other slat widths/lines. Can I fit the lifts myself? We do not recommend not self-assembly. The soles must be milled and the bindings readjusted. Please contact a specialist workshop. Does the binding setting change? Yes, after lifting, the AFD height, pre-pressing and Z-value must be checked or adjusted to ensure standard-compliant release. What are the noticeable advantages of the 3 mm lifter? More leverage on the edge, more precise initiation, more stable guidance at speed and in icy passages - especially in racing and sporty piste skiing.

More edge grip, more direct power transmission and a sportier stance height: The Dalbello 5 mm Lifter Kit was developed for all DRS WC and DRS models with 97 mm last width developed. The set contains precisely fitting 3 mm plates including screw set and is the clean solution to increase the performance and precision of your DRS shoes. Key Features Compatibility: All Dalbello DRS WC & DRS models with 97 mm last width Performance update: +3 mm stand height for faster edge changes & more pressure on the shovel Perfect fit: Model-specific plates incl. complete screw sets Robust: Precisely manufactured lifters for long-lasting racing performance Scope of delivery 1 set of 5 mm lifter plates (for both shoes) Complete screw set Mounting instructions Mounting & Note For the initial assembly the shoe soles must be professionally milled milled. We offer this service - simply contact us by e-mail. Fitting should only be carried out by qualified workshops. After changes to the sole thickness, the Check for conformity to the standard and a binding adjustment (Z-value/AFD height) is mandatory. FAQ Do the lifters fit all DRS models? The kit is suitable for DRS WC and DRS models with 97 mm slat width designed. Separate kits are required for other slat widths/lines. Can I fit the lifts myself? We do not recommend not self-assembly. The soles must be milled and the bindings readjusted. Please contact a specialist workshop. Does the binding setting change? Yes, after lifting, the AFD height, pre-pressing and Z-value must be checked or adjusted to ensure standard-compliant release. What are the noticeable advantages of the 5 mm lifter? More leverage on the edge, more precise initiation, more stable guidance at speed and in icy passages - especially in racing and sporty piste skiing.

The Nordica HF / Cruise / Speedmachine Jr 5355 Xtragrip Soles are original replacement sole plates for ski boots with Alpine standard ISO 5355. They are suitable for all HF, Cruise, Dobermann Jr and Speedmachine Jr models and once again ensure a secure stance, clean release values and a standard-compliant fit in the binding. The set consists of forefoot and heel plates including mounting material. Ideal if the original soles are worn out or the functionality of the ski boots needs to be fully restored. Original Nordica spare part: Perfect fit for HF, Cruise, Dobermann Jr and Speedmachine J ISO 5355 standard: For classic alpine bindings without GripWalk Complete set: Forefoot and heel plates including mounting material Xtragrip design: Secure footing when walking Longer service life: Ski boots fully ready for use again Technical data ProductNordica HF / Cruise / Speedmachine Jr 5355 Xtragrip Soles Item number08502200000 StandardISO 5355 Alpine Standard Compatible modelsHF, Cruise, Dobermann Jr, Speedmachine Jr Scope of delivery2x forefoot plates, 2x heel plates, mounting material ColorNeutral Seasons2019/2020 to 2026/2027FAQ

The Atomic CANTABLE DC Grip Pad 25–33.5 B are original replacement soles for Atomic Hawx ski boots from model year 2022 onward. They comply with the classic alpine standard ISO 5355 and are designed without GripWalk – ideal if you want to retrofit your ski boots to meet the standard for conventional alpine bindings. Worn-out ski boot soles affect stance, control, and the binding’s release performance. With these original Atomic soles, you restore the full functionality and safety of your Hawx ski boots. Atomic Cantable DC Grip Pad – ISO 5355 Alpine Sole Original Atomic replacement part: Perfect fit for Atomic Hawx models Without GripWalk: Classic alpine sole according to ISO 5355 Secure footing: Reliable power transfer in the binding Compatibility: For Atomic Hawx ski boots from season 2022 Size range: MP 25.0 to 33.5 Technical data Product1 pair Atomic CANTABLE DC Grip Pad incl. screws StandardISO 5355 alpine standard DesignWithout GripWalk Size rangeMP 25.0 – 33.5 Compatible modelsAtomic Hawx from model year 2022 ApplicationAlpine skiing FAQ Are these soles GripWalk compatible? No, these soles are deliberately designed without GripWalk and comply with the ISO 5355 alpine standard. Which ski boots do the soles fit? They fit Atomic Hawx ski boots from model year 2022 in size range MP 25.0 to 33.5. Why should I replace ski boot soles? Worn soles affect stance, safety, and the correct release behavior of the binding. Can I fit the soles myself? Installation is possible, however we recommend installation by a specialist dealer to ensure correct binding settings.

5mm Sole Lifter Set Black for Head Raptor WCR Grip shell including screws. Please note that the shell must be reworked if you have not yet mounted one and keep the ISO standard for the binding.Scope of delivery Head WCR SET 1 PR HEEL/TOE TAP GRIP 5 MM 5mm soles for a pair of ski boots All screws included

With the Tecnica Mach DIN Dual Density Sole Kit (LV+MV+HV) you can replace worn ski boot soles easily and reliably. The ISO 5355 sole kit is suitable for Mach1, Mach Sport and Cochise models – with or without DYN. Tecnica Mach DIN Dual Density Sole Kit – ISO 5355 replacement soles Worn soles impair the safe function of your binding. With this original Dual Density Sole Kit, you can bring your ski boots back to DIN standard according to ISO 5355. The dual-density construction combines stability with durability and ensures precise grip in alpine bindings. Suitable for LV, MV and HV variants. Compatible models Mach1 Mach Sport Cochise Models with or without DYN Compatible seasons 2017 / 2018 2018 / 2019 2019 / 2020 2020 / 2021 2021 / 2022 2022 / 2023 2023 / 2024 2024 / 2025 2025 / 2026 2026 / 2027 Product details Standard: ISO 5355 (Alpine DIN) Dual Density Construction Suitable for LV, MV and HV Original Tecnica spare part FAQ What do I need the sole kit for? For replacing worn ISO 5355 alpine soles on compatible Tecnica ski boots. Is the kit suitable for GripWalk? No, these are ISO 5355 DIN alpine soles. Does it fit all Mach models? It is suitable for Mach1, Mach Sport and Cochise models of the mentioned seasons. Can I change the soles myself? Replacement is generally possible, but we recommend installation by a specialist dealer.

With the Nordica HF GripWalk Soles, you can replace worn ski boot soles and improve both comfort and safety when walking. The GripWalk compatible soles offer better grip and higher traction on slippery and icy surfaces. Nordica HF GripWalk Soles – more grip and comfort when walking Especially on slippery paths around the valley station or when walking over ice, safe soles are crucial. The original Nordica GripWalk soles provide stable support and a noticeably more comfortable roll. The soles comply with the GripWalk / ISO 9523 standard and are easy to replace. This keeps your ski boots safely compatible with GripWalk bindings while also providing more comfort when walking. Compatible ski boots Nordica HF series (102 mm last width) Nordica The Cruise Nordica Speedmachine J Nordica Dobermann Jr Important note Not compatible with Nordica HF Pro 130 GW and Speedmachine Product details GripWalk compatible Standard: ISO 9523 Better traction on ice and snow More comfort when walking Replaceable original soles Scope of delivery: toe and heel plates FAQ What are the advantages of GripWalk soles? GripWalk soles improve walking comfort and provide significantly more grip on slippery or icy surfaces. For which Nordica ski boots are the soles suitable? They fit models of the Nordica HF series with 102 mm last width as well as The Cruise, Speedmachine J and Dobermann Jr. Is the Nordica HF Pro 130 compatible? No, this model is excluded from compatibility. What is included in the scope of delivery? The set includes toe and heel plates for replacing ski boot soles.

With the Nordica Machine GripWalk soles, you can quickly and reliably replace worn-out sole plates on your ski boots. The set consists of forefoot and heel plates in the GripWalk design and fits many Nordica models. If your soles are worn from walking on asphalt or stones, this replacement set ensures a secure hold in the binding and greater comfort when walking. Nordica Machine GripWalk soles – perfectly fitting replacement for Nordica ski boots The Nordica Machine GripWalk soles have been specially developed for Promachine, Speedmachine and Sportmachine ski boots. The GripWalk soles provide better traction when walking and at the same time a precise connection to the binding with compatible GripWalk bindings. Advantages of the Nordica replacement sole plates Replacement set with forefoot and heel plates GripWalk standard for better walking comfort More traction on slippery surfaces Compatible with GripWalk bindings Ensures secure binding function Suitable for many Nordica Machine models Color: Black / White Compatible ski boot models Nordica Promachine Nordica Speedmachine Nordica Sportmachine Compatible seasonal models 2016 / 2017 2017 / 2018 2018 / 2019 2019 / 2020 2020 / 2021 2021 / 2022 2022 / 2023 2023 / 2024 2024 / 2025 2025 / 2026 Product details Product: Nordica Machine GripWalk soles Type: Replacement sole plates Standard: GripWalk Set: forefoot and heel plates FAQ When should you replace ski boot soles? If the soles are heavily worn by walking on asphalt or stones, the binding function can be impaired. Replacing them ensures a secure grip again. Are GripWalk soles compatible with all bindings? No. GripWalk soles only work with bindings that are explicitly GripWalk compatible. Which Nordica models fit these soles? The soles fit many Nordica Promachine, Speedmachine and Sportmachine ski boots. What is the advantage of GripWalk soles? GripWalk soles offer more comfort when walking and better grip on slippery surfaces.