Blacklight Skin 95 172cm
CHF 169.00*
% CHF 219.00* (22.83% saved)
No longer available
Closed from 25.-29. and from 31.-4.1.
During this time no parcel shipping.
Product information "Blacklight Skin 95 172cm"
The DYNAFIT Blacklight 88 ski touring skin not only prevents annoying stud formation, but also ensures excellent climbing and gliding properties. A special intermediate membrane prevents water absorption and eliminates the need to seal the edges of the skins. The skins are more resistant to tearing and wear and are easier to fold. The DYNAFIT tensioning system provides the ideal connection between the skin and the ski tip. Snow and ice cannot penetrate, as the skin fits snugly right up to the tip. This is how ski mountaineers, ski racers and ski tourers achieve their common desired result: maximum performance, more comfort and maximum safety. Lange: 172cm.
| Color: | Black |
|---|---|
| Exact color name: | Black |
| LANGE: | 172cm |
| Manufacturer: | Dynafit |
| Product type: | Touring skin |
| Target group: | Gentlemen, Ladies |
Login
Ergänze Dein Setup
The practical mounting set consisting of 2 elastic cords, 2 folding cord stoppers, 2 washers.
These colltex adhesive pads help quickly when the ski skins come off or the adhesive surface is dirty in some places. Set of 10 sheets (60 x 75mm)
The "hotmelt tape" is the best way to completely recoat the ski skin with a hotmelt adhesive layer. If possible, first remove old glue residue and dirt from the adhesive layer of the ski skin. Unroll the tape at room temperature with the foil side down to the length of the ski and fix the ends. Stick the ski skin with the adhesive layer onto the hotmelt tape and press it down lightly. Now cut the tape to the correct size along the edge of the ski skin. Now turn the ski skin and heat the tape with an iron at approx. 120 degrees slowly and with light pressure. This transfers the adhesive. Allow it to cool well before removing the film and attaching the cover net to the adhesive layer.
Fastening system for ski skins. Can be easily clamped to the end of any ski. Camlock by Colltex is a fastening system for Colltex ski skins. It is made of unbreakable plastic and stainless steel and can be used with any ski end.
2 skin stirrups EVO with tip caps for all ski models.
Jones Nomad PRO Skins are the ultimate high performance splitboard skins for all snow conditions. The Nomad Pro skin fibers are a blend of 70% mohair and 30% synthetic nylon fibers. This combination of natural and synthetic fibers provides the perfect balance of glide, grip and durability. Nomad Pro skins are PFC-free and have been coated with both the Bluesign-approved EVER DRY 3.0 anti-glapping treatment to improve wet snow performance and the GLIDE TECH treatment, which helps maintain glide for the life of the skin. Jones Nomad skins are also laminated with a RUBBER SAFER SKIN backing. This rubber layer prevents the skin from absorbing water and makes it easier to pull the skins apart. Ready for immediate use: Pre-cut skins do not need to be trimmed. The Quick Tension Tail Clip is attached to the skin. The Quick Tension Tail Clip adjusts in seconds, ensures perfect skin tension and is compatible with all Jones splitboards from 2016. Clip A - Jones Womens Solution 146, 149, 152, 155 - Jones Dreamcatcher 145, 148, 151, 154 - Jones Hovercraft 146 Clip B - Ultra Solution 158, 161 - Solution 154, 158, 161 Clip D - Jones Mountain Twin Split 157, 159, 160 Clip F - Jones Ultra Solution 162W - Jones Solution 162W, 167 Clip G - Jones Ultra Solution 165W Clip O - Jones Escape 156L, 159L, 162W
Easily adjustable end hooks made of unbreakable plastic with easy handling for all ski models.
Self-assembly set with 2 Hexagon end hooks, 2 perforated straps, 6 top and bottom rivets.
The perfect assembly set consisting of 2 camlock end hooks, 2 perforated straps, 6 rivet heads and 6 rivet bases. Center the camlock strap on the adhesive layer and press firmly. Pierce through the pre-punched holes with riveting pliers or an awl. Push the lower parts of the rivets through the holes, place the rivet heads on and tap the rivets together with a hammer. Cut the ski skin at the back up to the contact zone on both sides. 2 End hooks 2 perforated straps 6 rivets + carpet pad
The lightweight and practical touring wallet for your rucksack - made from ski skin remnants. Ideal for credit cards, notes and coins. The color of the product may differ from the picture, as these wallets are sewn from ski skin remnants.
Accessory Items
The Blacklight 95 is a wide and powerful touring ski with a low weight of 1,160 g, which scores with top performance on the descent. Your entry into the backcountry: The Blacklight 95 is the widest ski in the Blacklight Speed series. It was developed for touring skiers for whom no distance is too far in search of the perfect powder. If you want a ski with strong downhill performance, but at the same time want to be as light and efficient as possible on the ascent to the perfect line, then the Blacklight 95 is the model of your choice. With 95 mm underfoot, a larger radius and a longer tip rocker, the ski is made for you to be fast, make big turns in the snow and enjoy powder conditions to the full. The Blacklight 95 has a 100 % UD carbon topsheet. UD is the abbreviation for unidirectional and describes the arrangement of the carbon fibers. Compared to classic carbon, this construction has a higher tensile strength and higher load-bearing capacity with a lower density. The Blacklight 95 is equipped with a wood core made from 100% high-quality paulownia. Thanks to the 3D construction, the flywheel mass is reduced in front of and behind the binding area, thus reducing the overall weight of the ski. This gives you extremely stable skiing characteristics despite the low weight. The rocker construction at the tip and tail and the sidecut are adapted to the respective ski length - this is unique in the ski touring market. This means that the effective edge length remains proportionally the same for all lengths and works independently of the ski length. To ensure the best possible power transmission to the ski, the Blacklight is equipped with a full ABS sidewall. The base also has a special racing grind for even more speed. This allows you to make up valuable time in the "race" for the first turns. Blacklight 95 - your lightweight and high-performance powder specialist.