Fritschi Safety strap set

The Fritschi Xenic stopper bar makes it easy to replace the stopper bar if necessary without having to change the entire mechanism of the Xenic bindings. This practical stopper bracket is available in different widths to ensure an optimum fit for your skis. The mechanism remains reusable, offering a sustainable and cost-efficient solution. Compatible with Xenic bindings Easy replacement of the stopper bracket Mechanism can be reused Available widths: 85 mm, 95 mm, 105 mm With the Fritschi Xenic stopper bracket you can quickly and easily adapt your ski bindings to different ski widths without having to replace the mechanism.

The lightweight Dynafit Superlite Brake 105mm, retrofittable ski stopper is compatible with the Superlite 175 and 150 bindings.The Superlite ski stopper is very easy to retrofit.Important: After fitting the ski stopper, the release values of the binding must be checked by a specialist dealer using an appropriate measuring device and readjusted if necessary. The settings depend not only on the type of binding and boot, but also on additional components such as ski stoppers. Assembly and adjustment by an unauthorized person is at your own risk and will invalidate the warranty. Improper adjustment can increase the risk of injury.

With its introduction, the innovative Kingpin redefines the performance standard for alpine touring bindings. The toe piece and heel piece are the result of years of development work: very easy to use, thanks to the wide drill pattern and XXL Power Transmitter with unusually high power transmission and simply impressive walking comfort (incl. 0°, 7°, 13° climbing aid). The current Kingpin 13 with carbon lever unit now carries the lighter toe piece of the Alpinist with only two springs, which further reduces the weight. Release functionality and downhill performance are still at the highest level. KINGPIN FERSE The revolutionary heel construction for PinTech bindings with widely spaced sole contact points provides loss-free and very direct power transmission, which is normally only known from alpine bindings. The Kingpin also offers unprecedented advantages in terms of safety. CLIMBING AID (KINGPIN) All good climbing aids have one thing in common: they can be operated by feel in any situation, even when you don't have them in view. Ease of use is a basic requirement and reduced effort is not a shame. The Kingpin also impresses with its integrated climbing aid with a choice of 7° and 13°, which can be easily operated with the plate of the ski pole. And because the stirrup is located in the upper third of the heel, it can be reached with any plate shape or the tip of the pole. KINGPIN TOE PIECE The Pintech design of the KingPin toe piece enables ergonomic rolling of the foot and the most direct ski connection. Six steel springs ensure optimum energy absorption up to a Z-value of 13. Fixed stops guarantee comfortable entry in all conditions.

The Marker Duke PT 12 (DIN 4-12) also combines the performance of a jester with the climbing comfort of a pin binding. The latest generation of the even lighter Hollow Linkage heel at the rear and the completely newly developed Ride & Hike Toe at the front: the upper part of the toe piece is folded forward to expose the pin binding. To save moving weight on the ski, the front upper section can also be removed and stowed in the rucksack. The multifunctional Lock & Walk unit automatically locks the brake and offers a 10° climbing aid. Before setting off, the toe piece is simply put back on or folded down, whereby it automatically locks fourfold and activates the function of a classic toe piece. With a standing height of just 24 mm, direct power transmission and fast edge changes are a matter of course. Thanks to Sole.ID, all Duke PTs are compatible with alpine, touring and GripWalk soles. Product features Marker Duke PT 12 100mm: Category: Hardcore Freeride Ride & Hike Brake width: 100 mm, 125 mm Z-value: 4.0 - 12.0 Boot type: Adult, standard Alpine, GripWalk Adult, Touring Boots Recommended rider weight: up to 120 kg Stand height without ski: 24 mm Toe piece: Ride & Hike Automatic heel: Hollow Linkage 2 Heel adjustment range: 60 mm Walking modes: 0°, 10° Weight: Uphill 850 g / downhill: 1150 g AFD skid plate: Stainless steel

The Marker Duke PT 12 (DIN 4-12) also combines the performance of a jester with the climbing comfort of a pin binding. The latest generation of the even lighter Hollow Linkage heel at the rear and the completely newly developed Ride & Hike Toe at the front: the upper part of the toe piece is folded forward to expose the pin binding. To save moving weight on the ski, the front upper section can also be removed and stowed in the rucksack. The multifunctional Lock & Walk unit automatically locks the brake and offers a 10° climbing aid. Before setting off, the toe piece is simply put back on or folded down, whereby it automatically locks fourfold and activates the function of a classic toe piece. With a standing height of just 24 mm, direct power transmission and fast edge changes are a matter of course. Thanks to Sole.ID, all Duke PTs are compatible with alpine, touring and GripWalk soles. Product features Marker Duke PT 12 125mm: Category: Hardcore Freeride Ride & Hike Brake width: 100 mm, 125 mm Z-value: 4.0 - 12.0 Boot type: Adult, standard Alpine, GripWalk Adult, Touring Boots Recommended rider weight: up to 120 kg Stand height without ski: 24 mm Toe piece: Ride & Hike Automatic heel: Hollow Linkage 2 Heel adjustment range: 60 mm Walking modes: 0°, 10° Weight: Uphill 850 g / downhill: 1150 g AFD skid plate: Stainless steel

Robust speed touring binding with minimal weight and maximum reliability for alpine challenges. The binding comes with stopper and adjustment travel. Replacement suspension fork is available separately.The Superlite 175+ impresses with minimal weight and maximum reliability as a robust speed binding for demanding alpine tours.When the going gets tough on the mountain, nothing can go wrong: You can rely 100% on the strong Superlite 175+ at all times and still be light, fast and efficient on the mountain. On the ascent, you can choose between two walking modes (half-step and climbing aid) for additional comfort. On the descent, the Superlite 175+ impresses with very good power transmission to the ski. The release values are fully adjustable laterally from DIN 5-12. The vertical release is fixed, but can be adjusted using a separately available exchangeable spring fork. The Superlite 175+ is equipped with a ski stopper as standard and weighs a light 319 grams in this version.The Superlite 175+ is fitted with an adjustment plate that allows a heel adjustment range of 20 mm to adapt to different sole lengths. Crampons can be quickly and easily attached for use in icy or slippery conditions.Like all DYNAFIT bindings, the Superlite 175+ is developed and manufactured in Germany and comes with the DYNAFIT Lifetime Guarantee.

The lightweight Dynafit Superlite Brake 75mm, retrofittable ski stopper is compatible with the Superlite 175 and 150 bindings.The Superlite ski stopper is very easy to retrofit.Important: After fitting the ski stopper, the release values of the binding must be checked by a specialist dealer using an appropriate measuring device and readjusted if necessary. The settings depend not only on the type of binding and boot, but also on additional components such as ski stoppers. Assembly and adjustment by an unauthorized person is at your own risk and will invalidate the warranty. Improper adjustment can increase the risk of injury.

The lightweight Dynafit Superlite Brake 90mm, retrofittable ski stopper is compatible with the Superlite 175 and 150 bindings.The Superlite ski stopper is very easy to retrofit.Important: After fitting the ski stopper, the release values of the binding must be checked by a specialist dealer using an appropriate measuring device and readjusted if necessary. The settings depend not only on the type of binding and boot, but also on additional components such as ski stoppers. Assembly and adjustment by an unauthorized person is at your own risk and will invalidate the warranty. Improper adjustment can increase the risk of injury.

The ultra-light and resilient touring pin binding for high alpine challenges, equipped with a Z-value up to 12. The ultra-light pin binding (245 g without brake) offers active length compensation during ski flex and impressive power transmission on the descent thanks to the 38 mm wide drill pattern. The carbon-reinforced and therefore very stiff toe piece is equipped with anti-icing pads and integrated elastomers for easy entry. The heel offers an ascent aid with 0°, 5° and 9° angles and can be quickly and easily adjusted between ascent and descent mode. Particularly practical: once fitted, the Alpinist has a heel adjustment range of +/-7.5mm to adapt to different sole lengths! Product features Marker Alpinist 12: Category: Alpine Touring Brake width: optional (90 or 105mm) Z-value: 6.0 - 12.0 Boot type: Touring boots Recommended rider weight: max. 110 kg Stand height without ski: 18 mm Toe: Pin Technology Toe Automatic heel: ALPINSIT heel Heel adjustment range: 15 mm Walking modes: 0°, 5°, 9° Weight with brake: 245 g

Robust speed touring binding with minimal weight and maximum reliability for alpine challenges. The Dynafit Superlite 175 - Z12 Black/Yellow 105mm binding comes with stopper and adjustment travel. Replacement suspension fork is available separately.The Superlite 175+ impresses with minimal weight and maximum reliability as a robust speed binding for demanding alpine tours.When the going gets tough on the mountain, nothing can go wrong: You can rely 100% on the strong Superlite 175+ at all times and still be light, fast and efficient on the mountain. On the ascent, you can choose between two walking modes (half-step and climbing aid) for additional comfort. On the descent, the Superlite 175+ impresses with very good power transmission to the ski. The release values are fully adjustable laterally from DIN 5-12. The vertical release is fixed, but can be adjusted using a separately available exchangeable spring fork. The Superlite 175+ is equipped with a ski stopper as standard and weighs a light 319 grams in this version.The Superlite 175+ is fitted with an adjustment plate that allows a heel adjustment range of 20 mm to adapt to different sole lengths. Crampons can be quickly and easily attached for use in icy or slippery conditions.Like all DYNAFIT bindings, the Superlite 175+ is developed and manufactured in Germany and comes with the DYNAFIT Lifetime Guarantee.