Holmenkol Syntec FF1 Liquid YLW

The Holmenkol Infinity Liquid YLW is a fluorine-free speed liquid wax of the latest generation, specially developed for competitions. It complies with all regulations of the international ski associations and ensures speed and acceleration through quick and easy application directly before the competition. Snow type: For new, fine to coarse and wet snow Snow temperature: 0 °C to -4 °C Application: Apply to the ski base with a sponge, allow to dry, finish with a fleece (hand- or roto-brushed) and brush out lightly with a soft nylon brush Technology: New generation fluorine-free top coating liquid Product status: World Cup Special Edition 23-24, not for the mass market Content: 50 ml

The FINE TUNING SPRAY | Warm from FZERO is the ideal booster for maximum gliding speed in wet conditions as the final layer applied, it ensures optimal fine tuning in racing. Field of application: For wet snow conditions with temperatures from 0°C to -12°C Suitable for Alpine skiing, freestyle skiing, snowboarding & Nordic skiing 100% fluorine-free – environmentally friendly and high-performing Application: Clean the base with Base Cleaner before use. Spray Fine Tuning Spray very finely and evenly onto the ski base. Distribute evenly with fleece or pad. Let dry for at least 30 minutes. Then lightly polish with a nylon or horsehair brush. Optimization tips: Before use, select the appropriate paste wax or hot wax (hot wax) for the conditions. For extreme snow conditions, the base wax can be optimized with hot wax additives. The Fine Tuning Spray is used especially as the last layer under wet conditions. Product details: Base: Future glide additives in spray form Content: 50ml Optimize your gliding speed with the FINE TUNING SPRAY | Warm from FZERO – for that decisive extra speed in the race!

Fluorine-free high-performance finishing liquid wax from Holmenkol for cold and aggressive snow types for maximum speed and acceleration from the start. Meets all regulations of the international ski associations. For fine to coarse and aggressive snow For snow temperatures from -12° to -20°C Increases speed and acceleration Quick and easy application before the competition

GIGAGLIDE Race is the uncompromising high-speed coating for anyone who knows no limits on the slopes. Developed for maximum performance at high and very high speeds, this coating unfolds its full potential exactly where conventional wax reaches its limits. More speed, more stability, more flow. From a speed of approx. 20–25 km/h, the race performance begins to have a noticeable effect – and the faster you go, the stronger the effect. Ideal for sporty skiers, racers and anyone who loves speed. GIGAGLIDE Race – Advantages at a glance Maximum high-speed performance: Developed for high and very high speeds Dirt-repellent: Skis stay clean longer than with conventional wax Fast application: No hot waxing, no ironing, no scraping Complete wax replacement: Same or better performance than conventional ski wax Environmentally friendly: Free from harmful chemicals Extremely durable: Suitable for all alpine skis and snowboards Gentle on the base: No heat, no damage to the ski structure Yield 50 ml are sufficient for at least 20 pairs of alpine skis Riding characteristics GIGAGLIDE Race works directly in the ski base and is activated by friction. Depending on snow and temperature conditions, the coating needs a few hundred meters before the full gliding effect is achieved. Activation can be accelerated by rubbing with a cotton cloth. The race effect comes into play especially at high speeds: The faster you go, the greater the performance gain. Application & Durability 12 hours exposure time: Durability 5–10 days on the slopes (depending on snow and temperature conditions) 5 minutes exposure time: Durability at least 1 day on the slopes Note: Not suitable for touring skis and splitboards. FAQ about GIGAGLIDE Race Who is GIGAGLIDE Race suitable for? For sporty skiers, racers and anyone who wants maximum performance at high speeds. When does the race effect take effect? The performance advantage is clearly noticeable from approx. 20–25 km/h and increases with speed. Does GIGAGLIDE Race replace conventional ski wax? Yes, it completely replaces wax for alpine use. Does the base need to be processed after application? No, scraping or brushing is not necessary. Optionally, polishing with a cotton cloth is possible.

GIGAGLIDE Prime 50 ml is the ideal coating for every ski day. Easy to apply, reliable in effect and perfect as an introduction to the world of ski coatings. Apply, allow to work in briefly and noticeably glide better – without any hot waxing. The innovative formula from GIGAGLIDE works directly in the ski base. With every run, the ski becomes smoother, the gliding effect builds up continuously and is maintained over several days of skiing. Ideal for anyone looking for uncomplicated performance. GIGAGLIDE Prime – Advantages at a glance Dirt-repellent: Stays cleaner than conventional wax Extremely easy to use: No ironing, no scraping Wax replacement: Reliable performance on the slopes Environmentally friendly: Free from harmful chemicals Universally applicable: For all alpine skis and snowboards Gentle on the base: No thermal stress on the ski structure Yield 50 ml are sufficient for at least 20 pairs of alpine skis Riding characteristics GIGAGLIDE Prime works in the ski base and is activated by friction. Depending on the snow and temperature conditions, the product needs a few hundred meters of skiing before the full gliding effect sets in. This process can be accelerated by rubbing it in with a cotton cloth. Application & Durability 12 hours application time: Durability 3–6 days on the slopes (depending on snow and temperature) 5 minutes application time: Durability at least 1 day on the slopes Please note: Not suitable for touring skis and splitboards. FAQ about GIGAGLIDE Prime Does GIGAGLIDE Prime replace classic ski wax? Yes, GIGAGLIDE Prime is a fully-fledged replacement for conventional wax in alpine use. Do I have to remove or polish anything after application? No, no scraping is necessary. Optionally, you can polish with a cotton cloth. Which skis is GIGAGLIDE Prime suitable for? For all alpine skis and snowboards. Not recommended for touring skis and splitboards.

Maximum cross-country skiing fun - minimum effort for classic and skating skis. GIGAGLIDE CROSS COUNTRY is specially developed for classic and skating skis. Better gliding properties with GigaGlide Cross Country. Amateur and performance-oriented cross-country skiers can save a lot of time (and money) with Gigaglide Cross Country. Product features Gigaglide Cross Country: For all types of snow and temperatures Faster gliding than conventional wax No ironing, no brushing - clean working Replaces wax completely Biodegradable Dirt-repellent

Gigaglide Pro is the top coating for every ski day and the original product of the Gigaglide series. Maximum gliding properties combined with extremely easy application make this coating a real all-rounder for ambitious skiers. Apply, allow to work briefly and glide noticeably better and longer. The proven Gigaglide formula works directly in the ski base. After the first descents, the ski becomes measurably faster, as the gliding effect is continuously activated and increased by friction. Ideal for all those who want performance without hot waxing. Gigaglide Pro – Advantages at a glance Dirt-repellent: Keeps skis and snowboards clean longer than classic wax Quick & easy: No ironing, no scraping, no workshop effort Complete wax replacement: Equivalent or better performance on the slopes Environmentally friendly: Free from harmful chemicals Extremely durable: Suitable for all alpine skis and snowboards Gentle on the base: No thermal load, ski structure remains intact Yield 50 ml are enough for at least 20 pairs of alpine skis Riding characteristics Gigaglide Pro works in the ski base and is activated by friction. Depending on snow and temperature conditions, the product needs a few hundred meters of skiing before the full gliding effect sets in. Activation can be accelerated by rubbing in with a cotton cloth. Application & Durability 12 hours application time: Durability 5–10 days on the slopes (depending on snow and temperature) 5 minutes application time: Durability at least 1 day on the slopes Note: Not suitable for touring skis and splitboards. FAQ about Gigaglide Pro Does Gigaglide Pro completely replace classic ski wax? Yes, Gigaglide Pro completely replaces conventional wax for alpine use. Do I have to peel or brush after application? No, peeling is not necessary. Optionally, it can be polished with a cotton cloth. For which skis is Gigaglide Pro suitable? For all alpine skis and snowboards. Touring skis and splitboards are excluded.

Fluorine-free synthesis speed liquid wax. Meets all regulations of the international ski associations. Product advantages Holmenkol Syntec Speed Liquid FF2 Yellow: New fluorine-free high-performance formula Meets all regulations of the international ski associations For fine to coarse and wet snow For snow temperatures from -0° to -6°C Very high acceleration

The new liquid wax variant of the top seller Alphamix is now also available in liquid form. Very easy to apply with a fleece or sponge and allow to soak in briefly. Brush out with a nylon or horsehair brush and you're done. The Holmenkol Alphamix yellow liquid is a fluorine-free training wax for waxing alpine skis, cross-country skis and snowboards. Product advantages Holmenkol Alphamix YELLOW Liquid: Alphamix YELLOW Liquid New liquid wax variant of the top seller Alphamix. For all types of snow For snow temperatures from 0° to -4°C Quick and easy application

The TOKO World Cup Polishing Cloth is a polishing cloth based on natural wood fibers that is perfect for wiping off dust and polishing ski bases after waxing. The cloth is extremely absorbent and ensures a flawless, polished surface. With a width of 19 cm and a length of 20 meters, the roll offers a large amount of polishing cloth, which can be easily torn off thanks to the practical pre-perforation. Polishing cloth made from natural wood fibers Perfect for wiping off dust and polishing ski surfaces after waxing Very absorbent for a clean and polished surface 19 cm wide, 20 m on the roll Pre-perforated for easy tearing