Sidas Ready to Fit Tongue Evo

The Sidas Heel Lifter Hard 6mm ensures a targeted fit in the ski boot or sports shoe. The 6 mm increase reduces the volume and significantly improves support in the heel area. Sidas Heel Lifter 6mm – more support and better position in the shoe If your shoe has too much play or you want to optimize your position, this heel lifter is a simple and effective solution. It raises the heel more and thus stabilizes the fit in the shoe. The self-adhesive pad can be inserted quickly and remains reliably in place. Ideal for boot fitting, ski boots or other sports shoes. Advantages Reduces volume in the shoe Improves support in the heel area 6 mm elevation for optimized position Self-adhesive for easy application Ideal for ski boots and sports shoes Product details Product: Sidas Heel Lifter Hard Height: 6 mm Feature: self-adhesive Function: Volume reduction and stabilization Area of application Ski boots Boot fitting Sports shoes Optimization of the fit FAQ What is a heel lifter used for? It reduces the volume in the shoe and improves support in the heel area. How is the lifter applied? Simply remove the protective film and stick the pad in the heel area. Which shoes is it suitable for? It is suitable for ski boots as well as for many other sports shoes. When to choose 6 mm instead of 4 mm? When more volume should be reduced or additional support is needed.

This volume reducer can be fitted under a Sidas insole to reduce boot volume. This gives the foot better support in the shoe, resulting in better precision and more comfort. Available in 4 mm. Can also be cut for a better fit to the shoe. Features: 1 pair (left + right) Height 4mm Dense EVA foam Perfect in hiking boots and outdoor shoes

Matching self-adhesive IPS Spoiler Cover for Sidas Tongue Spoiler. Is glued as a cover after installation and heated with a hot air dryer for optimum bonding. Contents: 2x Spoiler Cover

The Sidas Heel Lifter Hard 4mm ensures a targeted adjustment in the ski boot or sports shoe. The 4 mm elevation reduces the volume and significantly improves support in the heel area. Sidas Heel Lifter 4mm – more support and better position in the shoe If your shoe has too much play or you want to optimize your position, this heel lifter is a simple and effective solution. It slightly lifts the heel and thus stabilizes the fit in the shoe. The self-adhesive pad can be quickly inserted and stays reliably in place. Ideal for boot fitting, ski boots or other sports shoes. Advantages Reduces volume in the shoe Improves support in the heel area 4 mm elevation for better position Self-adhesive for easy application Ideal for ski boots and sports shoes Product details Product: Sidas Heel Lifter Hard Height: 4 mm Feature: self-adhesive Function: volume reduction and stabilization Field of application Ski boots Boot fitting Sports shoes Optimization of the fit FAQ What is a heel lifter used for? It reduces the volume in the shoe and improves support in the heel area. How is the lifter applied? Simply remove the protective film and stick the pad in the heel area. For which shoes is it suitable? It is suitable for ski boots as well as for many other sports shoes. What effect does the 4 mm elevation have? It improves the fit and can optimize the pressure distribution in the shoe.

With the tongue absorber Sidas Tongue Spoiler the distance between the shell and tongue can be reduced. Also helps with pain on the shin to reduce the pressure of the shell. The spoiler is: preformed self-adhesive grindable thermoformable 5 to 10 mm

One assembly of ski boot lifters in 3 mm, 5 mm or 7 mm Vibram brings clear advantages: The racing boots are protected when walking on hard surfaces and are not scratched. At the same time, the height is increased - a decisive factor, especially when racing. The 3 mm and 5 mm versions are FIS-approved and provide a more direct feel and more leverage in turns. For precise adjustment, we use a special milling machine that sets the ski boot nose and heel exactly to the desired height. Included in the service Professional fitting of the lift plates Precise milling to the correct height Processing time2-4 working days Return shipment of your ski boots - we automatically calculate the costs for this in the shopping cart according to your destination country Important information for customers outside Switzerland The shipping of the ski boots to us is at your own expense. Please not forget to order the desired lift plates in 3 mm, 5 mm or 7 mm at the same time - they are not included in the price. Requirements for processing The ski boot soles must be in good condition and must not show any rough damage For customers residing in Switzerland, there is a separate article that already includes return shipping.

With the BootDoc Skiboot Fit Mat Heel L black, you can quickly and easily adjust your ski boot if the heel has play or if there is a lack of support in the instep area. The self-adhesive pads specifically reduce volume in the inner boot and ensure more control and better power transmission. BootDoc Skiboot Fit Mat Heel L – more support in the heel area If your ski boot slips at the heel or offers too much space in the instep, you lose precision. This is exactly where the Fit Mat Heel L comes in. You simply stick the pads into the back of the inner boot. This reduces the volume and immediately provides a better fit, more support, and noticeably more direct power transmission to the ski. The black version is slightly softer and offers you additional comfort and padding – ideal if you value comfort as well as performance. Advantages at a glance Reduces volume in case of heel play or heel slippage Improves support in the ankle and instep area More control and better power transmission Self-adhesive and easy to install Softer BLACK version for more comfort Technical details Thickness: approx. 5 mm Size: One Size – 21–32 cm Mondopoint Scope of delivery: 2 pieces, self-adhesive Color: Black Mounting tip For permanent hold, we recommend additionally fixing the pads with strong adhesive tape. FAQ Who is the Fit Mat Heel L suitable for? For anyone whose ski boot slips at the heel or has too much volume in the instep area. Can I install the pads myself? Yes, you simply stick them into the back of the inner boot. Installation is straightforward. What are the benefits of reducing the volume? You get more support, better forward lean, and more direct power transmission to the ski. Is the BLACK version harder? No, it is softer and offers more comfort as well as additional padding.

With the Atomic EX-CENTER CUFF ALIGNMENT SET B, you can precisely adjust the shaft alignment of your ski boots. The set allows you to make exact adjustments for better control, more comfort, and optimal power transfer to the ski. Atomic EX-CENTER Cuff Alignment Set – precise shaft adjustment The correct shaft alignment is crucial for your position on the ski. With this genuine replacement part from Atomic, you can individually adjust the cuff alignment and thus correct misalignments. The set contains all necessary components for adjustment and ensures that your ski boot is optimally tailored to your leg axis. Ideal for sporty skiers, boot fitting, and service work. Advantages Precise adjustment of shaft alignment Improves control and power transfer Ideal for boot fitting and service Original Atomic replacement part Robust and durable components Scope of delivery Eccentric elements Screws and fastening parts Complete set for cuff alignment adjustment Field of application Ski boot adjustment (boot fitting) Service and repair Optimization of riding positionFor Atomic Redster Club SportFor Atomic Redster STI FAQ What is the cuff alignment set used for? It is used to adjust the shaft alignment of the ski boot to optimally align the leg axis. Does this improve performance? Yes, correct alignment ensures better control, more pressure on the edges, and a more stable ride. Can I install it myself? In principle, yes, but for optimal results we recommend adjustment by a boot fitting specialist. Is this an original Atomic replacement part? Yes, this is an original Atomic replacement part for compatible ski boots.

The Sidas IPS V Shape Size L pads provide better support in the ski boot and reduce play in the heel and ankle area. Ideal for boot fitting and individual adjustments. Sidas IPS V Shape – more grip in the ski boot If your ski boot has too much play in the heel or ankle area, control on the ski suffers. With the V-shaped IPS pads, you can adjust the inner boot and significantly improve the fit. The self-adhesive elements are simply attached to the inner boot and immediately provide more stability, a better fit and more precise power transmission. Advantages Reduces play in the heel and ankle area Improves grip and control in the ski boot Easy to attach to the inner boot Ideal for boot fitting and fine adjustment V-shape for targeted adjustment Product details Product: 2x Sidas IPS V Shape Size: L Application: Ski boot liner Type: Fitting Pads / Fitting elements Field of application Ski boots Boot fitting Optimization of the fit FAQ What are the IPS V Shape pads used for? They improve the hold in the ski boot, especially in the heel and ankle area. How are the pads fitted? The self-adhesive pads are attached directly to the inner boot. Who are the pads suitable for? For skiers whose ski boots have too much play or who want more control. Which size do I need? Size L is suitable for larger ski boots. There are corresponding smaller sizes for smaller models.

The Sidas IPS V Shape Cover 2x reliably protects your inserted V Shape Pads and ensures a long-lasting fixation in the ski boot. Ideal for boot fitting and professional adjustments.Sidas IPS V Shape Cover - protection and fixation for your V Shape PadsAfter inserting the IPS V Shape Pads, this self-adhesive cover protects the surface and ensures that the pads stay in place permanently. This keeps the fit stable and the hold in the ski boot constant.The application is simple: activate with a hot air dryer, apply and press on firmly. This creates a secure and clean connection.Advantages Protects IPS V Shape Pads from wear and tear Improves the durability of the fitting Self-adhesive for easy application Ensures a secure fit in the inner boot Ideal for boot fitting and service How to use Heat the cover slightly with a hot air dryer Place on the IPS V Shape Pads Press on firmly Allow to cool for permanent hold Product details Product: 2x Sidas IPS V Shape Cover Type: Protection and fixation cover Property: self-adhesive, thermally activatable Application: Ski boot liner FAQ What is the cover used for? It protects the IPS V Shape Pads and ensures a permanent fixation in the ski boot. How is the cover attached? Heat with a hot air dryer, apply and press on firmly. Is the cover necessary? It is recommended to increase the life of the pads and improve grip. Who is the product suitable for? For boot fitters and skiers who want to fit their ski boots precisely.