Fritschi Crampons Xenic

The lightweight Dynafit Superlite Brake 105mm, retrofittable ski stopper is compatible with the Superlite 175 and 150 bindings.The Superlite ski stopper is very easy to retrofit.Important: After fitting the ski stopper, the release values of the binding must be checked by a specialist dealer using an appropriate measuring device and readjusted if necessary. The settings depend not only on the type of binding and boot, but also on additional components such as ski stoppers. Assembly and adjustment by an unauthorized person is at your own risk and will invalidate the warranty. Improper adjustment can increase the risk of injury.

Robust speed touring binding with minimal weight and maximum reliability for alpine challenges. The Dynafit Superlite 175 - Z12 Black/Yellow 105mm binding comes with stopper and adjustment travel. Replacement suspension fork is available separately.The Superlite 175+ impresses with minimal weight and maximum reliability as a robust speed binding for demanding alpine tours.When the going gets tough on the mountain, nothing can go wrong: You can rely 100% on the strong Superlite 175+ at all times and still be light, fast and efficient on the mountain. On the ascent, you can choose between two walking modes (half-step and climbing aid) for additional comfort. On the descent, the Superlite 175+ impresses with very good power transmission to the ski. The release values are fully adjustable laterally from DIN 5-12. The vertical release is fixed, but can be adjusted using a separately available exchangeable spring fork. The Superlite 175+ is equipped with a ski stopper as standard and weighs a light 319 grams in this version.The Superlite 175+ is fitted with an adjustment plate that allows a heel adjustment range of 20 mm to adapt to different sole lengths. Crampons can be quickly and easily attached for use in icy or slippery conditions.Like all DYNAFIT bindings, the Superlite 175+ is developed and manufactured in Germany and comes with the DYNAFIT Lifetime Guarantee.

The Fritschi Xenic stopper bar makes it easy to replace the stopper bar if necessary without having to change the entire mechanism of the Xenic bindings. This practical stopper bracket is available in different widths to ensure an optimum fit for your skis. The mechanism remains reusable, offering a sustainable and cost-efficient solution. Compatible with Xenic bindings Easy replacement of the stopper bracket Mechanism can be reused Available widths: 85 mm, 95 mm, 105 mm With the Fritschi Xenic stopper bracket you can quickly and easily adapt your ski bindings to different ski widths without having to replace the mechanism.

The Fritschi safety strap set offers reliable protection for your skis. The safety strap serves as a safety pin and can only be used in combination with a ski stopper. It ensures that your skis do not get lost in the event of a fall or unintentional release from the binding and remain securely attached to your boot. Loss protection for skis Can only be used in combination with a ski stopper With the Fritschi safety strap set you have the additional security of knowing that your skis are always well secured on tours.

The Fritschi Tecton / Vipec Evo crampons are specially developed for the Tecton and Vipec Evo bindings and offer maximum grip on icy or hard snow conditions. These crampons are extremely easy to use and ensure that you always have additional stability and safety in difficult situations. They are available in different widths to fit your skis perfectly. Compatible with Tecton and Vipec Evo bindings Easy to use Maximum grip on icy surfaces Available widths: 90 mm, 100 mm, 115 mm With the Fritschi Tecton / Vipec Evo crampons you are ideally equipped for demanding tours and can ensure more grip and safety on icy passages.

The Fritschi Tecton / Vipec Evo crampons are specially developed for the Tecton and Vipec Evo bindings and offer maximum grip on icy or hard snow conditions. These crampons are extremely easy to use and ensure that you always have additional stability and safety in difficult situations. They are available in different widths to fit your skis perfectly. Compatible with Tecton and Vipec Evo bindings Easy to use Maximum grip on icy surfaces Available widths: 90 mm, 100 mm, 115 mm With the Fritschi Tecton / Vipec Evo crampons you are ideally equipped for demanding tours and can ensure more grip and safety on icy passages.

The Fritschi Tecton / Vipec Evo crampons are specially developed for the Tecton and Vipec Evo bindings and offer maximum grip on icy or hard snow conditions. These crampons are extremely easy to use and ensure that you always have additional stability and safety in difficult situations. They are available in different widths to fit your skis perfectly. Compatible with Tecton and Vipec Evo bindings Easy to use Maximum grip on icy surfaces Available widths: 90 mm, 100 mm, 115 mm With the Fritschi Tecton / Vipec Evo crampons you are ideally equipped for demanding tours and can ensure more grip and safety on icy passages.

The Fritschi Vipec / Tecton stopper bracket makes it possible to easily replace the stopper bar on Tecton and Vipec Evo bindings without having to change the entire mechanism. The stopper bracket is available in different widths to ensure a perfect fit for your skis. Compatible with Tecton and Vipec Evo bindings Easy replacement of the stopper bracket, reuse of the mechanism Available widths: 80 mm, 90 mm, 100 mm, 110 mm, 120 mm With the Fritschi stopper bracket you ensure that your bindings are always optimally adjusted to your skis without having to replace the entire mechanism.

Flexible on the ascent, powerful on the descent: The Fritschi Xenic Plus 12 impresses with outstanding downhill performance and full safety technology with minimal weight. It is ideal for all those who want to remain flexible on the ascent and demand maximum performance on the descent. Features of the Fritschi Xenic Plus 12 Horizontal pin levers at the front - prevent unintentional release without risky locking Rotating, broadly supported heel unit - ensures high stability and direct power transmission DIN values can be adjusted separately - Precise adjustment of lateral and frontal release Lightweight with full safety package - unique in this category No additional locking required for the descent Weight: only 280 g per unit (without ski stopper) Ski stopper widths: 75 / 85 / 95 / 105 mm - also available without stopper Awarded by Alpin magazine for performance and safety Technical data binding system Pin binding with rotating heel unit DIN 3 - 12 Weight 280 g per unit (without ski stopper, +45 g) Ski stopper 75 / 85 / 95 / 105 mm FAQ about the Fritschi Xenic Plus 12 Who is the Xenic Plus 12 suitable for? It is aimed at ski tourers who are looking for minimum weight uphill and maximum stability downhill. What makes it different from other lightweight bindings? The Xenic Plus 12 is the only ultra-light binding that offers a complete safety package like an alpine binding. Do I need a lock for the descent? No, the binding is designed to prevent unintentional release - without any risky locking mechanism. How heavy is the binding? It weighs only 280 g per unit, with ski stopper approx. 325 g - making it one of the lightest in its class.

The Fritschi Xenic Yellow is a lightweight but robust touring binding that offers outstanding performance both uphill and downhill. It is ideal for ambitious alpinists who do not want to compromise on safety and comfort. With a DIN adjustment range of 3 to 10, it also offers very light ski tourers optimum safety. The patented system of the front unit holds the boot firmly and securely in the binding, even on dynamic descents, without the need for locking. The Xenic 10 is designed for high-performance skiers looking for precise and stable power transmission. The extra-wide heel support and dynamic length compensation of 10 mm ensure optimum edge grip and agility on any terrain. The construction made of high-quality high-tech materials ensures stability and durability with low weight. DIN adjustment range: 3 - 10 (Xenic 10) Extra wide heel support for high stability Dynamic length compensation of 10 mm for optimum edge grip Patented front unit prevents unintentional release No locking required to secure the hold Separate systems for sideways and frontal release Lightweight construction with high-tech materials 99 % of parts manufactured in Switzerland The Fritschi Xenic offers a reliable connection between boot and ski to ensure a dynamic and safe skiing experience. It is perfect for ski tourers who love both ascents and descents.