Dalbello DRS 130

The Dalbello Heel & Toe Alpine sole plates are high-quality spare parts for ski boots from the DS, Veloce, Panterra, JR 4, FXR and Cabrio. They ensure the optimum connection between ski boot and binding and guarantee precise power transmission on the piste. Compatibility & area of application These replacement soles are suitable for ski boots with a size from 225-345 mm suitable. They comply with the Alpine standard ISO 5355 and are intended exclusively for use with alpine bindings. Compatible models Dalbello DS Dalbello Veloce Dalbello Panterra Dalbello JR 4 Dalbello FXR Dalbello Convertible Product details Set: 1 pair (heel and toe plates) Size: 225-345 mm Standard: Alpine ISO 5355 Material: Durable, abrasion-resistant plastic Usage: Spare part to restore Alpine binding compatibility Fitting instructions The sole plates should be fitted by a specialist dealer or service technician to ensure the correct fit and function. After replacement, a binding check is recommended to verify safety. FAQ Can I use these sole plates for GripWalk bindings? No, these soles comply with the Alpine standard (ISO 5355) and are not suitable for GripWalk bindings. How do I know if I need new sole plates? If the contact surfaces are worn, uneven or damaged, the sole plates should be replaced to ensure safety and optimum power transmission. Can I replace just the heel or toe plate? It is possible, but it is recommended to always replace both plates in the set to maintain a consistent feel.

The Dalbello sole plates Heel & Toe Alpin are replacement soles for various Dalbello ski boot models. They ensure optimum grip and precise power transmission between boot and binding. The set consists of heel and toe plates and is compatible with several Dalbello models. Compatibility & fit The sole plates are suitable for the following models: BOSS IL Moro RAMPA JAKK JR 2 (from size 225 mm) Product details Set: 1 pair (heel & toe plate incl. screws) Size: 225-325 mm Standard: Alpine ISO 5355 Use: Spare part to restore binding compatibility Material: High-quality, abrasion-resistant plastic for a long service life Fitting instructions Assembly should be carried out by a specialist dealer or service technician to ensure correct positioning and safe functioning of the ski boots. A binding adjustment check is recommended after replacement. FAQ Do the sole plates also fit GripWalk ski boots? No, these sole plates comply with the Alpine standard (ISO 5355) and are not compatible with GripWalk bindings. Can I replace just one heel plate? Yes, it is possible, but it is recommended to replace both plates at the same time in order to maintain a consistent feel. How do I know if my soles need replacing? If the contact surfaces are worn or uneven, they should be replaced to ensure safety in the binding.

More edge grip, more direct power transmission and a sportier stance height: The Dalbello 5 mm Lifter Kit was developed for all DRS WC and DRS models with 97 mm last width developed. The set contains precisely fitting 3 mm plates including screw set and is the clean solution to increase the performance and precision of your DRS shoes. Key Features Compatibility: All Dalbello DRS WC & DRS models with 97 mm last width Performance update: +3 mm stand height for faster edge changes & more pressure on the shovel Perfect fit: Model-specific plates incl. complete screw sets Robust: Precisely manufactured lifters for long-lasting racing performance Scope of delivery 1 set of 5 mm lifter plates (for both shoes) Complete screw set Mounting instructions Mounting & Note For the initial assembly the shoe soles must be professionally milled milled. We offer this service - simply contact us by e-mail. Fitting should only be carried out by qualified workshops. After changes to the sole thickness, the Check for conformity to the standard and a binding adjustment (Z-value/AFD height) is mandatory. FAQ Do the lifters fit all DRS models? The kit is suitable for DRS WC and DRS models with 97 mm slat width designed. Separate kits are required for other slat widths/lines. Can I fit the lifts myself? We do not recommend not self-assembly. The soles must be milled and the bindings readjusted. Please contact a specialist workshop. Does the binding setting change? Yes, after lifting, the AFD height, pre-pressing and Z-value must be checked or adjusted to ensure standard-compliant release. What are the noticeable advantages of the 5 mm lifter? More leverage on the edge, more precise initiation, more stable guidance at speed and in icy passages - especially in racing and sporty piste skiing.

More edge grip, more direct power transmission and a sportier stance height: The Dalbello 3 mm Lifter Kit was developed for all DRS WC and DRS models with 97 mm last width developed. The set contains precisely fitting 3 mm plates including screw set and is the clean solution to increase the performance and precision of your DRS shoes. Key Features Compatibility: All Dalbello DRS WC & DRS models with 97 mm last width Performance update: +3 mm stand height for faster edge changes & more pressure on the shovel Perfect fit: Model-specific plates incl. complete screw sets Robust: Precisely manufactured lifters for long-lasting racing performance Scope of delivery 1 set of 3 mm lifter plates (for both shoes) Complete screw set Mounting instructions Mounting & Note For the initial assembly the shoe soles must be professionally milled milled. We offer this service - simply contact us by e-mail. Fitting should only be carried out by qualified workshops. After changes to the sole thickness, the checking for conformity with the standard (ISO 5355/GripWalk) and a binding adjustment (Z-value/AFD height) is mandatory. FAQ Do the lifters fit all DRS models? The kit is suitable for DRS WC and DRS models with 97 mm slat width designed. Separate kits are required for other slat widths/lines. Can I fit the lifts myself? We do not recommend not self-assembly. The soles must be milled and the bindings readjusted. Please contact a specialist workshop. Does the binding setting change? Yes, after lifting, the AFD height, pre-pressing and Z-value must be checked or adjusted to ensure standard-compliant release. What are the noticeable advantages of the 3 mm lifter? More leverage on the edge, more precise initiation, more stable guidance at speed and in icy passages - especially in racing and sporty piste skiing.

The Dalbello DRS 130 ski boot is based directly on the DRS World Cup-series and combines uncompromising performance with improved comfort. With its 98 mm last width, it offers a slightly roomier fit without sacrificing the precision and power transmission of a racing boot. The Flex 130 is aimed at sporty, experienced skiers who are looking for maximum control and comfort at the same time. Softer materials on the tongue and liner ensure a more pleasant distribution of pressure, while the optimized heel support provides stability and a natural stance. Advantages of the Dalbello DRS 130 World Cup DNA - Inspired by the DRS racing series with a little more comfort and space in the liner. Race-oriented flex 130 - For maximum control and direct power transmission. 98 mm last width - Precise fit with slightly extended comfort range. DB Comp 130 Liner - Softer tongue and lining for comfort without sacrificing performance. Optimized footbed - Additional heel support for stability and control. MyFit System - Thermo-adjustable liner and shell for individual fit. Fine adjustment options - Spoiler, lifter plates and sole plates can be individually adjusted. GripWalk compatible - Optional lifter replacement for better walking comfort and grip. Technical data ModelDalbello DRS 130 ColorDeep Green - Deep Green Flex130 Last width98 mm Shell materialRace PU Shaft materialRace PU LinerDB Comp 130 Closure4 micro buckles + 60 mm powerstrap Fitting systemMyFit - thermoformable SoleSolid Lug One Piece Bootsole CantingShaft alignment adjustable via pivot points StandardISO 5355 (Alpine) Target groupAdvanced to expert, men/women/unisex FAQ about the Dalbello DRS 130 Who is the DRS 130 suitable for? The ski boot is aimed at sporty skiers who are looking for direct, precise power transmission with racing performance. How does the DRS 130 differ from the DRS 140? The DRS 130 has a softer tongue and a more comfortable inner lining, while the DRS 140 is somewhat stiffer and more aggressively tuned. Can the ski boot be customized? Yes, thanks to MyFit both the shell and liner are thermoformable for a precise fit. Is the DRS 130 GripWalk compatible? Yes, the shoe can be retrofitted with optional GripWalk lifters for more comfort when walking. What are the benefits of the Solid Lug One Piece Bootsole design? The one-piece sole ensures maximum energy transfer and a direct, sensitive ride.

The Dalbello DRS 130 ski boot is based directly on the DRS World Cup-series and combines uncompromising performance with improved comfort. With its 98 mm last width, it offers a slightly roomier fit without sacrificing the precision and power transmission of a racing boot. The Flex 130 is aimed at sporty, experienced skiers who are looking for maximum control and comfort at the same time. Softer materials on the tongue and liner ensure a more pleasant distribution of pressure, while the optimized heel support provides stability and a natural stance. Advantages of the Dalbello DRS 130 World Cup DNA - Inspired by the DRS racing series with a little more comfort and space in the liner. Race-oriented flex 130 - For maximum control and direct power transmission. 98 mm last width - Precise fit with slightly extended comfort range. DB Comp 130 Liner - Softer tongue and lining for comfort without sacrificing performance. Optimized footbed - Additional heel support for stability and control. MyFit System - Thermo-adjustable liner and shell for individual fit. Fine adjustment options - Spoiler, lifter plates and sole plates can be individually adjusted. GripWalk compatible - Optional lifter replacement for better walking comfort and grip. Technical data ModelDalbello DRS 130 ColorDeep Green - Deep Green Flex130 Last width98 mm Shell materialRace PU Shaft materialRace PU LinerDB Comp 130 Closure4 micro buckles + 60 mm powerstrap Fitting systemMyFit - thermoformable SoleSolid Lug One Piece Bootsole CantingShaft alignment adjustable via pivot points StandardISO 5355 (Alpine) Target groupAdvanced to expert, men/women/unisex FAQ about the Dalbello DRS 130 Who is the DRS 130 suitable for? The ski boot is aimed at sporty skiers who are looking for direct, precise power transmission with racing performance. How does the DRS 130 differ from the DRS 140? The DRS 130 has a softer tongue and a more comfortable inner lining, while the DRS 140 is somewhat stiffer and more aggressively tuned. Can the ski boot be customized? Yes, thanks to MyFit both the shell and liner are thermoformable for a precise fit. Is the DRS 130 GripWalk compatible? Yes, the shoe can be retrofitted with optional GripWalk lifters for more comfort when walking. What are the benefits of the Solid Lug One Piece Bootsole design? The one-piece sole ensures maximum energy transfer and a direct, sensitive ride.

The Dalbello DRS 130 ski boot is based directly on the DRS World Cup-series and combines uncompromising performance with improved comfort. With its 98 mm last width, it offers a slightly roomier fit without sacrificing the precision and power transmission of a racing boot. The Flex 130 is aimed at sporty, experienced skiers who are looking for maximum control and comfort at the same time. Softer materials on the tongue and liner ensure a more pleasant distribution of pressure, while the optimized heel support provides stability and a natural stance. Advantages of the Dalbello DRS 130 World Cup DNA - Inspired by the DRS racing series with a little more comfort and space in the liner. Race-oriented flex 130 - For maximum control and direct power transmission. 98 mm last width - Precise fit with slightly extended comfort range. DB Comp 130 Liner - Softer tongue and lining for comfort without sacrificing performance. Optimized footbed - Additional heel support for stability and control. MyFit System - Thermo-adjustable liner and shell for individual fit. Fine adjustment options - Spoiler, lifter plates and sole plates can be individually adjusted. GripWalk compatible - Optional lifter replacement for better walking comfort and grip. Technical data ModelDalbello DRS 130 ColorDeep Green - Deep Green Flex130 Last width98 mm Shell materialRace PU Shaft materialRace PU LinerDB Comp 130 Closure4 micro buckles + 60 mm powerstrap Fitting systemMyFit - thermoformable SoleSolid Lug One Piece Bootsole CantingShaft alignment adjustable via pivot points StandardISO 5355 (Alpine) Target groupAdvanced to expert, men/women/unisex FAQ about the Dalbello DRS 130 Who is the DRS 130 suitable for? The ski boot is aimed at sporty skiers who are looking for direct, precise power transmission with racing performance. How does the DRS 130 differ from the DRS 140? The DRS 130 has a softer tongue and a more comfortable inner lining, while the DRS 140 is somewhat stiffer and more aggressively tuned. Can the ski boot be customized? Yes, thanks to MyFit both the shell and liner are thermoformable for a precise fit. Is the DRS 130 GripWalk compatible? Yes, the shoe can be retrofitted with optional GripWalk lifters for more comfort when walking. What are the benefits of the Solid Lug One Piece Bootsole design? The one-piece sole ensures maximum energy transfer and a direct, sensitive ride.