TÖDI Crystal ski skins

Experienced splitboarders and demanding ski tourers swear by the "Alpinist" in top quality, which has proven itself a thousand times over. PALÜ - the name says it all - is perfect for long ski tours, high alpine tours and multi-day touring adventures. With an absolutely reliable adhesive layer for all snow conditions. The ski skin for experts with maximum gliding properties thanks to the 100% mohair quality. Cut to size splitboard width: 160mm, splitboard length up to 170cm 00% mohair, blue, hotmelt blue, Nose attachment: 100mm Tail attachment: Tail Fluke

Service ALL INCLUSIVE for Colltex ski skins: Shipping costs Recoating Impregnation Colltex Portemonaie Simply put the skin in the safebag and send it to Colltex free of charge for recoating.

The "hotmelt tape" is the best way to completely recoat the ski skin with a hotmelt adhesive layer. If possible, first remove old glue residue and dirt from the adhesive layer of the ski skin. Unroll the tape at room temperature with the foil side down to the length of the ski and fix the ends. Stick the ski skin with the adhesive layer onto the hotmelt tape and press it down lightly. Now cut the tape to the correct size along the edge of the ski skin. Now turn the ski skin and heat the tape with an iron at approx. 120 degrees slowly and with light pressure. This transfers the adhesive. Allow it to cool well before removing the film and attaching the cover net to the adhesive layer.

Colltex Skinproof is a long-lasting impregnation for ski skins. It reliably protects your skins from moisture, reduces the build-up of snow and supports clean gliding properties in changing conditions. Especially on longer tours, this care helps you to maintain the function and service life of your ski skins. Impregnate ski skins for better performance When ski skins absorb moisture, they can become heavier and snow can stick more easily. With Colltex Skinproof, you can treat your skins specifically so that they remain more water-repellent and perform better on tour. This is particularly practical in wet snow, changing temperatures and demanding conditions. Your advantages with Colltex Skinproof Long-lasting impregnation for ski skins Protects against moisture and humidity Helps to prevent the build-up of snow Supports better gliding properties Can extend the life of the skins Ideal for touring, splitboard, and ski mountaineering Application of Colltex Skinproof Apply the impregnation evenly to clean and dry ski skins. Allow the product to work in well and follow the manufacturer's instructions. Regular care will help you to maintain the function of your skins in the long term. Who is Skinproof suitable for? Colltex Skinproof is suitable for anyone who wants to reliably care for their ski skins. Whether on short ski tours, long ascents or in difficult snow conditions: Good impregnation ensures more function and less trouble on the go. What does impregnation do for ski skins? Impregnation protects ski skins from moisture, reduces the build-up of snow and supports better gliding properties on tour. How often should you impregnate ski skins? It depends on the use and the conditions. If your skins get wet frequently or snow clings strongly, it's worth treating them again. Which skins is Colltex Skinproof suitable for? The product is suitable for ski skins and is ideal for touring ski and splitboard skins that require regular care. Why does snow cling to ski skins? When skins absorb moisture or conditions are changeable, snow can stick more easily. Suitable impregnation helps to reduce this.

The perfect tail attachment for every splitboard. Center the tape on the adhesive layer and press firmly. Pierce through the pre-punched holes with riveting pliers or an awl. Push the lower parts of the rivets through the holes, put on the rivet heads and tap the rivets together with a hammer. Cut the ski skin at the back up to the contact zone on both sides. 2 end hooks Split 2 Perforated straps 12 rivets + carpet pad

2 STANDARD skin tips with tip caps for all ski models. The 80mm bracket fits all common models and can be easily attached to your skin with the rivets. Skin hanger 80mm Mounting rivets

The lightweight and practical touring wallet for your rucksack - made from ski skin remnants. Ideal for credit cards, notes and coins. The color of the product may differ from the picture, as these wallets are sewn from ski skin remnants.

The perfect assembly set consisting of 2 camlock end hooks, 2 perforated straps, 6 rivet heads and 6 rivet bases. Center the camlock strap on the adhesive layer and press firmly. Pierce through the pre-punched holes with riveting pliers or an awl. Push the lower parts of the rivets through the holes, place the rivet heads on and tap the rivets together with a hammer. Cut the ski skin at the back up to the contact zone on both sides. 2 End hooks 2 perforated straps 6 rivets + carpet pad

The all-rounder for every splitboard tour - from simple pre-alpine tours to demanding high-altitude tours. The composition of 65% mohair and 35% polyamide makes TÖDI a robust universal skin. Its maximum abrasion resistance guarantees a long service life, combined with its perfect climbing properties - hardly any more "slipping back". Its versatility together with the proven adhesive layer make the TÖDI our best-selling splitboard skin. Cut to size splitboard width: 160mm, splitboard length up to 170cm TÖDI Mix, blue, Hotmelt blue, Nose attachment: 100mm Tail attachment: Tail Fluke

The "hotmelt tape" is the best way to completely recoat the ski skin with a hotmelt adhesive layer. If possible, first remove old glue residue and dirt from the adhesive layer of the ski skin. Unroll the tape at room temperature with the foil side down to the length of the ski and fix the ends. Stick the ski skin with the adhesive layer onto the hotmelt tape and press it down lightly. Now cut the tape to the correct size along the edge of the ski skin. Now turn the ski skin and heat the tape with an iron at approx. 120 degrees slowly and with light pressure. This transfers the adhesive. Allow it to cool well before removing the film and attaching the cover net to the adhesive layer.

Who hasn't experienced it when the ski skins start to come loose and the ascent has not yet been completed or the day is still young? The Colltex Quickspray adhesive for on the go. Only suitable for partial application, not for the complete renewal of the adhesive surface. Not suitable for COMBIN and CLARIDEN.

For ski skins with hotmelt adhesive layer Complete renewal of the adhesive layer Partial renewal of the adhesive layer Tube with 75 ml content

These colltex adhesive pads help quickly when the ski skins come off or the adhesive surface is dirty in some places. Set of 10 sheets (60 x 75mm)

Colltex ski skin sack made of microfiber Pro-Skin Ski skin sack from Colltex The Pro-Skin ski skin stocking replaces the cover film to protect the adhesive surface. Handling is uncomplicated and quick and easy, especially in windy conditions. If you want to stow the ski skins in your rucksack, put your hand in the skin stocking and pull it over your arm, then stow the ski skin in the stocking and wrap the rest around and you're done. Scope of delivery 2x microfiber ski skin stocking Stocking length 65cm

The "hotmelt tape" is the best way to completely recoat the ski skin with a hotmelt adhesive layer. If possible, first remove old glue residue and dirt from the adhesive layer of the ski skin. Unroll the tape at room temperature with the foil side down to the length of the ski and fix the ends. Stick the ski skin with the adhesive layer onto the hotmelt tape and press it down lightly. Now cut the tape to the correct size along the edge of the ski skin. Now turn the ski skin and heat the tape with an iron at approx. 120 degrees slowly and with light pressure. This transfers the adhesive. Allow it to cool well before removing the film and attaching the cover net to the adhesive layer.

Foam roller for applying the adhesive from the hotmelt adhesive tube 75ml. Tip: always roll in one direction.

Colltex Skinproof is a long-lasting impregnation for ski skins. It reliably protects your skins from moisture, reduces the build-up of snow and supports clean gliding properties in changing conditions. Especially on longer tours, this care helps you to maintain the function and service life of your ski skins. Impregnate ski skins for better performance When ski skins absorb moisture, they can become heavier and snow can stick more easily. With Colltex Skinproof, you can treat your skins specifically so that they remain more water-repellent and perform better on tour. This is particularly practical in wet snow, changing temperatures and demanding conditions. Your advantages with Colltex Skinproof Long-lasting impregnation for ski skins Protects against moisture and humidity Helps to prevent the build-up of snow Supports better gliding properties Can extend the life of the skins Ideal for touring, splitboard, and ski mountaineering Application of Colltex Skinproof Apply the impregnation evenly to clean and dry ski skins. Allow the product to work in well and follow the manufacturer's instructions. Regular care will help you to maintain the function of your skins in the long term. Who is Skinproof suitable for? Colltex Skinproof is suitable for anyone who wants to reliably care for their ski skins. Whether on short ski tours, long ascents or in difficult snow conditions: Good impregnation ensures more function and less trouble on the go. What does impregnation do for ski skins? Impregnation protects ski skins from moisture, reduces the build-up of snow and supports better gliding properties on tour. How often should you impregnate ski skins? It depends on the use and the conditions. If your skins get wet frequently or snow clings strongly, it's worth treating them again. Which skins is Colltex Skinproof suitable for? The product is suitable for ski skins and is ideal for touring ski and splitboard skins that require regular care. Why does snow cling to ski skins? When skins absorb moisture or conditions are changeable, snow can stick more easily. Suitable impregnation helps to reduce this.