The PS series is a great glide wax for training and competition with good gliding properties.The speed of the iron should be approx. 8-10 seconds on a skater ski. The wax can be reheated after cooling to room temperature (10 minutes) for better durability. Scrape after approx. one minute. It is important to have a good iron to achieve efficient melting of the wax. PS8 RED -4°C to +4°C (25°F to 39°F). PS8 is an economical training and racing wax as well as a basic preparation wax for warm skis. Easy to melt and very easy to work with. Recommended iron temperature: 130 ° C (266 ° F). Replaces the CH8X.

PS7 is a wax that works well in normal winter conditions below freezing. The hardness makes it easier to work with and it is easier to achieve a good end result. PS7 is a very good ski touring and training wax as well as a good all-round basic preparation wax. The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. For better durability, the wax can be reheated after cooling to room temperature (10 minutes). It is important to have a good waxing iron to melt the wax efficiently. Recommended waxing iron temperature 140°C. A versatile wax for alpine and cross-country skis A good wax for base preparation Replaces CH7X. For ski touring, training, racing and base preparation skis

The HS series is a great glide wax for training and competition with very good gliding properties. The speed of the wax iron should be approx. 8-10 seconds on a skater ski. The wax can be reheated after cooling to room temperature (10 min) for better durability. Strip off after hardening. It is important to have a good iron to achieve efficient melting of the wax. TIP: Allow waxed skis to harden for several hours. HS8 is a popular glide wax for both base preparation and training. High Speed (HS) was specially developed for younger racers and ambitious recreational skiers. All waxes in this series have high performance and good durability. This makes them an affordable option for both competition and training. HS8 is easy to melt and very convenient to work with. It is equally suitable for training and racing. HS6 Red -2°C to -8°C Iron temperature 150°

Baseprep Normal For normal winter conditions, 0°C to -10°C. The universal base prep wax for most skis/snowboards. For use on new skis and as a travel wax.

FILES FOR RACING - CHROMED Traditional ski files, chrome-plated and very sharp for the workshop or ski tuning at home. These files have been the reference for standard ski files for years. They represent lasting value for years. 20 cm. SWIX Viala file. Traditional ski file. Excellent file for all For creating precise angles on side edges and bases. 16 TPCm. Affordable file from sports retailers. One of the most popular files in the range. Single.

The PS series is a great glide wax for training and competition with good gliding properties.The speed of the iron should be approx. 8-10 seconds on a skater ski. The wax can be reheated after cooling to room temperature (10 minutes) for better durability. Scrape after approx. one minute. It is important to have a good iron to achieve efficient melting of the wax. Our standard recipe PS6 has proven to be too good and is therefore continued in the new SWIX PRO series. The wax is very popular for both alpine and cross country skiing and has shown good performance on both natural and artificial snow. PS06 can be used alone as a racing wax or as a base for speed/finish products.Products. PS6 BLUE -6°C to -12°C (21°F to 10°F). Iron temperature 145° Replaces the CH06.

SWIX HS7 Liq. Violet, -2°C/-8°C, 125ml. HS liquid glide waxes are so easy to use that anyone can achieve a good result without having a special wax booth or lots of extra equipment. Glide wax spray is a popular choice for recreational skiers. High Speed (HS) has been specially developed for younger racers and the ambitious recreational skier. All waxes in this range have high performance and good durability. This makes them an affordable option for both competition and training. About liquid HS7: A liquid training and racing wax that can be used alone or as a base for other glide products. HS7L is best in typical winter conditions below 0°C. It copes well with a variety of snow conditions, regardless of humidity. A safe choice that delivers in its core range. Application of HS7L: Spray on the ski, wait 15 minutes and brush off with a T21 natural cork with felt. Amazing universal glide wax For training and racing Improves the glide of the skis Fluorine-free and 100% biodegradable Also available as hot wax Thoroughly tested under various conditions

The HS series is a great glide wax for training and competition with very good gliding properties. The speed of the wax should be approx. 8-10 seconds on a skater ski. The wax can be reheated after cooling to room temperature (10 min) for better durability. Strip off after hardening. It is important to have a good iron to achieve efficient melting of the wax. TIP: Allow waxed skis to harden for several hours. A versatile wax for normal winter conditions below freezing. Its hardness makes it easy to work with; a good end result is easy to achieve. HS07 can be used alone as a racing wax or as a base for speed/finish products HS6 Violet -2°C to -8°C Iron temperature 140°

SWIX Tuning gloves. Work glove Rubberized grip for good friction Thin to give a good feel when using tools

T104 15 cm. SWIX Viala file, fine. Traditional chrome-plated file with continuous cut, for finishing and light refreshing. Used in the World Cup and World Championships. 14 TPCm. 15 cm. SWIX Viala file. Traditional ski file. Excellent file for all For creating precise angles on side edges and base. 14 TPCm. Used in the World Cup and at World Championships One of the most popular files in the range.

Racing waxing table for skis and snowboards by Swix T76 waxing table, 120x45x90/85cm Weight: 13.3 kg. Anti-slip feet for optimum stability Height adjustable, 85 cm or 90 cm

The HS series is a great glide wax for training and competition with very good gliding properties. The speed of the wax iron should be approx. 8-10 seconds on a skater ski. The wax can be reheated after cooling to room temperature (10 min) for better durability. Strip off after hardening. It is important to have a good iron to achieve efficient melting of the wax. TIP: Allow waxed skis to harden for several hours. Our standard formulation HS6 has proven to be too good and is therefore being continued in the new SWIX PRO series. The wax is very popular for both alpine and cross-country skiing and has shown good properties on natural snow as well as on artificial snow.HS06 can be used alone as a racing wax or as a base for speed/finish products. HS6 BLUE -6°C to -12°C (21°F to 10°F). Iron temperature 155°

SWIX Nordic Single Ski 218cm.

Kit for maintenance of skis with integrated skins. Contains Skin Care (N15), Skin Cleaner (N16), glide wax (N19) and Fiberlene paper for application. Everything you need to get a better ski experience.

SWIX Bag for T76 and T76-2 waxing table.

Even pressure is very important when structuring a ski base. With the new SWIX structuring tool, you can adjust the pressure that is maintained throughout the process. You can easily adjust the pressure by moving the handle on the side up and down. The set comes with 4 different rollers. 1.0mm G, 1.0mm SR, 1.5mm SR and 0.5mm broken V texture roller. The SWIX structure tool gives you an even structure and improves glide on both skating and classic skis. In cold fresh snow it is recommended to set the tool at a lower pressure, in warmer conditions and transformed snow we recommend a higher pressure. Made in Norway. Structure tool with 4 rollers. Manual structure tool The most advanced structure tool that sets the pressure for you. Used by multiple nations, teams and professional waxers.