The TYROLIT LIFE elastic files Coarse are the powerful alternative to classic diamond files. They are ideal for fine polishing the edge surface and give your ski or snowboard edge an extremely high and long-lasting sharpness. Coarse elastic files – Uniform finish for maximum performance Thanks to their elastic structure, the files adapt perfectly to different ski radii. This creates an even contact zone along the entire edge – for a clean, controlled finish. The coarse version is perfect for refining the surface after sharpening and significantly increasing performance. In combination with the TYROLIT LIFE stainless steel angle you work precisely and reproducibly. Product advantages 2 pieces elastic files Coarse Ideal for fine polishing the edge surface Extremely high and long-lasting sharpness Uniform contact zone for all ski radii Application with TYROLIT LIFE stainless steel angle Microscopically tested and analyzed Premium quality Also available as a set FAQ What is the Coarse elastic file suitable for? For fine polishing the edge surface after sharpening. Why is elasticity an advantage? It ensures an even contact zone over the entire ski radius. Is the file also suitable for snowboards? Yes, it can be used for both skis and snowboards.

The TYROLIT LIFE ceramic files Medium are ideal for precise sharpening and controlled fine-tuning of your ski and snowboard edges. They reliably remove small burrs and ensure a clean, long-lasting surface quality. Medium ceramic files – sharpening and fine-tuning with control The medium grit is perfect for removing small burrs after pre-processing and further sharpening the edge. It optimally prepares the surface for the final finish and ensures an even, high-quality structure. In combination with the TYROLIT LIFE stainless steel angle you work precisely guided and reproducible. The files are microscopically tested and analyzed and stand for premium quality – made in Austria. Product advantages 2 pieces ceramic files medium Ideal for removing small burrs Perfect for sharpening and fine-tuning High and long-lasting surface quality Application with TYROLIT LIFE stainless steel angle Microscopically tested and analyzed Premium quality Also available as a set FAQ When do I use the Medium ceramic file? After rough pre-processing, to remove small burrs and further sharpen the edge. Is it suitable for skis and snowboards? Yes, it can be used for both sports equipment. Can I use them without an angle? For precise results, we recommend using the TYROLIT LIFE stainless steel angle.

The TYROLIT LIFE stainless steel angle 88° is the basis for precise edge tuning. With the fixed sharpening angle of 86°, you can work precisely and achieve a clean, razor-sharp edge – ideal for sporty skiers and tough piste conditions. Stainless steel angle 88° – Maximum precision for aggressive edge grip The angle was developed for use with steel, ceramic and elastic files and ensures even guidance when filing. Thanks to the stable stainless steel construction, the angle retains its shape permanently and guarantees reproducible results. An 87° side angle produces particularly sharp and aggressive edges – perfect for icy conditions and high speeds. Premium quality made in Tyrol. Product advantages Fixed sharpening angle 88° Suitable for steel, ceramic and elastic files Precise guidance for even sharpening Sturdy stainless steel construction Ideal for sporty setups and hard slopes Premium quality made in Tyrol Also available as a set FAQ Who is 88° suitable for? For sporty skiers and racers who want maximum edge grip on hard or icy slopes. Which files can I use with the angle? With steel, ceramic and elastic files. Is the angle also suitable for snowboards? Yes, it can be used for skis and snowboards.

The TYROLIT LIFE stainless steel angle 87° is the basis for precise edge tuning. With the fixed sharpening angle of 86°, you work precisely and achieve a clean, razor-sharp edge – ideal for sporty skiers and tough piste conditions. Stainless steel angle 87° – Maximum precision for aggressive edge grip The angle was developed for use with steel, ceramic and elastic files and ensures even guidance when filing. Thanks to the stable stainless steel construction, the angle retains its shape permanently and guarantees reproducible results. An 87° side angle produces particularly sharp and aggressive edges – perfect for icy conditions and high speeds. Premium quality made in Tyrol. Product advantages Fixed sharpening angle 87° Suitable for steel, ceramic and elastic files Precise guidance for even sharpening Sturdy stainless steel construction Ideal for sporty setups and hard slopes Premium quality made in Tyrol Also available as a set FAQ Who is 87° suitable for? For sporty skiers and racers who want maximum edge grip on hard or icy slopes. Which files can I use with the angle? With steel, ceramic and elastic files. Is the angle also suitable for snowboards? Yes, it can be used for skis and snowboards.

The TYROLIT LIFE stainless steel angle 86° is the basis for precise edge tuning. With the fixed sharpening angle of 86°, you work precisely and achieve a clean, razor-sharp edge – ideal for sporty riders and tough piste conditions. Stainless steel angle 86° – Maximum precision for aggressive edge grip The angle was developed for use with steel, ceramic and elastic files and ensures even guidance when filing. Thanks to the stable stainless steel construction, the angle remains dimensionally stable and guarantees reproducible results. An 86° side angle produces particularly sharp and aggressive edges – perfect for icy conditions and high speeds. Premium quality made in Tyrol. Product advantages Fixed sharpening angle 86° Suitable for steel, ceramic and elastic files Precise guidance for even sharpening Sturdy stainless steel construction Ideal for sporty setup and hard slopes Premium quality made in Tyrol Also available as a set FAQ Who is 86° suitable for? For sporty riders and racers who want maximum edge grip on hard or icy slopes. Which files can I use with the angle? With steel, ceramic and elastic files. Is the angle also suitable for snowboards? Yes, it can be used for skis and snowboards.

With the Tyrolit sidewall cutter, you can perfectly prepare your ski or snowboard edge for edge tuning. Before you file the edge, the sidewall must be cleanly trimmed back – this is exactly what this high-quality sidewall planer is made for. Tyrolit sidewall cutter – Precise preparation for clean edges The sidewall planer is equipped with two cutting blades in different geometries and radii – round and square. By simply turning and moving the cutting carriage forward and back horizontally, you can adapt the tool precisely to the respective ski or snowboard construction. The brass adjusting screw allows for edge-friendly depth limitation. This lets you precisely set the vertical distance between steel edge and sidewall, and at the same time define the cutting depth. You can also individually adjust the inclination of the blades to the sidewall. The result: free, clean steel edges – the perfect basis for precise filing. Premium quality made in Austria. TYROLIT is a partner of Ski Austria. Product advantages Depth limitation through edge-friendly brass adjusting screw Two cutting blades: round and square with different radii Individually adjustable blade inclination Exact definition of the cutting depth Ideal for preparation before edge filing Premium quality Made in Austria FAQ Why do I need a sidewall cutter? So the steel edge is freely accessible. This is the only way to file it cleanly and precisely. Is the tool suitable for skis and snowboards? Yes, the sidewall planer is suitable for both types of sports equipment. Can I adjust the cutting depth?

The TYROLIT LIFE edge rubber is your quick helper when the edge is rusty or a burr is in the way. You use it hand-guided, clean the edge and make it clean and controllable again, without a big setup. Tyrolit Edge rubber – Derusting, deburring, cleaning The sanding rubber is perfect for derusting, deburring and cleaning of ski and snowboard edges. Heavily rusted edges can be treated both laterally and on the base side. Ideal if you want to quickly tidy up the edge before filing or fix small problems on the go. Product advantages Universal sanding rubber for ski and snowboard edges Removes rust from heavily rusted edges laterally and on the base side Removes burrs for a clean edge grip Cleans the edge before filing and polishing Hand-guided application Premium quality Also available as a set Made in Austria Application Wipe the edge dry Guide the edge rubber with light pressure over the rusty or burred area Repeat several times for heavy rust Then, if necessary, continue working with a file or polishing file FAQ What is the best way to use the edge rubber? For derusting, deburring and cleaning the edge, especially before you start filing or polishing. Can I also use it to remove heavy rust spots? Yes, you can treat heavily rusted edges both laterally and on the base side. For stubborn rust, simply go over it several times. Is the edge rubber a substitute for filing? No, it prepares the edge and removes rust and burrs. For the exact angle and real sharpening, you need files and an angle.

The TYROLIT LIFE combi file is your practical companion for on the go. With two different grits in one tool, you can remove chipped edges and smooth your ski or snowboard edge straight away. Tyrolit combi file – quick resharpening on the slopes Whether professional racer or ambitious winter sports enthusiast – sharp edges are crucial for control, safety and fun on the slopes. The coarse side of the combi file reliably removes chipped edges, while the fine side smoothes the surface and ensures a clean finish. The file is used by hand and is ideal for quick corrections between runs. Made in Tyrol, it stands for genuine premium quality. Product advantages Combi file with two different grits Coarse side for chipped edges Fine side for smoothing the edge Hand-guided use Ideal for on the go Premium quality Also available as a set Made in Tyrol Care instructions To remove metal residue from the pores and expose the abrasive grain, occasionally clean the file with water, soap, and sandpaper (grit 400). FAQ When is the combi file useful? For quick corrections on the go or as a compact tool in your ski backpack. Is it suitable for skis and snowboards? Yes, it can be used for both types of sports equipment. Does it replace a complete edge tuning set? For on the go yes – for complete tuning, an extra angle and further files are recommended.

The TYROLIT LIFE ceramic files Fine are the ideal choice for the final fine-tuning of your ski and snowboard edges. They smooth and polish small scratches and ensure a precise, clean finish. Fine ceramic files – Perfect finish for maximum performance The finest version is ideal for the final smoothing of the edge surface. It gives your edge a high and long-lasting surface quality and ensures maximum control on the slopes. In combination with the TYROLIT LIFE stainless steel angle you work precisely guided and reproducible. The ceramic files are microscopically tested and analyzed and stand for premium quality – made in Austria. Product advantages 2 pieces ceramic files Fine Ideal for fine tuning and polishing Reliably smoothes small scratches Precise grinding for high surface quality Application with TYROLIT LIFE stainless steel angle Microscopically tested and analyzed Premium quality Also available as a set FAQ When do I use the Fine ceramic file? For the final fine tuning after sharpening or medium processing. Is it suitable for skis and snowboards? Yes, it is suitable for both sports equipment. Why is fine tuning important? It ensures a smooth surface, improved edge grip and long-lasting performance.

The TYROLIT LIFE ceramic files Coarse are ideal for powerful processing of heavily used ski and snowboard edges. They reliably remove hardened edges and large burrs. Coarse ceramic files – Effective pre-processing for clean edges The coarse design ensures efficient material removal and optimally prepares the edge for further tuning steps. At the same time, a high and long-lasting surface quality is achieved. In combination with the TYROLIT LIFE stainless steel angle you work with precise guidance and reproducibility. The ceramic files are microscopically tested and analyzed and stand for premium quality – made in Austria. Product advantages 2 pieces ceramic files Coarse Ideal for removing hardened edges Removes large burrs High and long-lasting surface quality Application with TYROLIT LIFE stainless steel angle Microscopically tested and analyzed Premium quality Also available as a set FAQ When do I use the Coarse ceramic file? For strong edge hardening or large burrs before fine tuning. Is it suitable for skis and snowboards? Yes, it is suitable for both sports equipment. Can I use them without an angle? For precise results, we recommend using the TYROLIT LIFE stainless steel angle.

With the Edge Tuning Set All in One 86° you can process ski and snowboard edges precisely and professionally. The high-quality 10-piece set made in Tyrol offers you everything you need for sharp, clean and durable edges – whether for hobby use or race preparation. Edge Tuning Set 86° – Precision from Tyrol The stainless steel angle with fixed 86° edge angle ensures perfect results in combination with two steel files, three ceramic files, two elastic files, a combination file and an edge rubber. All components are coordinated, microscopically tested and stand for real premium quality. Your advantages High-quality 10-piece edge tuning set made in Tyrol Stainless steel angle with precise 86° angle Premium quality – microscopically tested and analyzed Individual processing of ski and snowboard edges All products also available individually Contents of the set 2 stainless steel files (coarse & fine) for pre-processing and setup 3 handmade ceramic files (coarse, medium, fine) for sharpening and smoothing 2 elastic files (coarse & fine) for polishing and fine tuning Combination file for on the go (coarse & fine) Edge rubber for derusting, deburring and cleaning Stainless steel angle 86° Why 86°? An 86° side angle ensures extremely sharp, aggressive edges – ideal for hard and icy conditions as well as sporty, precise skiing. FAQ Who is the edge tuning set suitable for? For ambitious skiers, snowboarders and racers who want to sharpen their edges professionally themselves. Can I buy the individual tools separately? Yes, all components of the set are also available individually. Is the set also suitable for heavily damaged edges? Yes, the coarse steel file and the coarse ceramic file are ideal for pre-processing heavily damaged edges. Why are elastic files better than classic diamond files? Their elasticity creates an even contact zone along the entire ski radius, which enables a particularly clean finish.

The TYROLIT LIFE elastic files Race have been specially developed for racing and enable extremely precise edge processing. The set contains two elastic race files with different degrees of hardness for maximum control and performance. Race elastic files – racing precision for uncompromising edge grip Thanks to their increased hardness and dimensional stability, the race files ensure effective and extremely precise processing of the edge. At the same time, the elastic structure ensures an even contact zone along the entire ski radius – even with aggressive set-ups. In combination with the Tyrolit LIFE stainless steel angle you work precisely guided and reproducible. The files are microscopically tested and analyzed and stand for uncompromising premium quality – made in Austria. Product advantages 2 different elastic race files Specially developed for racing High hardness and dimensional stability for maximum precision Uniform contact zone for all ski radii Application with Tyrolit LIFE stainless steel angle Microscopically tested and analyzed Premium quality FAQ Who are the Race elastic files suitable for? For racers and ambitious skiers who demand maximum precision and edge grip. What distinguishes the Race version from other elastic files? The higher hardness and dimensional stability enable even more precise and effective edge processing. Can I also use the files for hobby use? Yes, they are also suitable for very ambitious recreational skiers who want racing quality.

The TYROLIT LIFE elastic files Fine are the ideal choice for the final polishing and fine tuning of your ski and snowboard edges. They remove the finest burrs and ensure a perfectly refined edge surface. Fine elastic files – Precise fine tuning for maximum control Thanks to their elastic structure, the files adapt perfectly to different ski radii and create an even contact zone along the entire edge. This allows you to achieve a clean, controlled finish with maximum precision. The fine version is particularly suitable for removing the finest burrs and for final polishing of the edge surface. In combination with the TYROLIT LIFE stainless steel angle you work precisely and reproducibly. Product advantages 2 pieces Fine elastic files Ideal for polishing and fine tuning Reliably removes the finest burrs Uniform contact zone for all ski radii Application with TYROLIT LIFE stainless steel angle Microscopically tested and analyzed Premium quality Also available as a set FAQ When do I use the Fine elastic file? For the final fine tuning and for removing the finest burrs after sharpening. Is the file suitable for skis and snowboards? Yes, it can be used for both sports equipment. Why is elasticity important? It ensures an even contact zone over the entire ski radius and therefore a clean finish.

The Tyrolit elastic files are the perfect solution for polishing and fine-tuning your ski and snowboard edges. With the two variants "coarse" and "fine", you can give your edges a precise, long-lasting finish. Tyrolit elastic files – fine-tuning with maximum control Thanks to their elastic structure, the files adapt perfectly to different ski radii and ensure an even contact zone along the entire edge. The coarse version is suitable for fine polishing the edge surface and gives it a high, long-lasting sharpness. With the fine version, you can remove the finest burrs and perfect the finish. In combination with the Tyrolit Life steel angle, you can achieve precise, reproducible results. The elastic files are microscopically tested and analyzed and stand for premium quality – made in Austria. Advantages of the Tyrolit elastic files 2 different versions: coarse and fine Ideal for polishing and perfecting the edge Elastic structure for an even contact zone Microscopically tested and analyzed Application with Tyrolit Life steel angle Premium quality Also available as a set Care instructions To remove metal residues from the pores and release the abrasive grain, it is recommended to occasionally clean with water, soap, and sandpaper (400 grit). FAQ What do I use the coarse elastic file for? For fine polishing the edge surface and for long-lasting sharpness. When do I use the fine version? For removing even the finest burrs and for the final fine-tuning. Why are elastic files advantageous? Their elasticity creates an even contact zone along the entire ski radius. Are the files also available as a set? Yes, they are available individually and are also part of a complete edge tuning set.

The Tyrolit ceramic files are your tool for clean, sharp and long-lasting ski edges. With three different grit sizes – coarse, medium and fine – you precisely cover all steps from removing edge chipping to fine-tuning. Tyrolit ceramic files – precision down to the last detail The handmade TYROLIT LIFE ceramic files reliably remove edge hardening, large and small burrs and ensure a high-quality surface finish. They are ideal for sharpening, smoothing and polishing your edges. The coarse file is used to work on severe damage or hardened edge areas. The medium grit is used to remove small burrs as well as for sharpening and fine-tuning. With the fine ceramic file, you achieve the final finish – smoothing, polishing and precise grinding for maximum performance. In combination with the TYROLIT LIFE stainless steel angle you work precisely guided and reproducibly. All files are microscopically tested and analyzed and stand for genuine premium quality – made in Austria. Advantages of the Tyrolit ceramic files 3 different grit sizes: coarse, medium, fine Removes edge chipping and hardening Ideal for sharpening, smoothing and polishing Microscopically tested and analyzed Application with TYROLIT LIFE stainless steel angle Premium quality Also available as a set FAQ When do I use the coarse ceramic file? For strong edge hardening or large burr formations. What is the medium grit intended for? For removing small burrs as well as for sharpening and fine-tuning. What does the fine ceramic file do? It provides the fine tuning, smoothes small scratches and gives the edge a precise finish. Are the files available individually? Yes, they are available individually and are also part of an edge tuning set.

The Tyrolit steel files are the basis for precise edge tuning for ski and snowboard. With a coarse (Coarse) and a fine (Fine) file, you can reliably cover both pre-processing and preparation for fine tuning. Tyrolit steel files – Precise material removal for perfect edges The coarse steel file is ideal for heavily damaged or heavily hardened edges. It enables high material removal and ensures clean preparation when setting a new edge angle. The fine 2nd-cut file is perfect for processing worn edges and as preparation for ceramic and elastic files. In combination with the TYROLIT LIFE stainless steel angle, you achieve precisely guided grinding and consistent results. The files impress with premium quality and durability – made in Austria. Advantages of the Tyrolit steel files 2 different files: Coarse and Fine Effective grinding with high material removal Ideal for pre-processing and angle adjustment Perfect preparation for ceramic and elastic files Application with TYROLIT LIFE stainless steel angle Premium quality Also available as a set FAQ What do I need the coarse file for? For heavily damaged edges, edge hardening or creating a new edge angle. When do I use the fine file? For worn edges and as preparation for fine tuning with ceramic or elastic files. Can I use the files without an angle? For precise results, use with the TYROLIT LIFE stainless steel angle is recommended. Are the files available individually or only as a set? They are available individually and are also part of a complete edge tuning set.

With the Edge Tuning Set All in One 88° you can sharpen your ski and snowboard edges precisely and with control. The high-quality 10-piece set made in Tyrol offers you all the tools for professional edge tuning – from coarse grinding to the finest finish. Edge Tuning Set 88° – Control and Versatility The stainless steel angle with fixed 88° side angle ensures a sporty but balanced edge. In combination with two steel files, three ceramic files, two elastic files, a combination file and an edge rubber, you achieve clean, reproducible results. All components are microscopically tested and stand for premium quality from Tyrol. Your advantages High-quality 10-piece edge tuning set made in Tyrol Stainless steel angle with precise 88° angle Premium quality – microscopically tested and analyzed Ideal for versatile slope conditions All products also available individually Contents of the set 2 stainless steel files (coarse & fine) for pre-processing and setup 3 handmade ceramic files (coarse, medium, fine) for sharpening and smoothing 2 elastic files (coarse & fine) for polishing and fine tuning Combination file for on the go (coarse & fine) Edge rubber for derusting, deburring and cleaning Stainless steel angle 88° Why 88°? An 88° side angle offers a very good balance of grip and forgiveness. It is ideal for sporty riders who want strong hold on hard slopes but at the same time prefer a versatile and everyday set-up. FAQ Who is the 88° edge tuning set suitable for? For sporty piste skiers and ambitious winter sports enthusiasts looking for a balanced combination of edge grip and control. Is 88° good for all-round use? Yes, 88° is a very popular standard angle for versatile slope conditions. Can I also use it to tune snowboards? Yes, the set is suitable for both skis and snowboards. Are individual tools available for purchase? Yes, all components of the set are also available separately.

With the Edge Tuning Set All in One 87° you can bring your ski and snowboard edges to a precise, sporty level. The high-quality 10-piece set made in Tyrol contains everything you need for clean, sharp, and durable edges – from coarse grinding to fine-tuning. Edge Tuning Set 87° – Precise Edges for Maximum Control The stainless steel angle with a fixed 87° side angle enables you to work precisely and achieve consistently reproducible results. In combination with two steel files, three ceramic files, two elastic files, a combination file, and an edge rubber, you can achieve professional results just like in a service center. All tools are microscopically tested and represent uncompromising premium quality. Your Advantages High-quality 10-piece edge tuning set made in Tyrol Stainless steel angle with precise 87° angle Premium quality – microscopically tested and analyzed Individual processing of ski and snowboard edges All products also available individually Contents of the Set 2 stainless steel files (coarse & fine) for pre-processing and setup 3 handmade ceramic files (coarse, medium, fine) for sharpening and smoothing 2 elastic files (coarse & fine) for polishing and fine-tuning Combination file for on the go (coarse & fine) Edge rubber for derusting, deburring, and cleaning Stainless steel angle 87° Why 87°? An 87° side angle offers an ideal balance between aggressive edge grip and everyday usability. Perfect for sporty riders who want maximum control on hard and icy slopes without sacrificing versatility. FAQ Who is the 87° edge tuning set suitable for? For sporty skiers and snowboarders who want precise edge grip and reliable performance on the slopes. Is 87° more suited for everyday use than 86°? Yes, 87° provides strong grip but remains slightly more forgiving and versatile than an extremely aggressive 86° angle. Can I repair damaged edges? Yes, with the coarse steel file and the coarse ceramic file, you can also prepare and rebuild heavily used edges. Are spare parts available individually? Yes, all tools in the set can also be purchased separately.