Fritschi Ski touring bindings and crampons

The Fritschi safety strap set offers reliable protection for your skis. The safety strap serves as a safety pin and can only be used in combination with a ski stopper. It ensures that your skis do not get lost in the event of a fall or unintentional release from the binding and remain securely attached to your boot. Loss protection for skis Can only be used in combination with a ski stopper With the Fritschi safety strap set you have the additional security of knowing that your skis are always well secured on tours.

The Fritschi Tecton / Vipec Evo crampons are specially developed for the Tecton and Vipec Evo bindings and offer maximum grip on icy or hard snow conditions. These crampons are extremely easy to use and ensure that you always have additional stability and safety in difficult situations. They are available in different widths to fit your skis perfectly. Compatible with Tecton and Vipec Evo bindings Easy to use Maximum grip on icy surfaces Available widths: 90 mm, 100 mm, 115 mm With the Fritschi Tecton / Vipec Evo crampons you are ideally equipped for demanding tours and can ensure more grip and safety on icy passages.

The Fritschi Vipec / Tecton stopper bracket makes it possible to easily replace the stopper bar on Tecton and Vipec Evo bindings without having to change the entire mechanism. The stopper bracket is available in different widths to ensure a perfect fit for your skis. Compatible with Tecton and Vipec Evo bindings Easy replacement of the stopper bracket, reuse of the mechanism Available widths: 80 mm, 90 mm, 100 mm, 110 mm, 120 mm With the Fritschi stopper bracket you ensure that your bindings are always optimally adjusted to your skis without having to replace the entire mechanism.

The Fritschi Tecton 13 is the perfect binding for freeskiers looking for an active, dynamic skiing experience in challenging terrain. This downhill-oriented pin binding offers maximum power transmission and precise control with low weight, ideal for deep snow descents, steep faces, couloirs and fast turns. With a DIN range of 5 to 13 and a weight of just 550 g per unit without stoppers, the Tecton is ideal for both ascents and descents. Segment: Free Skiing & Touring DIN adjustment range: 5 to 13 Weight: 550 g / unit without stopper Ski width: 90 / 100 / 110 / 120 mm stopper Alpine heel clamps with rail for maximum power transmission Lateral release at the front with 13 mm dynamic travel Frontal release at the rear with 9 mm dynamic travel Dynamic length compensation of 10 mm for constant edge grip Interchangeable color clips: Ice Blue as standard, also available in Yellow Green and Black The Tecton 13 is not only functional, but also visually adaptable thanks to the interchangeable Color Clips. Its high elasticity and the safety technologies of the alpine bindings ensure maximum reliability in every skiing situation, both on the ascent and on the descent. With an optimum material mix of high-tech plastics and metal alloys, the binding is lightweight yet extremely stable. Especially for freeride pros, the Tecton offers uncompromising performance, safety and comfort - for the ultimate skiing experience in the backcountry and on challenging slopes.

Robust, lightweight crampon. Easy to use.85 / 95 / 105

The Fritschi Xenic stopper bar makes it easy to replace the stopper bar if necessary without having to change the entire mechanism of the Xenic bindings. This practical stopper bracket is available in different widths to ensure an optimum fit for your skis. The mechanism remains reusable, offering a sustainable and cost-efficient solution. Compatible with Xenic bindings Easy replacement of the stopper bracket Mechanism can be reused Available widths: 85 mm, 95 mm, 105 mm With the Fritschi Xenic stopper bracket you can quickly and easily adapt your ski bindings to different ski widths without having to replace the mechanism.

Optimum safety even for lightweights with ambitions. With a DIN adjustment range, the new Xenic offers optimum safety even for very light touring skiers*. Guaranteeing reliable release even at low setting values is not a matter of course with pin bindings, but it is extremely important for light and very light people. The Xenic is the solid, lightweight binding for alpinists who go all out on the uphill, but also accelerate on the downhill in any alpine terrain. Both for high-performance skiers and for those who get their fitness on the piste. With the DIN setting range from as low as 3, it also offers very light and young sports enthusiasts the necessary safety plus outstanding downhill characteristics. Segment: High TouringTarget group: ambitious alpinists who are looking for light weight and do not compromise on safety and performanceIdeal ski width: 70 to 105 mmDIN adjustment range: 3 to 10Weight: 280 g / unit without stopper

The Fritschi Xenic Yellow is a lightweight but robust touring binding that offers outstanding performance both uphill and downhill. It is ideal for ambitious alpinists who do not want to compromise on safety and comfort. With a DIN adjustment range of 3 to 10, it also offers very light ski tourers optimum safety. The patented system of the front unit holds the boot firmly and securely in the binding, even on dynamic descents, without the need for locking. The Xenic 10 is designed for high-performance skiers looking for precise and stable power transmission. The extra-wide heel support and dynamic length compensation of 10 mm ensure optimum edge grip and agility on any terrain. The construction made of high-quality high-tech materials ensures stability and durability with low weight. DIN adjustment range: 3 - 10 (Xenic 10) Extra wide heel support for high stability Dynamic length compensation of 10 mm for optimum edge grip Patented front unit prevents unintentional release No locking required to secure the hold Separate systems for sideways and frontal release Lightweight construction with high-tech materials 99 % of parts manufactured in Switzerland The Fritschi Xenic offers a reliable connection between boot and ski to ensure a dynamic and safe skiing experience. It is perfect for ski tourers who love both ascents and descents.

The Fritschi Vipec Evo 12 is a versatile pin binding for all those who value safety, performance and comfort. It is perfect for alpine tours with challenging descents as well as for enjoyable ski tours in snowy landscapes. Thanks to the innovative safety technologies, the binding offers extra protection - both on the ascent and on the descent. Features of the Fritschi Vipec Evo 12 Side release at the front with 13 mm elasticity on each side for maximum safety Fixed pin heel unit without rotation for efficient power transmission DIN values adjustable: front side release, rear front release Emergency release when climbing for additional safety in critical situations Weight: only 500 g per unit (without ski stopper) Ski stopper widths: 80 / 90 / 100 / 110 / 120 mm Awarded by Alpin magazine for performance and safety Technical data binding system Pin binding with fixed heel unit DIN 4 - 12 Weight 500 g per unit (without ski stopper, +50 g) Ski stopper 80 / 90 / 100 / 110 / 120 mm FAQ about the Fritschi Vipec Evo 12 Who is the Vipec Evo 12 suitable for? It is ideal for experienced touring skiers, but also for beginners who value safety and versatility. What are the benefits of the side release at the front? The binding releases sideways at the front, similar to an alpine binding. This protects you in the event of a fall and reduces the risk of injury. Can I also use the binding on alpine tours? Yes, the Vipec Evo 12 is designed for both leisurely ski tours and demanding alpine tours with steep descents. How heavy is the binding? One unit weighs only 500 g (without ski stopper). With stopper it adds approx. 50 g.

Flexible on the ascent, powerful on the descent: The Fritschi Xenic Plus 12 impresses with outstanding downhill performance and full safety technology with minimal weight. It is ideal for all those who want to remain flexible on the ascent and demand maximum performance on the descent. Features of the Fritschi Xenic Plus 12 Horizontal pin levers at the front - prevent unintentional release without risky locking Rotating, broadly supported heel unit - ensures high stability and direct power transmission DIN values can be adjusted separately - Precise adjustment of lateral and frontal release Lightweight with full safety package - unique in this category No additional locking required for the descent Weight: only 280 g per unit (without ski stopper) Ski stopper widths: 75 / 85 / 95 / 105 mm - also available without stopper Awarded by Alpin magazine for performance and safety Technical data binding system Pin binding with rotating heel unit DIN 3 - 12 Weight 280 g per unit (without ski stopper, +45 g) Ski stopper 75 / 85 / 95 / 105 mm FAQ about the Fritschi Xenic Plus 12 Who is the Xenic Plus 12 suitable for? It is aimed at ski tourers who are looking for minimum weight uphill and maximum stability downhill. What makes it different from other lightweight bindings? The Xenic Plus 12 is the only ultra-light binding that offers a complete safety package like an alpine binding. Do I need a lock for the descent? No, the binding is designed to prevent unintentional release - without any risky locking mechanism. How heavy is the binding? It weighs only 280 g per unit, with ski stopper approx. 325 g - making it one of the lightest in its class.