Fritschi Vipec Evo 12 100mm

The Marker Duke PT 12 (DIN 4-12) also combines the performance of a jester with the climbing comfort of a pin binding. The latest generation of the even lighter Hollow Linkage heel at the rear and the completely newly developed Ride & Hike Toe at the front: the upper part of the toe piece is folded forward to expose the pin binding. To save moving weight on the ski, the front upper section can also be removed and stowed in the rucksack. The multifunctional Lock & Walk unit automatically locks the brake and offers a 10° climbing aid. Before setting off, the toe piece is simply put back on or folded down, whereby it automatically locks fourfold and activates the function of a classic toe piece. With a standing height of just 24 mm, direct power transmission and fast edge changes are a matter of course. Thanks to Sole.ID, all Duke PTs are compatible with alpine, touring and GripWalk soles. Product features Marker Duke PT 12 100mm: Category: Hardcore Freeride Ride & Hike Brake width: 100 mm, 125 mm Z-value: 4.0 - 12.0 Boot type: Adult, standard Alpine, GripWalk Adult, Touring Boots Recommended rider weight: up to 120 kg Stand height without ski: 24 mm Toe piece: Ride & Hike Automatic heel: Hollow Linkage 2 Heel adjustment range: 60 mm Walking modes: 0°, 10° Weight: Uphill 850 g / downhill: 1150 g AFD skid plate: Stainless steel

With its introduction, the innovative Kingpin redefines the performance standard for alpine touring bindings. The toe piece and heel piece are the result of years of development work: very easy to use, thanks to the wide drill pattern and XXL Power Transmitter with unusually high power transmission and simply impressive walking comfort (incl. 0°, 7°, 13° climbing aid). The current Kingpin 13 with carbon lever unit now carries the lighter toe piece of the Alpinist with only two springs, which further reduces the weight. Release functionality and downhill performance are still at the highest level. KINGPIN FERSE The revolutionary heel construction for PinTech bindings with widely spaced sole contact points provides loss-free and very direct power transmission, which is normally only known from alpine bindings. The Kingpin also offers unprecedented advantages in terms of safety. CLIMBING AID (KINGPIN) All good climbing aids have one thing in common: they can be operated by feel in any situation, even when you don't have them in view. Ease of use is a basic requirement and reduced effort is not a shame. The Kingpin also impresses with its integrated climbing aid with a choice of 7° and 13°, which can be easily operated with the plate of the ski pole. And because the stirrup is located in the upper third of the heel, it can be reached with any plate shape or the tip of the pole. KINGPIN TOE PIECE The Pintech design of the KingPin toe piece enables ergonomic rolling of the foot and the most direct ski connection. Six steel springs ensure optimum energy absorption up to a Z-value of 13. Fixed stops guarantee comfortable entry in all conditions.

The Marker Duke PT 12 (DIN 4-12) also combines the performance of a jester with the climbing comfort of a pin binding. The latest generation of the even lighter Hollow Linkage heel at the rear and the completely newly developed Ride & Hike Toe at the front: the upper part of the toe piece is folded forward to expose the pin binding. To save moving weight on the ski, the front upper section can also be removed and stowed in the rucksack. The multifunctional Lock & Walk unit automatically locks the brake and offers a 10° climbing aid. Before setting off, the toe piece is simply put back on or folded down, whereby it automatically locks fourfold and activates the function of a classic toe piece. With a standing height of just 24 mm, direct power transmission and fast edge changes are a matter of course. Thanks to Sole.ID, all Duke PTs are compatible with alpine, touring and GripWalk soles. Product features Marker Duke PT 12 125mm: Category: Hardcore Freeride Ride & Hike Brake width: 100 mm, 125 mm Z-value: 4.0 - 12.0 Boot type: Adult, standard Alpine, GripWalk Adult, Touring Boots Recommended rider weight: up to 120 kg Stand height without ski: 24 mm Toe piece: Ride & Hike Automatic heel: Hollow Linkage 2 Heel adjustment range: 60 mm Walking modes: 0°, 10° Weight: Uphill 850 g / downhill: 1150 g AFD skid plate: Stainless steel

With its introduction, the innovative Kingpin redefines the performance standard for alpine touring bindings. The toe piece and heel piece are the result of years of development work: very easy to use, thanks to the wide drill pattern and XXL Power Transmitter with unusually high power transmission and simply impressive walking comfort (incl. 0°, 7°, 13° climbing aid). The current Kingpin 13 with carbon lever unit now carries the lighter toe piece of the Alpinist with only two springs, which further reduces the weight. Release functionality and downhill performance are still at the highest level. KINGPIN FERSE The revolutionary heel construction for PinTech bindings with widely spaced sole contact points provides loss-free and very direct power transmission, which is normally only known from alpine bindings. The Kingpin also offers unprecedented advantages in terms of safety. CLIMBING AID (KINGPIN) All good climbing aids have one thing in common: they can be operated by feel in any situation, even when you don't have them in view. Ease of use is a basic requirement and reduced effort is not a shame. The Kingpin also impresses with its integrated ascent aid with a choice of 7° and 13°, which can be easily operated with the plate of the ski pole. And because the stirrup is located in the upper third of the heel, it can be reached with any plate shape or the tip of the pole. KINGPIN TOE PIECE The Pintech design of the KingPin toe piece enables ergonomic rolling of the foot and the most direct ski connection. Six steel springs ensure optimum energy absorption up to a Z-value of 13. Fixed stops guarantee comfortable entry in all conditions.

The ultra-light and resilient touring pin binding for high alpine challenges, equipped with a Z-value up to 12. The ultra-light pin binding (245 g without brake) offers active length compensation during ski flex and impressive power transmission on the descent thanks to the 38 mm wide drill pattern. The carbon-reinforced and therefore very stiff toe piece is equipped with anti-icing pads and integrated elastomers for easy entry. The heel offers an ascent aid with 0°, 5° and 9° angles and can be quickly and easily adjusted between ascent and descent mode. Particularly practical: once fitted, the Alpinist has a heel adjustment range of +/-7.5mm to adapt to different sole lengths! Product features Marker Alpinist 12: Category: Alpine Touring Brake width: optional (90 or 105mm) Z-value: 6.0 - 12.0 Boot type: Touring boots Recommended rider weight: max. 110 kg Stand height without ski: 18 mm Toe: Pin Technology Toe Automatic heel: ALPINSIT heel Heel adjustment range: 15 mm Walking modes: 0°, 5°, 9° Weight with brake: 245 g

The revolutionary combination of avalanche and back protection: The LINE R.A.S. PROTECTOR 22 combines the advantages of an avalanche airbag backpack with a removable back protector for the first time. Technical data Evoc Line R.A.S. Protector 22L System integrated: Optimum load distribution and 100% fit comfort through and Fully opening, easily accessible main compartment above the back Hydration bladder compartment up to 3l

The Blacklight 95 is a wide and powerful touring ski with a low weight of 1,160 g, which scores with top performance on the descent. Your entry into the backcountry: The Blacklight 95 is the widest ski in the Blacklight Speed series. It was developed for touring skiers for whom no distance is too far in search of the perfect powder. If you want a ski with strong downhill performance, but at the same time want to be as light and efficient as possible on the ascent to the perfect line, then the Blacklight 95 is the model of your choice. With 95 mm underfoot, a larger radius and a longer tip rocker, the ski is made for you to be fast, make big turns in the snow and enjoy powder conditions to the full. The Blacklight 95 has a 100 % UD carbon topsheet. UD is the abbreviation for unidirectional and describes the arrangement of the carbon fibers. Compared to classic carbon, this construction has a higher tensile strength and higher load-bearing capacity with a lower density. The Blacklight 95 is equipped with a wood core made from 100% high-quality paulownia. Thanks to the 3D construction, the flywheel mass is reduced in front of and behind the binding area, thus reducing the overall weight of the ski. This gives you extremely stable skiing characteristics despite the low weight. The rocker construction at the tip and tail and the sidecut are adapted to the respective ski length - this is unique in the ski touring market. This means that the effective edge length remains proportionally the same for all lengths and works independently of the ski length. To ensure the best possible power transmission to the ski, the Blacklight is equipped with a full ABS sidewall. The base also has a special racing grind for even more speed. This allows you to make up valuable time in the "race" for the first turns. Blacklight 95 - your lightweight and high-performance powder specialist.

The Black Crows Solis is a masterpiece for steep slope enthusiasts. Specially developed to meet the challenges of steep slopes, the Solis combines innovative technology with precise performance. Technical details Buoyancy: 100mm on the runner Front Rocker: Progressive and simple, prevents oversteer Radius: Long radius (25m) for excellent grip on hard snow Heel: Progressive heel with slight rocker at the back stabilizes the ski Camber: Classic, lightweight camber for balance between safety and maneuverability Flex: Lange and homogeneous flex Attachment point: -9cm Construction: Semi-Cap with ABS edges Core: Paulownia / poplar wood Additional material: Titanal plate under the binding; glass/carbon fiber Special feature: Minimalist attachment for the skins at the front Width: 100 mm Weight: 1800g The Solis is ideal for skiers who love challenging terrain and value safety and precision. With its reinforced edge and Titanal plate, the Solis offers excellent grip and secure heel hold. Available at Ski-Shop.ch.

The Transalp 86 CTI takes you over all mountains. Carbon fibers and the Air Tec wood core with Shaped TI Technology make the ski not only very light, but also torsionally stiff and stable. Thanks to its medium width, this ski is ideal for touring enthusiasts who want to enjoy long ascents effortlessly without sacrificing downhill performance. Skin with 70% mohair and 30% nylon content - solvent-free and made in Austria! No water absorption and the best mix of skin adhesion and easy handling thanks to KOHLA Fibre Seal Technology. Smart Adhesion Glue guarantees perfectly coordinated adhesive behavior across all temperature ranges. Fischer Fast Fix System ensures simple and smart attachment to the ski. Versatile touring ski with very good downhill performance Increased stability thanks to Shaped TI Technology Lightweight in its product category

The Fritschi Tecton / Vipec Evo crampons are specially developed for the Tecton and Vipec Evo bindings and offer maximum grip on icy or hard snow conditions. These crampons are extremely easy to use and ensure that you always have additional stability and safety in difficult situations. They are available in different widths to fit your skis perfectly. Compatible with Tecton and Vipec Evo bindings Easy to use Maximum grip on icy surfaces Available widths: 90 mm, 100 mm, 115 mm With the Fritschi Tecton / Vipec Evo crampons you are ideally equipped for demanding tours and can ensure more grip and safety on icy passages.