Holmenkol Textile Wash

The HOLMENKOL Natural Tent Cleaner is a gentle, thoroughly effective special cleaner for equipment made of synthetic fabrics and canvas. It removes stubborn dirt, dust, green deposits, pollen, bird droppings, as well as grease and oil residues and visibly refreshes the colors. At the same time, it neutralizes unpleasant odors. Ideal for tents, camping tarpaulins, awnings, sun sails and backpacks. Biodegradable. Product properties Gentle, thorough cleaning for synthetic fabrics & canvas Suitable for waterproof fabrics of outdoor equipment Removes dirt, dust, green deposits, pollen, bird droppings, grease & oil residues Color refreshing and odor neutralizing Biodegradable Ideal for tents, camping tarpaulins, awnings, sun sails, backpacks Application Remove coarse dirt and moisten the surface. Spray cleaner evenly or apply with sponge/cloth. Allow to work briefly, then go over with soft brush or sponge. Rinse thoroughly with water and allow to air dry. Test material compatibility in an inconspicuous area beforehand; do not use in direct sunlight. Product details BrandHOLMENKOL Product typeSpecial cleaner for outdoor fabrics Contents1000 ml Suitable forSynthetic fabrics & canvas, waterproof fabrics Areas of applicationTents, camping tarpaulins, awnings, sun sails, backpacks PropertiesBiodegradable, color refreshing, odor neutralizing FAQ Which materials is the cleaner suitable for? For synthetic outdoor fabrics and canvas, including waterproof fabrics of tents, tarpaulins, awnings, sun sails, and backpacks. Does the cleaner attack coatings? It is designed to be gentle on materials. Still, always test on an inconspicuous area and rinse thoroughly after use. Can I impregnate after cleaning? Yes. After complete drying, a suitable impregnation is recommended to optimize water and dirt protection. Does the cleaner remove green deposits and bird droppings? Yes, the Natural Tent Cleaner is specially designed to remove green deposits, pollen, bird droppings, as well as grease and oil residues. Is the product environmentally friendly? Yes, the formulation is biodegradable. 

Perfectly suited for the gentle removal of wax, grease, oil and resin from bases, clothing and hands. Optimal dosage. Product advantages Holmenkol Wax remover spray 250ml: Deep cleaning Fast drying

Fluorine-free high-performance finishing liquid wax from Holmenkol for cold and aggressive snow types for maximum speed and acceleration from the start. Meets all regulations of the international ski associations. For fine to coarse and aggressive snow For snow temperatures from -12° to -20°C Increases speed and acceleration Quick and easy application before the competition

World Cup-proven ultra-fine steel brush for final exposure of the structure. Very good handling due to large hand contact surface and holding strap. Removes the last wax residues deep inside the structure. Provides more speed. Ideally suited for finishing products (e.g. HOLMENKOL Syntec Race Powder).

Highly fluorinated synthetic racing wax. Product advantages Holmenkol Syntec Worldcup HF 2.0 Cold: The successful wax from the World Cup For fine to coarse and wet snow For snow temperatures from -12 ° to -20 °C Maximum water and dirt repellency Very high acceleration Top marks for gliding properties and abrasion resistance Ironing temperature 110 ~120 °C

Very absorbent and absorbent special fleece. Product advantages Holmenkol Care Fleece Large: Ideal for base cleaning and polishing work With practical tear-off perforation 102m x 20cm

Practical set of 2 with one bar each of Alphamix YELLOW and Betamix RED. Ironing temperature 115~145 °C. Product advantages Holmenkol Worldcup Mix Hot Yellow-Red: Highest quality base and training wax based on hydrocarbon For all types of snow For snow temperatures from 0° to -14°C 2x35 gr

Impresses with its extreme abrasion resistance. Ironing temperature 115~125 °C. Product advantages Holmenkol Alphamix Yellow: Highest quality base, base and training wax based on hydrocarbon 150 gr For soft, new and fine-grained snow For snow temperatures from 0° to -4°C

Simple and precise temperature setting via rotary knob. Constant heat regulation due to extra-thick base plate. Temperature control from 50 -160 °C. Unique special structure in the base plate guarantees optimum wax distribution. Supplied incl. heat-resistant base plate.

Electronic professional device for resharpening Plexiglas blades. Suitable for scraper blades with a thickness of 3-5 mm. The high speed of the wheel enables precise sharpening results.