Who hasn't experienced it when the ski skins start to come loose and the ascent has not yet been completed or the day is still young? The Colltex Quickspray adhesive for on the go. Only suitable for partial application, not for the complete renewal of the adhesive surface. Not suitable for COMBIN and CLARIDEN.
Colltex ski skin sack made of microfiber Pro-Skin Ski skin sack from Colltex The Pro-Skin ski skin stocking replaces the cover film to protect the adhesive surface. Handling is uncomplicated and quick and easy, especially in windy conditions. If you want to stow the ski skins in your rucksack, put your hand in the skin stocking and pull it over your arm, then stow the ski skin in the stocking and wrap the rest around and you're done. Scope of delivery 2x microfiber ski skin stocking Stocking length 65cm
For ski skins with hotmelt adhesive layer Complete renewal of the adhesive layer Partial renewal of the adhesive layer Tube with 75 ml content
The "hotmelt tape" is the best way to completely recoat the ski skin with a hotmelt adhesive layer. If possible, first remove old glue residue and dirt from the adhesive layer of the ski skin. Unroll the tape at room temperature with the foil side down to the length of the ski and fix the ends. Stick the ski skin with the adhesive layer onto the hotmelt tape and press it down lightly. Now cut the tape to the correct size along the edge of the ski skin. Now turn the ski skin and heat the tape with an iron at approx. 120 degrees slowly and with light pressure. This transfers the adhesive. Allow it to cool well before removing the film and attaching the cover net to the adhesive layer.
These colltex adhesive pads help quickly when the ski skins come off or the adhesive surface is dirty in some places. Set of 10 sheets (60 x 75mm)
The perfect assembly set consisting of 2 camlock end hooks, 2 perforated straps, 6 rivet heads and 6 rivet bases. Center the camlock strap on the adhesive layer and press firmly. Pierce through the pre-punched holes with riveting pliers or an awl. Push the lower parts of the rivets through the holes, place the rivet heads on and tap the rivets together with a hammer. Cut the ski skin at the back up to the contact zone on both sides. 2 End hooks 2 perforated straps 6 rivets + carpet pad
Fastening system for ski skins. Can be easily clamped to the end of any ski. Camlock by Colltex is a fastening system for Colltex ski skins. It is made of unbreakable plastic and stainless steel and can be used with any ski end.
The "hotmelt tape" is the best way to completely recoat the ski skin with a hotmelt adhesive layer. If possible, first remove old glue residue and dirt from the adhesive layer of the ski skin. Unroll the tape at room temperature with the foil side down to the length of the ski and fix the ends. Stick the ski skin with the adhesive layer onto the hotmelt tape and press it down lightly. Now cut the tape to the correct size along the edge of the ski skin. Now turn the ski skin and heat the tape with an iron at approx. 120 degrees slowly and with light pressure. This transfers the adhesive. Allow it to cool well before removing the film and attaching the cover net to the adhesive layer.
Self-assembly set with 2 Hexagon end hooks, 2 perforated straps, 6 top and bottom rivets.
2 STANDARD skin tips with tip caps for all ski models. The 80mm bracket fits all common models and can be easily attached to your skin with the rivets. Skin hanger 80mm Mounting rivets
Colltex repair adhesive for repairing damaged or poorly adhering areas on COMBIN skins. Simply apply with an application brush and leave to dry for 6-8 hours.
The practical mounting set consisting of 2 elastic cords, 2 folding cord stoppers, 2 washers.
The reusable cover net prevents soiling and drying out of the hotmelt adhesive layer on colltex skins.140mm/2x0.95m
Easily adjustable end hooks made of unbreakable plastic with easy handling for all ski models.
The perfect tail attachment for every splitboard. Center the tape on the adhesive layer and press firmly. Pierce through the pre-punched holes with riveting pliers or an awl. Push the lower parts of the rivets through the holes, put on the rivet heads and tap the rivets together with a hammer. Cut the ski skin at the back up to the contact zone on both sides. 2 end hooks Split 2 Perforated straps 12 rivets + carpet pad
The Colltex Express Universal Wax 40 g is a high-quality kerosene wax for ski skins and ski bases. It ensures optimum gliding and reliably prevents the formation of studs. Thanks to its handy size, it is ideal for on the go - whether on a ski tour or on Lange descents in the ski area. Properties of the Colltex Express Universal Wax Contents: 40 g Kerosene wax for ski skins and ski base Ensures better gliding Works effectively against stud formation Compact size - ideal for transportation Quick application on the go without additional tools FAQ about Colltex Express Universal Wax How is the Colltex Express Wax applied? The wax is rubbed directly onto the ski skins or base and can be used immediately. Can I also use the wax for ski bases? Yes, the Universal Wax is equally suitable for ski skins and ski bases. How much wax is included? One pack contains 40 g - enough for several applications on the go. Does the wax help prevent the formation of studs? Yes, it reliably prevents the formation of studs and thus ensures an even glide.
The reusable cover net prevents the hotmelt adhesive layer of Colltex skins from soiling and drying out.
2 skin stirrups with tip caps including top and bottom rivets for self-assembly. Suitable for all ski models.
2 skin stirrups EVO with tip caps for all ski models.
The all-rounder for every splitboard tour - from simple pre-alpine tours to demanding high-altitude tours. The composition of 65% mohair and 35% polyamide makes TÖDI a robust universal skin. Its maximum abrasion resistance guarantees a long service life, combined with its perfect climbing properties - hardly any more "slipping back". Its versatility together with the proven adhesive layer make the TÖDI our best-selling splitboard skin. Cut to size splitboard width: 160mm, splitboard length up to 170cm TÖDI Mix, blue, Hotmelt blue, Nose attachment: 100mm Tail attachment: Tail Fluke
The perfect end attachment for every splitboard. To mount yourself.
Service ALL INCLUSIVE for Colltex ski skins: Shipping costs Recoating Impregnation Colltex Portemonaie Simply put the skin in the safebag and send it to Colltex free of charge for recoating.
Foam roller for applying the adhesive from the hotmelt adhesive tube 75ml. Tip: always roll in one direction.
TÖDI Crystal - All-rounder ski skins - The robust all-rounder for all ski tours The TÖDI Crystal ski skins are the best-selling all-round ski skins from Colltex and offer an ideal balance between gliding properties, climbing ability and robustness. They are suitable for all types of snow and weather conditions and score points with their compact pack size. To protect the hotmelt adhesive layer, a cover net is supplied to protect the skins when not in use. Versatile and reliable for every tour The TÖDI ski skins are suitable for ski tour beginners who value good grip as well as for experienced mountain guides who want to be able to rely on their equipment in all conditions. These skins are the perfect choice for ski tourers looking for a versatile and durable ski skin. Customized for your ski model We supply TÖDI ski skins customized for your ski model. Make sure you choose the right ski brand, model and length. These customized skins are available from CHF 230.00 and guarantee you a reliable and comfortable touring experience.
Experienced splitboarders and demanding ski tourers swear by the "Alpinist" in top quality, which has proven itself a thousand times over. PALÜ - the name says it all - is perfect for long ski tours, high alpine tours and multi-day touring adventures. With an absolutely reliable adhesive layer for all snow conditions. The ski skin for experts with maximum gliding properties thanks to the 100% mohair quality. Cut to size splitboard width: 160mm, splitboard length up to 170cm 00% mohair, blue, hotmelt blue, Nose attachment: 100mm Tail attachment: Tail Fluke
Customized Colltex Lucendro Crystal - Newcomer The LUCENDRO ski skins with the Techfibre construction are the latest generation of ski skins. This new type of fiber was developed by Colltex over many years as part of an interdisciplinary team. The fiber stands for very good climbing properties and yet good gliding, and the raw material is produced in a Swiss spinning mill. As a world first, this ski skin can be individually printed in small quantities, and we recommend the LUCENDRO model for ski tourers who are looking for a ski skin with a particularly good grip and a pleasant glide at the same time. The product is ideal for beginners and all-round ski tourers. We deliver the ski skins perfectly tailored to your ski model. They are made to measure. When choosing, pay close attention to the model, length and waist. Thank you. Material: 100% Techfiber Skin Color: Print Adhesion: Hotmelt Weight: 99.9 gram (Skin 60mm x 150cm) Grip: Excellent grip with all snow conditions Glide: Good gliding characteristics Handling: Use of protective netting Touring Type: Beginner to allrounder
Colltex Race Crystal - Speedmaster The RACE are probably the fastest ski skins on the market. The construction of the 100% mohair fiber was designed even more for perfect gliding. The compromise is a little less grip. When not in use, we use a cover net to protect the hotmelt adhesive layer. We recommend the RACE ski skins to racers for training and competition. These ski skins are also a good choice for ambitious piste skiers. We supply the ski skins perfectly tailored to your ski model. They are made to measure. When choosing, pay close attention to the model, length and waist. Thank you.RACE Box: 1 Race Skin1 Training Skin 1 Express Universal Wax 1 HeadbandMaterial: 100% Mohair Skin Color: Yellow Adhesion: Drybase Hotmelt Weight: 98 gram (Skin 60mm x 150cm) CHARACTERISTIC Grip: Good grip with all snow conditions Glide: Excellent gliding characteristics Handling: Use of protective netting Touring Type: Athletes and Competitors
PALÜ Crystal - Alpinist ski skins - Maximum gliding properties for demanding ski tourers The PALÜ Crystal ski skins are specially designed for experts and sporty ski tourers who value maximum gliding properties. Made from 100 % natural fibers, they offer outstanding performance on fresh, dry and cold snow. For a longer service life and to protect the hotmelt adhesive layer, a cover net is included to protect the skins when not in use. Perfect for long and high alpine ski tours The PALÜ ski skins are ideal for long ski tours and multi-day touring adventures. Thanks to their exceptional gliding properties, they are the perfect choice for ski tourers who value maximum comfort and efficiency even on demanding alpine tours. Customization for your ski model We supply PALÜ ski skins perfectly tailored to your ski model. When selecting, please note the exact ski brand, model and length. The customized skins are available from CHF 240.00 and offer you a tailor-made touring experience.
Ski skins from Colltex in the canton of Glarus, in the heart of Switzerland, nestled in the Glarus Alps with the towering Tödi mountain, Colltex Ag has been at home for almost 70 years. The spirit of the Glarus tinkerers and inventors is as alive here as ever and continues to provide Colltex-typical product innovations in "Swiss made" quality. The ski skins are manufactured with care in the company's own production facility. The main task of a colltex ski skin is to get you to your destination safely and comfortably. In doing so, we rely on our experience and constant exchange with mountain guides, competitors, freeriders, passionate ski tourers and specialist sports retailers.