Dynafit Crampons 100mm

The Fritschi Tecton 13 is the perfect binding for freeskiers looking for an active, dynamic skiing experience in challenging terrain. This downhill-oriented pin binding offers maximum power transmission and precise control with low weight, ideal for deep snow descents, steep faces, couloirs and fast turns. With a DIN range of 5 to 13 and a weight of just 550 g per unit without stoppers, the Tecton is ideal for both ascents and descents. Segment: Free Skiing & Touring DIN adjustment range: 5 to 13 Weight: 550 g / unit without stopper Ski width: 90 / 100 / 110 / 120 mm stopper Alpine heel clamps with rail for maximum power transmission Lateral release at the front with 13 mm dynamic travel Frontal release at the rear with 9 mm dynamic travel Dynamic length compensation of 10 mm for constant edge grip Interchangeable color clips: Ice Blue as standard, also available in Yellow Green and Black The Tecton 13 is not only functional, but also visually adaptable thanks to the interchangeable Color Clips. Its high elasticity and the safety technologies of the alpine bindings ensure maximum reliability in every skiing situation, both on the ascent and on the descent. With an optimum material mix of high-tech plastics and metal alloys, the binding is lightweight yet extremely stable. Especially for freeride pros, the Tecton offers uncompromising performance, safety and comfort - for the ultimate skiing experience in the backcountry and on challenging slopes.

A real all-rounder: light, user-friendly, tried and tested over many years and even more robust thanks to the aluminum-reinforced rear jaw. The perfect companion for all tours from the local mountain to high-altitude ski tours.The Radical binding is a real all-rounder and combines robustness, comfort and user-friendliness. The STEP-IN SIDE TOWERS make it easier to get into the toe piece by over 30% and at the same time increase lateral stability during the descent. The new aluminum-reinforced rear jaw enables even better power transmission between heel and ski thanks to greater rigidity, making the bindings a robust partner for many years to come.The Radical has two climbing aids that can be added or removed quickly and easily with the pole. In terms of length adjustment, the binding offers 25 mm of leeway, which allows adjustments to be made to different sole lengths. The release values are fully adjustable laterally and vertically from DIN 4-10. Crampons can be attached to the Radical.Like all DYNAFIT bindings, the Radical is developed and manufactured in Germany. Technical data Radical Blue Weight: 520gDIN: 4-10Stopper Size: 92-100mm

The ATK Freeraider 15 EVO is the latest generation of high-performance freetouring bindings - developed for skiers who demand lightness on the ascent and uncompromising control on the descent. With a weight of only 395 g it combines state-of-the-art technology, maximum safety and unparalleled downhill precision. The Freeraider 15 EVO is available in several colors, including Indigo, Orange, Black Sand, Pink, Titanium and Yellow. Advantages of the ATK Freeraider 15 EVO Maximum downhill performance - Developed for freeriders with the highest demands Lightweight & stable - only 395 g with best power transmission ELASTIC RESPONSE SYSTEM - guarantees even pressure distribution under load DIN values 7-15 - Adjustable front and rear for maximum safety climbing aids with 3 positions - Flat, +24 mm, +49 mm Skibrakes included - available in widths 86, 91, 97, 102, 108 and 120 mm Heel adjustment range - 25 mm for precise adjustment to different sole lengths Robust materials - 7075 aluminum, stainless steel and POM for durability and stability Technical data Weight 395 g per unit Materials Aluminum 7075, stainless steel, POM DIN value front 7 - 15 (AL14 included) DIN value rear 7 - 15 (AL13 included) Length compensation 14 mm (E.R.S.) Heel adjustment 25 mm Climbing aids Flat / +24 mm / +49 mm Ski stopper widths 86 / 91 / 97 / 102 / 108 / 120 mm Sustainability & maintenance ATK stands for durable design. All components of the Freeraider 15 EVO - from the climbing aid mechanism to the ski stopper - are interchangeable and available as spare parts. This guarantees a long service life and reduces waste. FAQ about the ATK Freeraider 15 EVO Who is the Freeraider 15 EVO suitable for? The binding is ideal for ambitious freeriders and ski tourers who are looking for maximum performance and stability. How much does the binding weigh? One unit weighs just 395 grams - perfect for free touring with top downhill performance. Which ski topper sizes are available? The binding is available in 86, 91, 97, 102, 108 and 120 mm - suitable for almost all freeride skis. What is the Elastic Response System? The E.R.S. ensures even pressure distribution with compression and relief of the ski - for more control and safety on the descent. Can the Freeraider 15 EVO be serviced? Yes, all components are replaceable and available as original spare parts. ATK offers comprehensive maintenance and repair options.

The ATK Freeraider 15 EVO is the latest generation of high-performance freetouring bindings - developed for skiers who demand lightness on the ascent and uncompromising control on the descent. With a weight of only 395 g it combines state-of-the-art technology, maximum safety and unparalleled downhill precision. The Freeraider 15 EVO is available in several colors, including Indigo, Orange, Black Sand, Pink, Titanium and Yellow. Advantages of the ATK Freeraider 15 EVO Maximum downhill performance - Developed for freeriders with the highest demands Lightweight & stable - only 395 g with best power transmission ELASTIC RESPONSE SYSTEM - guarantees even pressure distribution under load DIN values 7-15 - Adjustable front and rear for maximum safety climbing aids with 3 positions - Flat, +24 mm, +49 mm Skibrakes included - available in widths 86, 91, 97, 102, 108 and 120 mm Heel adjustment range - 25 mm for precise adjustment to different sole lengths Robust materials - 7075 aluminum, stainless steel and POM for durability and stability Technical data Weight 395 g per unit Materials Aluminum 7075, stainless steel, POM DIN value front 7 - 15 (AL14 included) DIN value rear 7 - 15 (AL13 included) Length compensation 14 mm (E.R.S.) Heel adjustment 25 mm Climbing aids Flat / +24 mm / +49 mm Ski stopper widths 86 / 91 / 97 / 102 / 108 / 120 mm Sustainability & maintenance ATK stands for durable design. All components of the Freeraider 15 EVO - from the climbing aid mechanism to the ski stopper - are interchangeable and available as spare parts. This guarantees a long service life and reduces waste. FAQ about the ATK Freeraider 15 EVO Who is the Freeraider 15 EVO suitable for? The binding is ideal for ambitious freeriders and ski tourers who are looking for maximum performance and stability. How much does the binding weigh? One unit weighs just 395 grams - perfect for free touring with top downhill performance. Which ski topper sizes are available? The binding is available in 86, 91, 97, 102, 108 and 120 mm - suitable for almost all freeride skis. What is the Elastic Response System? The E.R.S. ensures even pressure distribution with compression and relief of the ski - for more control and safety on the descent. Can the Freeraider 15 EVO be serviced? Yes, all components are replaceable and available as original spare parts. ATK offers comprehensive maintenance and repair options.

The Fritschi Vipec / Tecton stopper bracket makes it possible to easily replace the stopper bar on Tecton and Vipec Evo bindings without having to change the entire mechanism. The stopper bracket is available in different widths to ensure a perfect fit for your skis. Compatible with Tecton and Vipec Evo bindings Easy replacement of the stopper bracket, reuse of the mechanism Available widths: 80 mm, 90 mm, 100 mm, 110 mm, 120 mm With the Fritschi stopper bracket you ensure that your bindings are always optimally adjusted to your skis without having to replace the entire mechanism.

Flexible on the ascent, powerful on the descent: The Fritschi Xenic Plus 12 impresses with outstanding downhill performance and full safety technology with minimal weight. It is ideal for all those who want to remain flexible on the ascent and demand maximum performance on the descent. Features of the Fritschi Xenic Plus 12 Horizontal pin levers at the front - prevent unintentional release without risky locking Rotating, broadly supported heel unit - ensures high stability and direct power transmission DIN values can be adjusted separately - Precise adjustment of lateral and frontal release Lightweight with full safety package - unique in this category No additional locking required for the descent Weight: only 280 g per unit (without ski stopper) Ski stopper widths: 75 / 85 / 95 / 105 mm - also available without stopper Awarded by Alpin magazine for performance and safety Technical data binding system Pin binding with rotating heel unit DIN 3 - 12 Weight 280 g per unit (without ski stopper, +45 g) Ski stopper 75 / 85 / 95 / 105 mm FAQ about the Fritschi Xenic Plus 12 Who is the Xenic Plus 12 suitable for? It is aimed at ski tourers who are looking for minimum weight uphill and maximum stability downhill. What makes it different from other lightweight bindings? The Xenic Plus 12 is the only ultra-light binding that offers a complete safety package like an alpine binding. Do I need a lock for the descent? No, the binding is designed to prevent unintentional release - without any risky locking mechanism. How heavy is the binding? It weighs only 280 g per unit, with ski stopper approx. 325 g - making it one of the lightest in its class.

The Fritschi Vipec Evo 12 is a versatile pin binding for all those who value safety, performance and comfort. It is perfect for alpine tours with challenging descents as well as for enjoyable ski tours in snowy landscapes. Thanks to the innovative safety technologies, the binding offers extra protection - both on the ascent and on the descent. Features of the Fritschi Vipec Evo 12 Side release at the front with 13 mm elasticity on each side for maximum safety Fixed pin heel unit without rotation for efficient power transmission DIN values adjustable: front side release, rear front release Emergency release when climbing for additional safety in critical situations Weight: only 500 g per unit (without ski stopper) Ski stopper widths: 80 / 90 / 100 / 110 / 120 mm Awarded by Alpin magazine for performance and safety Technical data binding system Pin binding with fixed heel unit DIN 4 - 12 Weight 500 g per unit (without ski stopper, +50 g) Ski stopper 80 / 90 / 100 / 110 / 120 mm FAQ about the Fritschi Vipec Evo 12 Who is the Vipec Evo 12 suitable for? It is ideal for experienced touring skiers, but also for beginners who value safety and versatility. What are the benefits of the side release at the front? The binding releases sideways at the front, similar to an alpine binding. This protects you in the event of a fall and reduces the risk of injury. Can I also use the binding on alpine tours? Yes, the Vipec Evo 12 is designed for both leisurely ski tours and demanding alpine tours with steep descents. How heavy is the binding? One unit weighs only 500 g (without ski stopper). With stopper it adds approx. 50 g.

The Fritschi Xenic Yellow is a lightweight but robust touring binding that offers outstanding performance both uphill and downhill. It is ideal for ambitious alpinists who do not want to compromise on safety and comfort. With a DIN adjustment range of 3 to 10, it also offers very light ski tourers optimum safety. The patented system of the front unit holds the boot firmly and securely in the binding, even on dynamic descents, without the need for locking. The Xenic 10 is designed for high-performance skiers looking for precise and stable power transmission. The extra-wide heel support and dynamic length compensation of 10 mm ensure optimum edge grip and agility on any terrain. The construction made of high-quality high-tech materials ensures stability and durability with low weight. DIN adjustment range: 3 - 10 (Xenic 10) Extra wide heel support for high stability Dynamic length compensation of 10 mm for optimum edge grip Patented front unit prevents unintentional release No locking required to secure the hold Separate systems for sideways and frontal release Lightweight construction with high-tech materials 99 % of parts manufactured in Switzerland The Fritschi Xenic offers a reliable connection between boot and ski to ensure a dynamic and safe skiing experience. It is perfect for ski tourers who love both ascents and descents.

The Fritschi Tecton 13 is the perfect binding for freeskiers looking for an active, dynamic skiing experience in challenging terrain. This downhill-oriented pin binding offers maximum power transmission and precise control with low weight, ideal for deep snow descents, steep faces, couloirs and fast turns. With a DIN range of 5 to 13 and a weight of just 550 g per unit without stoppers, the Tecton is ideal for both ascents and descents. Segment: Free Skiing & Touring DIN adjustment range: 5 to 13 Weight: 550 g / unit without stopper Ski width: 90 / 100 / 110 / 120 mm stopper Alpine heel clamps with rail for maximum power transmission Lateral release at the front with 13 mm dynamic travel Frontal release at the rear with 9 mm dynamic travel Dynamic length compensation of 10 mm for constant edge grip Interchangeable color clips: Ice Blue as standard, also available in Yellow Green and Black The Tecton 13 is not only functional, but also visually adaptable thanks to the interchangeable Color Clips. Its high elasticity and the safety technologies of the alpine bindings ensure maximum reliability in every skiing situation, both on the ascent and on the descent. With an optimum material mix of high-tech plastics and metal alloys, the binding is lightweight yet extremely stable. Especially for freeride pros, the Tecton offers uncompromising performance, safety and comfort - for the ultimate skiing experience in the backcountry and on challenging slopes.

The Fritschi Vipec / Tecton stopper bracket makes it possible to easily replace the stopper bar on Tecton and Vipec Evo bindings without having to change the entire mechanism. The stopper bracket is available in different widths to ensure a perfect fit for your skis. Compatible with Tecton and Vipec Evo bindings Easy replacement of the stopper bracket, reuse of the mechanism Available widths: 80 mm, 90 mm, 100 mm, 110 mm, 120 mm With the Fritschi stopper bracket you ensure that your bindings are always optimally adjusted to your skis without having to replace the entire mechanism.